[PATCH 3/3] ARM: bcm2835: Add the auxiliary clocks to the device tree.

[Eric Anholt]

Stephen Warren <swarren at wwwdotorg.org> writes:

> On 09/10/2015 03:22 PM, Eric Anholt wrote:
>> These will be used for enabling UART1, SPI1, and SPI2.
>
>> diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
>
>> +		aux_clocks: aux-clocks at 0x7e215004 {
>> +			compatible = "brcm,bcm2835-aux-clock";
>> +			#clock-cells = <1>;
>> +			reg = <0x7e215004 0x4>;
>
> Actually, I take back the ack on this patch. This HW module has two
> registers. The reg property should include both of those registers so
> that if SW needs to start using the other register at some time in the
> future, the entire set of registers is already represented in DT.

If I changed it to "reg = <0x7e215000 0x8>" and use a #define for the
clock register offset in patch 2/3, would I then have your ack?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 818 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150928/6388a0c9/attachment.sig>