[RESEND][PATCH v3 0/9] ARM: dts: update Boundary Devices boards support

[Gary Bisson]

Hi all,

This is just a resend of my v3 with Shawn's correct e-mail address. I've also
made sure it applies (and builds) on latest linux-next 20150930.

This series is a follow-up to the previous series that added LCD display
support.
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-August/364425.html

This one aims at adding touchscreen and WiFi support for Nitrogen6x as well as
adding two boards: Nitrogen6_Max and Nit6xlite.

It also takes care of updating the licenses to be GPLv2/X11.

The series has been tested against linux-next tag next-20150909.

Note that imx_v6_v7_defconfig has been used with the following additions:
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_I2C_MUX_GPIO=y
CONFIG_RTC_DRV_M41T80=y

Modifications:
v2->v3:
- Rename nodes to general class of device as suggested by Philipp and Russell.
- Remove useless wakeup-gpio field for edt,ft5x06 touchscreen
- Add missing muxing for interrupt GPIO
- Rebased on next-20150909
v1->v2:
- Add Boundary Devices Inc. to vendor prefixes
- Relicense devices trees to GPLv2/X11 as suggested by Fabio for:
  - Nitrogen6x
  - SabreLite
  - Nit6xLite
  - Nitrogen6_MAX
- Change manufacturer to Boundary Devices as suggested by Fabio for:
  - Nitrogen6x
  - Nit6xLite
  - Nitrogen6_MAX
- Fixed missing macros for gpio/irq values as suggested by Philipp.
- Rebased on next-20150908

Regards,
Gary

Gary Bisson (9):
  ARM: dts: imx6dql-nitrogen6x: add touchscreen support
  ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support
  ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11
  ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11
  of: Add Boundary Devices Inc. vendor prefix
  ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices
  ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices
  ARM: dts: imx: add Boundary Devices Nitrogen6_Max board
  ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board

 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   2 +
 arch/arm/boot/dts/imx6dl-nit6xlite.dts             |  49 ++
 arch/arm/boot/dts/imx6dl-nitrogen6x.dts            |  44 +-
 arch/arm/boot/dts/imx6dl-sabrelite.dts             |  40 +-
 arch/arm/boot/dts/imx6q-nitrogen6_max.dts          |  53 ++
 arch/arm/boot/dts/imx6q-nitrogen6x.dts             |  44 +-
 arch/arm/boot/dts/imx6q-sabrelite.dts              |  40 +-
 ...6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} | 396 ++++++----
 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi       | 873 +++++++++++++++++++++
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi          | 111 ++-
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi           |  40 +-
 12 files changed, 1523 insertions(+), 170 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts
 create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts
 copy arch/arm/boot/dts/{imx6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} (50%)
 create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi

-- 
2.5.3