[linux-sunxi] [PATCH 0/5] ARM: sunxi: Introduce CHIP support

[Hans de Goede]

Hi,

On 09/18/2015 04:48 AM, Maxime Ripard wrote:
> Hi,
>
> Here is a serie introducing the support for the Allwinner R8 and the
> Nextthing's CHIP.
>
> Support is almost complete for the CHIP itself, the only missing part
> for now is the WiFi chip that needs to be powered through two combined
> regulators (AXP209's LDO3 and LDO4). The audio codec is also missing
> since it's not already enabled in the DT.
>
> Both these features will be addressed eventually.
>
> Let me know what you think,

Assuming you will be fixing Chen-Yu's comments this series looks good
to me and is:

Reviewed-by: Hans de Goede <hdegoede at redhat.com>

Regards,

Hans



> Maxime
>
> Maxime Ripard (5):
>    ARM: sunxi: Add R8 support
>    ARM: sun5i: Add R8 DTSI
>    ARM: sun5i: dt: Move uart3 pinctrl node to common DTSI
>    ARM: sun5i: dt: Add UART3 CTS and RTS pins
>    ARM: sun5i: Add C.H.I.P DTS
>
>   arch/arm/boot/dts/Makefile          |   3 +-
>   arch/arm/boot/dts/sun5i-a10s.dtsi   |   7 -
>   arch/arm/boot/dts/sun5i-r8-chip.dts | 261 ++++++++++++++++++++++++++++++++++++
>   arch/arm/boot/dts/sun5i-r8.dtsi     |  61 +++++++++
>   arch/arm/boot/dts/sun5i.dtsi        |  14 ++
>   arch/arm/mach-sunxi/sunxi.c         |   3 +-
>   drivers/clk/sunxi/clk-sunxi.c       |   1 +
>   7 files changed, 341 insertions(+), 9 deletions(-)
>   create mode 100644 arch/arm/boot/dts/sun5i-r8-chip.dts
>   create mode 100644 arch/arm/boot/dts/sun5i-r8.dtsi
>