[PATCH v7 3/7] ARM: dts: imx: imx7d-sbd add usb_otg2_vbus pinctrl settings

[Adrian Alonso]

Add usb_otg2_vbus pinctrl settings

Signed-off-by: Adrian Alonso <aalonso at freescale.com>
---
Changes for V7: New patch in series

 arch/arm/boot/dts/imx7d-sdb.dts | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index a5c7a44..96c1e1a 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -77,6 +77,8 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 =  <&pinctrl_usb_otg2_vbus>;
 			enable-active-high;
 		};
 
@@ -254,11 +256,16 @@
 	imx7d-sdb {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
 				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
 			>;
 		};
 
+		pinctrl_usb_otg2_vbus: usbotg2vbusgrp {
+			fsl,pins = <
+				MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14 /* usb_otg2_pwr */
+			>;
+		};
+
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
 				MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
-- 
2.1.4