[PATCH 29/47] ARM: dts: r8a7793: Reference both DMA controllers in QSPI node

[Simon Horman]

From: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>

R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7793.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 88164ac44929..b16b0cca638c 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -785,8 +785,9 @@
 		reg = <0 0xe6b10000 0 0x2c>;
 		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
-		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+		       <&dmac1 0x17>, <&dmac1 0x18>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&cpg_clocks>;
 		num-cs = <1>;
 		#address-cells = <1>;
-- 
2.1.4