[PATCH 2/3] thermal: Add Mediatek thermal controller support
Sascha Hauer
s.hauer at pengutronix.de
Tue Sep 22 01:30:42 PDT 2015
On Tue, Sep 22, 2015 at 03:30:47PM +0800, Daniel Kurtz wrote:
> On Mon, Sep 14, 2015 at 3:32 PM, Daniel Kurtz <djkurtz at chromium.org> wrote:
> >
> > Hi Sascha,
> >
> > On Mon, Aug 31, 2015 at 3:34 PM, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> > > This adds support for the Mediatek thermal controller found on MT8173
> > > and likely other SoCs.
> > > The controller is a bit special. It does not have its own ADC, instead
> > > it controls the on-SoC AUXADC via AHB bus accesses. For this reason
> > > we need the physical address of the AUXADC. Also it controls a mux
> > > using AHB bus accesses, so we need the APMIXEDSYS physical address aswell.
> > >
> > > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > > Reviewed-by: Daniel Kurtz <djkurtz at chromium.org>
> >
> > [snip...]
> >
> > > +static int mtk_read_temp(void *data, long *temp)
> > > +{
> > > + struct mtk_thermal_bank *bank = data;
> > > +
> > > + mtk_thermal_get_bank(bank);
> > > +
> > > + *temp = mtk_thermal_bank_temperature(bank);
> > > +
> > > + mtk_thermal_put_bank(bank);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static const struct thermal_zone_of_device_ops mtk_thermal_ops = {
> > > + .get_temp = mtk_read_temp,
> >
> > On v4.3-rc1, this now causes a compile warning, since the prototype
> > for get_temp was changed to:
> >
> > int (*get_temp)(void *, int *);
> >
> > by:
> > commit 17e8351a77397e8a83727eb17e3a3e9b8ab5257a
> > thermal: consistently use int for temperatures
>
> It is actually a little worse than a warning. This actually causes a
> crash on boot.
> Sascha, can you send out a rebased patch set on v4.3-rc1?
Yes, I'll send out a new version tomorrow. I am currently quite busy
with another project.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list