[PATCH 4/6] ARM: dts: sun7i: Enable USB DRC on the Orange pi

Hans de Goede hdegoede at redhat.com
Tue Sep 22 06:36:03 PDT 2015


From: Reinder de Haan <patchesrdh at mveas.com>

Add usb otg support for Orange pi, based on Orange pi mini.

Signed-off-by: Reinder de Haan <patchesrdh at mveas.com>
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 arch/arm/boot/dts/sun7i-a20-orangepi.dts | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
index 55a06ce..71125bf 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
@@ -141,7 +141,18 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
+	usb0_id_detect_pin: usb0_id_detect_pin at 0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
 	mmc0_cd_pin_orangepi: mmc0_cd_pin at 0 {
 		allwinner,pins = "PH10";
 		allwinner,function = "gpio_in";
@@ -203,6 +214,10 @@
 	regulator-name = "avcc";
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
 	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
@@ -221,7 +236,21 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
-- 
2.4.3




More information about the linux-arm-kernel mailing list