[PATCH 2/3] ARM: multi_v7_defconfig: Switch BCM2835 to sdhci-iproc.c for MMC

Eric Anholt eric at anholt.net
Fri Apr 1 08:48:49 PDT 2016


Stephen Warren <swarren at wwwdotorg.org> writes:

> On 03/31/2016 06:28 PM, Eric Anholt wrote:
>> This approximately triples write performance for the SD card.  My card
>> is too full of important data to collect very reliable numbers, but I
>> see 271.361% +/- 166.742% improvement (n=3 before, 6 after), for 'dd
>> if=/dev/zero of=/boot/asdf bs=1M count=3 oflag=dsync,direct'.  Read
>> performance appears to be unaffected.
>
> I thought that switching the defconfig wasn't possible, since this HW 
> module relies on the SoC core clock, and that can be asynchronously 
> changed by the FW running on the VideoCore. Consequently, this change 
> isn't safe unless the user puts non-default options in their config.txt.
>
> The same comment applies to "[PATCH 1/4] ARM: bcm2835: Switch BCM2835 to 
> sdhci-iproc.c for MMC" in the other series.

I think you're thinking of SDHOST, the other controller?  This is just
switching implementations for the EMMC controller so that eventually we
can delete our old implementation.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 818 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160401/9c01358e/attachment.sig>


More information about the linux-arm-kernel mailing list