[PATCH 1/2] ARM: shmobile: r8a7794: add USB PHY DT support

[Simon Horman]

On Thu, Sep 17, 2015 at 02:15:58AM +0300, Sergei Shtylyov wrote:
> Hello.
> 
> On 09/13/2015 01:50 AM, Sergei Shtylyov wrote:
> 
> >Define the R8A7794 generic part of the USB PHY device node. It is up to the
> >board file to enable the device.
> >
> >Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
> >
> >---
> >  arch/arm/boot/dts/r8a7794.dtsi |   19 +++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> >
> >Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
> >===================================================================
> >--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
> >+++ renesas/arch/arm/boot/dts/r8a7794.dtsi
> >@@ -690,6 +690,25 @@
> >  				 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
> >  	};
> >
> >+	usbphy: usb-phy at e6590100 {
> >+		compatible = "renesas,usb-phy-r8a7794";
> >+		reg = <0 0xe6590100 0 0x100>;
> >+		#address-cells = <1>;
> >+		#size-cells = <0>;
> >+		clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
> >+		clock-names = "usbhs";
> 
>    Forgot to add "power-domains" prop here. :-(

Are you planning to repost this?