[PATCH 1/3] mfd: axp20x: Rename supply names for AXP221 DC1SW and DC5LDO regulators

[Chen-Yu Tsai]

Hi Lee,

On Sun, Sep 20, 2015 at 12:17 PM, Lee Jones <lee.jones at linaro.org> wrote:
> On Wed, 16 Sep 2015, Chen-Yu Tsai wrote:
>
>> The DC1SW and DC5LDO regulators in the AXP221 are internally chained
>> to DCDC1 and DCDC5, hence the names. The original bindings used the
>> parent regulator names for the supply regulator property. This causes
>> some confusion when we actually use it in the dts:
>>
>>       axp221 {
>>               /* self supplying? */
>>               dcdc1-supply = <&dcdc1>;
>>               dcdc5-supply = <&dcdc5>;
>>
>>               dcdc1: dcdc1 {
>>                       ...
>>               };
>>
>>               dcdc5: dcdc5 {
>>                       ...
>>               };
>>       };
>>
>> Change them to the downstream regulator names, or "dc1sw" and "dc5ldo"
>> respectively.
>>
>> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
>> ---
>>  Documentation/devicetree/bindings/mfd/axp20x.txt | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> Applied, thanks.

Mark (in his reply) has a point. If these are internally connect, we
should just remove them from the bindings, and associate them in the
driver.

I'm looking into this. In the mean time, could you drop this one?

Thanks
ChenYu

>> diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
>> index 41811223e5be..8e79252b1e7c 100644
>> --- a/Documentation/devicetree/bindings/mfd/axp20x.txt
>> +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
>> @@ -60,8 +60,8 @@ DCDC2               : DC-DC buck    : vin2-supply
>>  DCDC3                : DC-DC buck    : vin3-supply
>>  DCDC4                : DC-DC buck    : vin4-supply
>>  DCDC5                : DC-DC buck    : vin5-supply
>> -DC1SW                : On/Off Switch : dcdc1-supply          : DCDC1 secondary output
>> -DC5LDO               : LDO           : dcdc5-supply          : input from DCDC5
>> +DC1SW                : On/Off Switch : dc1sw-supply          : DCDC1 secondary output
>> +DC5LDO               : LDO           : dc5ldo-supply         : input from DCDC5
>>  ALDO1                : LDO           : aldoin-supply         : shared supply
>>  ALDO2                : LDO           : aldoin-supply         : shared supply
>>  ALDO3                : LDO           : aldoin-supply         : shared supply
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog