[PATCH v3 1/4] arm64: defconfig: Enable devices for Hi6220 and 96boards HiKey

Guodong Xu guodong.xu at linaro.org
Sat Apr 2 04:47:51 PDT 2016


This patch enables a number of devices currently supported by the Hi6220
and 96boards HiKey. These include
a) Hi655x PMIC and regulator
b) Hi6220 I2C, USB, MMC, mailbox, and reset
c) CONFIG_PINCTRL_SINGLE, and CONFIG_LEDS_GPIO

v2:
 - rebase to next-20160310, CONFIG_MMC_BLOCK_MINORS=16 is already in.
 - set CONFIG_I2C_DESIGNWARE_PLATFORM to be build as module

Signed-off-by: Guodong Xu <guodong.xu at linaro.org>
Reviewed-by: Arnd Bergmann <arnd at arndb.de>
---
 arch/arm64/configs/defconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f705051..32b4f2d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -146,6 +146,7 @@ CONFIG_VIRTIO_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=m
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_QUP=y
 CONFIG_I2C_UNIPHIER_F=y
@@ -154,6 +155,7 @@ CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_QUP=y
 CONFIG_SPMI=y
+CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_GPIO_SYSFS=y
@@ -170,8 +172,10 @@ CONFIG_THERMAL_EMULATION=y
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_HI655X_PMIC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_HI655X=y
 CONFIG_REGULATOR_QCOM_SMD_RPM=y
 CONFIG_REGULATOR_QCOM_SPMI=y
 CONFIG_REGULATOR_S2MPS11=y
@@ -196,6 +200,7 @@ CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC2=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
@@ -215,9 +220,11 @@ CONFIG_MMC_SPI=y
 CONFIG_MMC_SUNXI=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_K3=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_SYSCON=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@@ -244,6 +251,8 @@ CONFIG_COMMON_CLK_QCOM=y
 CONFIG_MSM_GCC_8916=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_ARM_SMMU=y
+CONFIG_MAILBOX=y
+CONFIG_HI6220_MBOX=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD=y
 CONFIG_QCOM_SMD_RPM=y
@@ -252,6 +261,8 @@ CONFIG_ARCH_TEGRA_210_SOC=y
 CONFIG_HISILICON_IRQ_MBIGEN=y
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_COMMON_RESET_HI6220=y
+CONFIG_PHY_HI6220_USB=y
 CONFIG_PHY_XGENE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-- 
1.9.1




More information about the linux-arm-kernel mailing list