[PATCH 07/26] ARM: dts: porter: use generic pinctrl properties
Simon Horman
horms+renesas at verge.net.au
Sun Apr 3 18:22:15 PDT 2016
Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and
groups properties") renesas pfc drivers accept generic "function", "pins"
and "groups" properties.
This patch updates the porter device tree to use the generic properties.
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
arch/arm/boot/dts/r8a7791-porter.dts | 60 ++++++++++++++++++------------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 6c08314427d6..af3751ff519a 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -147,78 +147,78 @@
pinctrl-names = "default";
scif0_pins: serial0 {
- renesas,groups = "scif0_data_d";
- renesas,function = "scif0";
+ groups = "scif0_data_d";
+ function = "scif0";
};
scif_clk_pins: scif_clk {
- renesas,groups = "scif_clk";
- renesas,function = "scif_clk";
+ groups = "scif_clk";
+ function = "scif_clk";
};
ether_pins: ether {
- renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
- renesas,function = "eth";
+ groups = "eth_link", "eth_mdio", "eth_rmii";
+ function = "eth";
};
phy1_pins: phy1 {
- renesas,groups = "intc_irq0";
- renesas,function = "intc";
+ groups = "intc_irq0";
+ function = "intc";
};
sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
- renesas,function = "sdhi0";
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
};
sdhi2_pins: sd2 {
- renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
- renesas,function = "sdhi2";
+ groups = "sdhi2_data4", "sdhi2_ctrl";
+ function = "sdhi2";
};
qspi_pins: spi0 {
- renesas,groups = "qspi_ctrl", "qspi_data4";
- renesas,function = "qspi";
+ groups = "qspi_ctrl", "qspi_data4";
+ function = "qspi";
};
i2c2_pins: i2c2 {
- renesas,groups = "i2c2";
- renesas,function = "i2c2";
+ groups = "i2c2";
+ function = "i2c2";
};
usb0_pins: usb0 {
- renesas,groups = "usb0";
- renesas,function = "usb0";
+ groups = "usb0";
+ function = "usb0";
};
usb1_pins: usb1 {
- renesas,groups = "usb1";
- renesas,function = "usb1";
+ groups = "usb1";
+ function = "usb1";
};
vin0_pins: vin0 {
- renesas,groups = "vin0_data8", "vin0_clk";
- renesas,function = "vin0";
+ groups = "vin0_data8", "vin0_clk";
+ function = "vin0";
};
can0_pins: can0 {
- renesas,groups = "can0_data";
- renesas,function = "can0";
+ groups = "can0_data";
+ function = "can0";
};
du_pins: du {
- renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
- renesas,function = "du";
+ groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+ function = "du";
};
ssi_pins: sound {
- renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
- renesas,function = "ssi";
+ groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+ function = "ssi";
};
audio_clk_pins: audio_clk {
- renesas,groups = "audio_clk_a";
- renesas,function = "audio_clk";
+ groups = "audio_clk_a";
+ function = "audio_clk";
};
};
--
2.1.4
More information about the linux-arm-kernel
mailing list