[PATCH 20/26] ARM: dts: r8a7794: Remove unnecessary clock-output-names properties
Simon Horman
horms+renesas at verge.net.au
Sun Apr 3 18:22:28 PDT 2016
* Fixed rate and fixed factor clocks do not require an
clock-output-names property.
* Since 07705583e920fef6 ("clk: shmobile: div6: Make clock-output-names
optional") Renesas div6 clocks do not require a clock-output-names
property.
In the above cases there is only one clock output and its name is taken
from that of the clock node. Accordingly, remove the unnecessary
clock-output-names properties and as necessary update the node names.
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
arch/arm/boot/dts/r8a7794.dtsi | 66 ++++++++++++++----------------------------
1 file changed, 22 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index eacb2b291361..7d7d18766540 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -836,12 +836,11 @@
ranges;
/* External root clock */
- extal_clk: extal_clk {
+ extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overriden by the board. */
clock-frequency = <0>;
- clock-output-names = "extal";
};
/* External SCIF clock */
@@ -865,173 +864,152 @@
#power-domain-cells = <0>;
};
/* Variable factor clocks */
- sd2_clk: sd2_clk at e6150078 {
+ sd2_clk: sd2 at e6150078 {
compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
reg = <0 0xe6150078 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
- clock-output-names = "sd2";
};
- sd3_clk: sd3_clk at e615026c {
+ sd3_clk: sd3 at e615026c {
compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
reg = <0 0xe615026c 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
- clock-output-names = "sd3";
};
- mmc0_clk: mmc0_clk at e6150240 {
+ mmc0_clk: mmc0 at e6150240 {
compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
reg = <0 0xe6150240 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
- clock-output-names = "mmc0";
};
/* Fixed factor clocks */
- pll1_div2_clk: pll1_div2_clk {
+ pll1_div2_clk: pll1_div2 {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <2>;
clock-mult = <1>;
- clock-output-names = "pll1_div2";
};
- zg_clk: zg_clk {
+ zg_clk: zg {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <6>;
clock-mult = <1>;
- clock-output-names = "zg";
};
- zx_clk: zx_clk {
+ zx_clk: zx {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <3>;
clock-mult = <1>;
- clock-output-names = "zx";
};
- zs_clk: zs_clk {
+ zs_clk: zs {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <6>;
clock-mult = <1>;
- clock-output-names = "zs";
};
- hp_clk: hp_clk {
+ hp_clk: hp {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <12>;
clock-mult = <1>;
- clock-output-names = "hp";
};
- i_clk: i_clk {
+ i_clk: i {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <2>;
clock-mult = <1>;
- clock-output-names = "i";
};
- b_clk: b_clk {
+ b_clk: b {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <12>;
clock-mult = <1>;
- clock-output-names = "b";
};
- p_clk: p_clk {
+ p_clk: p {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <24>;
clock-mult = <1>;
- clock-output-names = "p";
};
- cl_clk: cl_clk {
+ cl_clk: cl {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <48>;
clock-mult = <1>;
- clock-output-names = "cl";
};
- m2_clk: m2_clk {
+ m2_clk: m2 {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <8>;
clock-mult = <1>;
- clock-output-names = "m2";
};
- rclk_clk: rclk_clk {
+ rclk_clk: rclk {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <(48 * 1024)>;
clock-mult = <1>;
- clock-output-names = "rclk";
};
- oscclk_clk: oscclk_clk {
+ oscclk_clk: oscclk {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <(12 * 1024)>;
clock-mult = <1>;
- clock-output-names = "oscclk";
};
- zb3_clk: zb3_clk {
+ zb3_clk: zb3 {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
#clock-cells = <0>;
clock-div = <4>;
clock-mult = <1>;
- clock-output-names = "zb3";
};
- zb3d2_clk: zb3d2_clk {
+ zb3d2_clk: zb3d2 {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
#clock-cells = <0>;
clock-div = <8>;
clock-mult = <1>;
- clock-output-names = "zb3d2";
};
- ddr_clk: ddr_clk {
+ ddr_clk: ddr {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
#clock-cells = <0>;
clock-div = <8>;
clock-mult = <1>;
- clock-output-names = "ddr";
};
- mp_clk: mp_clk {
+ mp_clk: mp {
compatible = "fixed-factor-clock";
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
clock-div = <15>;
clock-mult = <1>;
- clock-output-names = "mp";
};
- cp_clk: cp_clk {
+ cp_clk: cp {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
#clock-cells = <0>;
clock-div = <48>;
clock-mult = <1>;
- clock-output-names = "cp";
};
- acp_clk: acp_clk {
+ acp_clk: acp {
compatible = "fixed-factor-clock";
clocks = <&extal_clk>;
#clock-cells = <0>;
clock-div = <2>;
clock-mult = <1>;
- clock-output-names = "acp";
};
/* Gate clocks */
--
2.1.4
More information about the linux-arm-kernel
mailing list