[PATCH v2 06/11] phy: da8xx-usb: new driver for DA8XX SoC USB PHY
Kishon Vijay Abraham I
kishon at ti.com
Fri Apr 1 06:16:28 PDT 2016
Hi,
On Thursday 17 March 2016 07:56 AM, David Lechner wrote:
> This is a new phy driver for the SoC USB controllers on the TI DA8XX
> family of microcontrollers. The USB 1.1 PHY is just a simple on/off.
> The USB 2.0 PHY also allows overriding the VBUS and ID pins.
>
> Signed-off-by: David Lechner <david at lechnology.com>
> ---
>
> v2 changes: This is new patch in v2.
>
>
>
> drivers/phy/Kconfig | 9 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-da8xx-usb.c | 295 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 305 insertions(+)
> create mode 100644 drivers/phy/phy-da8xx-usb.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 26566db..a6060ea 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -35,6 +35,15 @@ config ARMADA375_USBCLUSTER_PHY
> depends on OF && HAS_IOMEM
> select GENERIC_PHY
>
> +config PHY_DA8XX_USB
> + tristate "TI DA8XX USB PHY Driver"
> + depends on ARCH_DAVINCI_DA8XX
> + select GENERIC_PHY
> + help
> + Enable this to support the USB PHY on DA8XX SoCs.
> +
> + This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
> +
> config PHY_DM816X_USB
> tristate "TI dm816x USB PHY driver"
> depends on ARCH_OMAP2PLUS
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 24596a9..722e01c 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -5,6 +5,7 @@
> obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
> obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
> +obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
> obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
> obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
> obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
> diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c
> new file mode 100644
> index 0000000..93a5f4d
> --- /dev/null
> +++ b/drivers/phy/phy-da8xx-usb.c
> @@ -0,0 +1,295 @@
> +/*
> + * phy-da8xx-usb - TI DaVinci DA8XX USB PHY driver
> + *
> + * Copyright (C) 2016 David Lechner <david at lechnology.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/module.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/usb/gadget.h>
> +#include <linux/usb/musb.h>
> +#include <linux/usb/otg.h>
> +
> +/* DA8xx CFGCHIP2 (USB PHY Control) register bits */
> +#define PHYCLKGD (1 << 17)
> +#define VBUSSENSE (1 << 16)
> +#define RESET (1 << 15)
> +#define OTGMODE_MASK (3 << 13)
> +#define NO_OVERRIDE (0 << 13)
> +#define FORCE_HOST (1 << 13)
> +#define FORCE_DEVICE (2 << 13)
> +#define FORCE_HOST_VBUS_LOW (3 << 13)
> +#define USB1PHYCLKMUX (1 << 12)
> +#define USB2PHYCLKMUX (1 << 11)
> +#define PHYPWRDN (1 << 10)
> +#define OTGPWRDN (1 << 9)
> +#define DATPOL (1 << 8)
> +#define USB1SUSPENDM (1 << 7)
> +#define PHY_PLLON (1 << 6)
> +#define SESENDEN (1 << 5)
> +#define VBDTCTEN (1 << 4)
> +#define REFFREQ_MASK (0xf << 0)
> +#define REFFREQ_12MHZ (1 << 0)
> +#define REFFREQ_24MHZ (2 << 0)
> +#define REFFREQ_48MHZ (3 << 0)
> +#define REFFREQ_19_2MHZ (4 << 0)
> +#define REFFREQ_38_4MHZ (5 << 0)
> +#define REFFREQ_13MHZ (6 << 0)
> +#define REFFREQ_26MHZ (7 << 0)
> +#define REFFREQ_20MHZ (8 << 0)
> +#define REFFREQ_40MHZ (9 << 0)
> +
> +struct da8xx_usbphy {
> + struct phy_provider *phy_provider;
> + struct phy *usb11_phy;
> + struct phy *usb20_phy;
> + struct clk *usb11_clk;
> + struct clk *usb20_clk;
> + void __iomem *phy_ctrl;
> +};
> +
> +static inline u32 da8xx_usbphy_readl(void __iomem *base)
> +{
> + return readl(base);
> +}
> +
> +static inline void da8xx_usbphy_writel(void __iomem *base, u32 value)
> +{
> + writel(value, base);
> +}
> +
> +static int da8xx_usb11_phy_init(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + int ret;
> + u32 val;
> +
> + ret = clk_prepare_enable(d_phy->usb11_clk);
> + if (ret)
> + return ret;
> +
> + val = da8xx_usbphy_readl(d_phy->phy_ctrl);
> + val |= USB1SUSPENDM;
> + da8xx_usbphy_writel(d_phy->phy_ctrl, val);
> +
> + return 0;
> +}
> +
> +static int da8xx_usb11_phy_shutdown(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + u32 val;
> +
> + val = da8xx_usbphy_readl(d_phy->phy_ctrl);
> + val &= ~USB1SUSPENDM;
> + da8xx_usbphy_writel(d_phy->phy_ctrl, val);
> +
> + clk_disable_unprepare(d_phy->usb11_clk);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops da8xx_usb11_phy_ops = {
> + .power_on = da8xx_usb11_phy_init,
> + .power_off = da8xx_usb11_phy_shutdown,
> + .owner = THIS_MODULE,
> +};
> +
> +static int da8xx_usb20_phy_init(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + int ret;
> + u32 val;
> +
> + ret = clk_prepare_enable(d_phy->usb20_clk);
> + if (ret)
> + return ret;
> +
> + val = da8xx_usbphy_readl(d_phy->phy_ctrl);
> + val &= ~OTGPWRDN;
> + da8xx_usbphy_writel(d_phy->phy_ctrl, val);
> +
> + return 0;
> +}
> +
> +static int da8xx_usb20_phy_shutdown(struct phy *phy)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + u32 val;
> +
> + val = da8xx_usbphy_readl(d_phy->phy_ctrl);
> + val |= OTGPWRDN;
> + da8xx_usbphy_writel(d_phy->phy_ctrl, val);
> +
> + clk_disable_unprepare(d_phy->usb20_clk);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops da8xx_usb20_phy_ops = {
> + .power_on = da8xx_usb20_phy_init,
> + .power_off = da8xx_usb20_phy_shutdown,
> + .owner = THIS_MODULE,
> +};
> +
> +int da8xx_usb20_phy_set_mode(struct phy *phy, enum musb_mode mode)
> +{
> + struct da8xx_usbphy *d_phy = phy_get_drvdata(phy);
> + u32 val;
> +
> + val = da8xx_usbphy_readl(d_phy->phy_ctrl);
> +
> + val &= ~OTGMODE_MASK;
> + switch (mode) {
> + case MUSB_HOST: /* Force VBUS valid, ID = 0 */
> + val |= FORCE_HOST;
> + break;
> + case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
> + val |= FORCE_DEVICE;
> + break;
> + case MUSB_OTG: /* Don't override the VBUS/ID comparators */
> + val |= NO_OVERRIDE;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + da8xx_usbphy_writel(d_phy->phy_ctrl, val);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(da8xx_usb20_phy_set_mode);
Don't prefer export symbols from PHY driver. That'll create unnecessary
dependencies between the controller and the PHY.
I think it'll be better to create a new attribute and use it?
8<============
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 8cf05e3..3d92b9b 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -22,6 +22,13 @@
struct phy;
+enum phy_mode {
+ PHY_MODE_INVALID,
+ PHY_MODE_USB_HOST,
+ PHY_MODE_USB_DEVICE,
+ PHY_MODE_USB_OTG,
+};
+
/**
* struct phy_ops - set of function pointers for performing phy operations
* @init: operation to be performed for initializing phy
@@ -44,6 +51,7 @@ struct phy_ops {
*/
struct phy_attrs {
u32 bus_width;
+ enum phy_mode mode;
};
/**
@@ -127,6 +135,14 @@ static inline void phy_set_bus_width(struct phy *phy, int
bus_width)
{
phy->attrs.bus_width = bus_width;
}
+static inline enum phy_mode phy_get_mode(struct phy *phy)
+{
+ return phy->attrs.mode;
+}
+static inline void phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+ phy->attrs.mode = mode;
+}
struct phy *phy_get(struct device *dev, const char *string);
struct phy *phy_optional_get(struct device *dev, const char *string);
struct phy *devm_phy_get(struct device *dev, const char *string);
@@ -234,6 +250,16 @@ static inline void phy_set_bus_width(struct phy *phy, int
bus_width)
return;
}
+static inline enum phy_mode phy_get_mode(struct phy *phy)
+{
+ return PHY_MODE_INVALID;
+}
+
+static inline void phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+ return;
+}
+
static inline struct phy *phy_get(struct device *dev, const char *string)
{
return ERR_PTR(-ENOSYS);
=====================>8
Thanks
Kishon
> +
> +static struct phy *da8xx_usbphy_of_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> + struct da8xx_usbphy *d_phy = dev_get_drvdata(dev);
> +
> + if (!d_phy)
> + return ERR_PTR(-ENODEV);
> +
> + switch (args->args[0]) {
> + case 1:
> + return d_phy->usb11_phy;
> + case 2:
> + return d_phy->usb20_phy;
> + default:
> + return ERR_PTR(-EINVAL);
> + }
> +}
> +
> +static int da8xx_usbphy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->of_node;
> + struct da8xx_usbphy *d_phy;
> + struct resource *res;
> +
> + d_phy = devm_kzalloc(dev, sizeof(*d_phy), GFP_KERNEL);
> + if (!d_phy)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + d_phy->phy_ctrl = devm_ioremap_resource(dev, res);
> + if (IS_ERR(d_phy->phy_ctrl)) {
> + dev_err(dev, "Failed to map resource.\n");
> + return PTR_ERR(d_phy->phy_ctrl);
> + }
> +
> + d_phy->usb11_clk = devm_clk_get(dev, "usb11_phy");
> + if (IS_ERR(d_phy->usb11_clk)) {
> + dev_err(dev, "Failed to get usb11_phy clock.\n");
> + return PTR_ERR(d_phy->usb11_clk);
> + }
> +
> + d_phy->usb20_clk = devm_clk_get(dev, "usb20_phy");
> + if (IS_ERR(d_phy->usb20_clk)) {
> + dev_err(dev, "Failed to get usb20_phy clock.\n");
> + return PTR_ERR(d_phy->usb20_clk);
> + }
> +
> + d_phy->usb11_phy = devm_phy_create(dev, node, &da8xx_usb11_phy_ops);
> + if (IS_ERR(d_phy->usb11_phy)) {
> + dev_err(dev, "Failed to create usb11 phy.\n");
> + return PTR_ERR(d_phy->usb11_phy);
> + }
> +
> + d_phy->usb20_phy = devm_phy_create(dev, node, &da8xx_usb20_phy_ops);
> + if (IS_ERR(d_phy->usb20_phy)) {
> + dev_err(dev, "Failed to create usb20 phy.\n");
> + return PTR_ERR(d_phy->usb20_phy);
> + }
> +
> + platform_set_drvdata(pdev, d_phy);
> + phy_set_drvdata(d_phy->usb11_phy, d_phy);
> + phy_set_drvdata(d_phy->usb20_phy, d_phy);
> +
> + if (node) {
> + d_phy->phy_provider = devm_of_phy_provider_register(dev,
> + da8xx_usbphy_of_xlate);
> + if (IS_ERR(d_phy->phy_provider)) {
> + dev_err(dev, "Failed to create phy provider.\n");
> + return PTR_ERR(d_phy->phy_provider);
> + }
> + } else {
> + int ret;
> +
> + ret = phy_create_lookup(d_phy->usb11_phy, "usbphy", "ohci.0");
> + if (ret)
> + dev_warn(dev, "Failed to create usb11 phy lookup .\n");
> + ret = phy_create_lookup(d_phy->usb20_phy, "usbphy", "musb-da8xx");
> + if (ret)
> + dev_warn(dev, "Failed to create usb20 phy lookup .\n");
> + }
> +
> + return 0;
> +}
> +
> +static int da8xx_usbphy_remove(struct platform_device *pdev)
> +{
> + struct da8xx_usbphy *d_phy = platform_get_drvdata(pdev);
> +
> + if (!pdev->dev.of_node) {
> + phy_remove_lookup(d_phy->usb20_phy, "usbphy", "musb-da8xx");
> + phy_remove_lookup(d_phy->usb11_phy, "usbphy", "ohci.0");
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id da8xx_usbphy_ids[] = {
> + { .compatible = "ti,da830-usbphy" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, da8xx_usbphy_ids);
> +
> +static struct platform_driver da8xx_usbphy_driver = {
> + .probe = da8xx_usbphy_probe,
> + .remove = da8xx_usbphy_remove,
> + .driver = {
> + .name = "da8xx-usbphy",
> + .of_match_table = da8xx_usbphy_ids,
> + },
> +};
> +
> +module_platform_driver(da8xx_usbphy_driver);
> +
> +MODULE_ALIAS("platform:da8xx-usbphy");
> +MODULE_AUTHOR("David Lechner <david at lechnology.com>");
> +MODULE_DESCRIPTION("TI DA8XX USB PHY driver");
> +MODULE_LICENSE("GPL v2");
>
More information about the linux-arm-kernel
mailing list