[PATCH v2] ARM: dts: dra7: Correct clock tree for sys_32k_ck

[Tero Kristo]

On 04/01/2016 06:36 PM, Tony Lindgren wrote:
> Hi,
>
> * Tony Lindgren <tony at atomide.com> [160331 10:04]:
>> * Keerthy <a0393675 at ti.com> [160331 02:26]:
>>>
>>>
>>> On Thursday 31 March 2016 12:00 PM, Tero Kristo wrote:
>>>> On 03/31/2016 12:32 AM, Tony Lindgren wrote:
>>>>> * Tony Lindgren <tony at atomide.com> [160330 14:19]:
>>>>>> * Keerthy <j-keerthy at ti.com> [160314 05:04]:
>>>>>>> This is w.r.t J6/J6eco: 32clk is pseudo (erratum i856) - clock source.
>>>>>>> Errata i856 for the AM572x (DRA7xx) points out that the 32.768KHz
>>>>>>> external
>>>>>>> crystal is not enabled at power up. Instead the CPU falls back to using
>>>>>>> an emulation for the 32KHz clock which is SYSCLK1/610.  SYSCLK1 is
>>>>>>> usually
>>>>>>> 20MHz on boards so far (which gives an emulated frequency of 32.786KHz)
>>>>>>
>>>>>> Thanks applying into omap-for-v4.6/fixes.
>>>>>
>>>>> Actually let's wait a review from Tero on this one, not sure
>>>>> about the pseudo clock naming here. So dropping for now.
>>>>
>>>> The patch is fine for me, I didn't comment anything before as I thought
>>>> you already applied it.
>>>>
>>>> Acked-by: Tero Kristo <t-kristo at ti.com>
>>>
>>> Thanks Tero.
>>
>> OK applying with Tero's ack.
>
> I'm dropping this again as it introduces new warnings with make dtbs:
>
> Warning (reg_format): "reg" property in /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
> Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck
> Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck
>    DTC     arch/arm/boot/dts/am57xx-cl-som-am57x.dtb
> Warning (reg_format): "reg" property in /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
> Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck
> Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck
>    DTC     arch/arm/boot/dts/am57xx-sbc-am57x.dtb
> Warning (reg_format): "reg" property in /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
> Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck
> Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck
>    DTC     arch/arm/boot/dts/dra7-evm.dtb
> Warning (reg_format): "reg" property in /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
> Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck
> Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck
>    DTC     arch/arm/boot/dts/dra72-evm.dtb
> Warning (reg_format): "reg" property in /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
> Warning (avoid_default_addr_size): Relying on default #address-cells value for /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck
> Warning (avoid_default_addr_size): Relying on default #size-cells value for /ocp/l4 at 4a000000/cm_core at 8000/clockdomains/sys_32k_ck
>
> Regards,
>
> Tony
>

Looks like a merge conflict to me, sys_32k_ck has gone under 
clockdomains for some reason. It should be under clocks.

-Tero