[PATCH] ARM: dts: imx7d: Fix UART2 base address

[Shawn Guo]

On Thu, Sep 24, 2015 at 04:18:12PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at freescale.com>
> 
> The UART2 memory space starts at address 0x30890000 (UART2_URXD).
> 
> Fix it so that UART2 can be used.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>

Frank, can you confirm it?

Shawn

> ---
>  arch/arm/boot/dts/imx7d.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
> index 15c2193..9569d0a 100644
> --- a/arch/arm/boot/dts/imx7d.dtsi
> +++ b/arch/arm/boot/dts/imx7d.dtsi
> @@ -640,10 +640,10 @@
>  				status = "disabled";
>  			};
>  
> -			uart2: serial at 30870000 {
> +			uart2: serial at 30890000 {
>  				compatible = "fsl,imx7d-uart",
>  					     "fsl,imx6q-uart";
> -				reg = <0x30870000 0x10000>;
> +				reg = <0x30890000 0x10000>;
>  				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
>  					<&clks IMX7D_UART2_ROOT_CLK>;
> -- 
> 1.9.1
>