[PATCH] ARM: dts: exynos4412-trats2: remove regulator-compatible usage
Javier Martinez Canillas
javier at osg.samsung.com
Fri Sep 25 06:44:17 PDT 2015
The regulator-compatible property from the regulator DT binding was
deprecated and the correct approach is to use the node's name.
This patch has no functional changes but by not using a deprecated
property, new DTS based on this one will not carry the same issue.
Signed-off-by: Javier Martinez Canillas <javier at osg.samsung.com>
---
arch/arm/boot/dts/exynos4412-trats2.dts | 105 +++++++++++---------------------
1 file changed, 35 insertions(+), 70 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 2a1ebb76ebe0..9ee55119e7d2 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -564,16 +564,14 @@
#clock-cells = <1>;
voltage-regulators {
- ldo1_reg: ldo1 {
- regulator-compatible = "LDO1";
+ ldo1_reg: LDO1 {
regulator-name = "VALIVE_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
- ldo2_reg: ldo2 {
- regulator-compatible = "LDO2";
+ ldo2_reg: LDO2 {
regulator-name = "VM1M2_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
@@ -583,32 +581,28 @@
};
};
- ldo3_reg: ldo3 {
- regulator-compatible = "LDO3";
+ ldo3_reg: LDO3 {
regulator-name = "VCC_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- ldo4_reg: ldo4 {
- regulator-compatible = "LDO4";
+ ldo4_reg: LDO4 {
regulator-name = "VCC_2.8V_AP";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
- ldo5_reg: ldo5 {
- regulator-compatible = "LDO5";
+ ldo5_reg: LDO5 {
regulator-name = "VCC_1.8V_IO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- ldo6_reg: ldo6 {
- regulator-compatible = "LDO6";
+ ldo6_reg: LDO6 {
regulator-name = "VMPLL_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
@@ -618,8 +612,7 @@
};
};
- ldo7_reg: ldo7 {
- regulator-compatible = "LDO7";
+ ldo7_reg: LDO7 {
regulator-name = "VPLL_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
@@ -629,8 +622,7 @@
};
};
- ldo8_reg: ldo8 {
- regulator-compatible = "LDO8";
+ ldo8_reg: LDO8 {
regulator-name = "VMIPI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
@@ -639,15 +631,13 @@
};
};
- ldo9_reg: ldo9 {
- regulator-compatible = "LDO9";
+ ldo9_reg: LDO9 {
regulator-name = "CAM_ISP_MIPI_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- ldo10_reg: ldo10 {
- regulator-compatible = "LDO10";
+ ldo10_reg: DO10 {
regulator-name = "VMIPI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -656,8 +646,7 @@
};
};
- ldo11_reg: ldo11 {
- regulator-compatible = "LDO11";
+ ldo11_reg: LDO11 {
regulator-name = "VABB1_1.95V";
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
@@ -667,8 +656,7 @@
};
};
- ldo12_reg: ldo12 {
- regulator-compatible = "LDO12";
+ ldo12_reg: LDO12 {
regulator-name = "VUOTG_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
@@ -677,15 +665,13 @@
};
};
- ldo13_reg: ldo13 {
- regulator-compatible = "LDO13";
+ ldo13_reg: LDO13 {
regulator-name = "NFC_AVDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo14_reg: ldo14 {
- regulator-compatible = "LDO14";
+ ldo14_reg: LDO14 {
regulator-name = "VABB2_1.95V";
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
@@ -695,8 +681,7 @@
};
};
- ldo15_reg: ldo15 {
- regulator-compatible = "LDO15";
+ ldo15_reg: LDO15 {
regulator-name = "VHSIC_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
@@ -705,8 +690,7 @@
};
};
- ldo16_reg: ldo16 {
- regulator-compatible = "LDO16";
+ ldo16_reg: LDO16 {
regulator-name = "VHSIC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -715,80 +699,69 @@
};
};
- ldo17_reg: ldo17 {
- regulator-compatible = "LDO17";
+ ldo17_reg: LDO17 {
regulator-name = "CAM_SENSOR_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- ldo18_reg: ldo18 {
- regulator-compatible = "LDO18";
+ ldo18_reg: LDO18 {
regulator-name = "CAM_ISP_SEN_IO_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo19_reg: ldo19 {
- regulator-compatible = "LDO19";
+ ldo19_reg: LDO19 {
regulator-name = "VT_CAM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo20_reg: ldo20 {
- regulator-compatible = "LDO20";
+ ldo20_reg: LDO20 {
regulator-name = "VDDQ_PRE_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo21_reg: ldo21 {
- regulator-compatible = "LDO21";
+ ldo21_reg: LDO21 {
regulator-name = "VTF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
};
- ldo22_reg: ldo22 {
- regulator-compatible = "LDO22";
+ ldo22_reg: LDO22 {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
- ldo23_reg: ldo23 {
- regulator-compatible = "LDO23";
+ ldo23_reg: LDO23 {
regulator-name = "TSP_AVDD_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo24_reg: ldo24 {
- regulator-compatible = "LDO24";
+ ldo24_reg: LDO24 {
regulator-name = "TSP_VDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo25_reg: ldo25 {
- regulator-compatible = "LDO25";
+ ldo25_reg: LDO25 {
regulator-name = "LCD_VCC_3.3V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
- ldo26_reg: ldo26 {
- regulator-compatible = "LDO26";
+ ldo26_reg: LDO26 {
regulator-name = "MOTOR_VCC_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
- buck1_reg: buck1 {
- regulator-compatible = "BUCK1";
+ buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1100000>;
@@ -799,8 +772,7 @@
};
};
- buck2_reg: buck2 {
- regulator-compatible = "BUCK2";
+ buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1500000>;
@@ -811,8 +783,7 @@
};
};
- buck3_reg: buck3 {
- regulator-compatible = "BUCK3";
+ buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
@@ -823,8 +794,7 @@
};
};
- buck4_reg: buck4 {
- regulator-compatible = "BUCK4";
+ buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
@@ -834,40 +804,35 @@
};
};
- buck5_reg: buck5 {
- regulator-compatible = "BUCK5";
+ buck5_reg: BUCK5 {
regulator-name = "VMEM_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- buck6_reg: buck6 {
- regulator-compatible = "BUCK6";
+ buck6_reg: BUCK6 {
regulator-name = "VCC_SUB_1.35V";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
- buck7_reg: buck7 {
- regulator-compatible = "BUCK7";
+ buck7_reg: BUCK7 {
regulator-name = "VCC_SUB_2.0V";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
- buck8_reg: buck8 {
- regulator-compatible = "BUCK8";
+ buck8_reg: BUCK8 {
regulator-name = "VMEM_VDDF_3.0V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
- buck9_reg: buck9 {
- regulator-compatible = "BUCK9";
+ buck9_reg: BUCK9 {
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
--
2.4.3
More information about the linux-arm-kernel
mailing list