[PATCH 3/3] PCI: generic: Add support for Cavium ThunderX PCIe root complexes.

Lorenzo Pieralisi lorenzo.pieralisi at arm.com
Tue Sep 22 09:05:49 PDT 2015


On Thu, Sep 17, 2015 at 11:41:34PM +0100, David Daney wrote:
> From: David Daney <david.daney at cavium.com>
> 
> The config space for external PCIe root complexes on some Cavium
> ThunderX SoCs is very similar to CAM and ECAM, but differs in the
> shift values that have to be applied to the bus and devfn numbers to
> compose that address window offset.  These root complexes also have
> the interesting property that there is no root bridge, so the standard
> manner of limiting scanning to only the first device doesn't work.  We
> can use the standard pci-host-generic driver if we make a minor
> addition to handle these differences, so we...
> 
> Add a mapping function for ThunderX PCIe root complexes with a bus
> shift of 24 and devfn shift of 16.  Ignore accesses for devices other
> than the first device on the primary bus.
> 
> Document the whole thing in devicetree/bindings/pci/host-generic-pci.txt
> 
> Signed-off-by: David Daney <david.daney at cavium.com>
> ---
>  .../devicetree/bindings/pci/host-generic-pci.txt   |  8 +++---
>  drivers/pci/host/pci-host-generic.c                | 29 ++++++++++++++++++++++
>  2 files changed, 34 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.txt b/Documentation/devicetree/bindings/pci/host-generic-pci.txt
> index 105a968..a5aed0f 100644
> --- a/Documentation/devicetree/bindings/pci/host-generic-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/host-generic-pci.txt
> @@ -14,9 +14,11 @@ tree bindings communicated in pci.txt:
>  
>  Properties of the host controller node:
>  
> -- compatible     : Must be "pci-host-cam-generic" or "pci-host-ecam-generic"
> -                   depending on the layout of configuration space (CAM vs
> -                   ECAM respectively).
> +- compatible     : One of the following with bus:devfn:reg mapped to the
> +                   PCI config space address window in the bit positions shown:
> +                   "pci-host-cam-generic" -- 'CAM'  bits 16:8:0
> +                   "pci-host-ecam-generic" -- 'ECAM'  bits 20:12:0
> +                   "cavium,pci-host-thunder-pem" --  bits 24:16:0

To me that's ECAM left shifted by 4. Is not it just a matter of defining
config space base address (ie reg property) differently ?

Lorenzo

>  
>  - device_type    : Must be "pci".
>  
> diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c
> index e364232..e1d8d5b 100644
> --- a/drivers/pci/host/pci-host-generic.c
> +++ b/drivers/pci/host/pci-host-generic.c
> @@ -91,6 +91,32 @@ static struct gen_pci_cfg_bus_ops gen_pci_cfg_ecam_bus_ops = {
>  	}
>  };
>  
> +static void __iomem *gen_pci_map_cfg_bus_thunder_pem(struct pci_bus *bus,
> +						     unsigned int devfn,
> +						     int where)
> +{
> +	struct gen_pci *pci = bus->sysdata;
> +	resource_size_t idx = bus->number - pci->cfg.bus_range->start;
> +
> +	/*
> +	 * Thunder PEM is a PCIe RC, but without a root bridge.  On
> +	 * the primary bus, ignore accesses for devices other than
> +	 * the first device.
> +	 */
> +	if (idx == 0 && (devfn & ~7u))
> +		return NULL;
> +	return pci->cfg.win[idx] + ((devfn << 16) | where);
> +}
> +
> +static struct gen_pci_cfg_bus_ops gen_pci_cfg_thunder_pem_bus_ops = {
> +	.bus_shift	= 24,
> +	.ops		= {
> +		.map_bus	= gen_pci_map_cfg_bus_thunder_pem,
> +		.read		= pci_generic_config_read,
> +		.write		= pci_generic_config_write,
> +	}
> +};
> +
>  static const struct of_device_id gen_pci_of_match[] = {
>  	{ .compatible = "pci-host-cam-generic",
>  	  .data = &gen_pci_cfg_cam_bus_ops },
> @@ -98,6 +124,9 @@ static const struct of_device_id gen_pci_of_match[] = {
>  	{ .compatible = "pci-host-ecam-generic",
>  	  .data = &gen_pci_cfg_ecam_bus_ops },
>  
> +	{ .compatible = "cavium,pci-host-thunder-pem",
> +	  .data = &gen_pci_cfg_thunder_pem_bus_ops },
> +
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, gen_pci_of_match);
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 



More information about the linux-arm-kernel mailing list