[PATCH] usb: gadget: atmel_usba_udc: add ep capabilities support on device tree binding

[Nicolas Ferre]

From: Sylvain Rochet <sylvain.rochet at finsecur.com>

The recently added endpoint capabilities flags verification breaks Atmel
USBA because the endpoint configuration was only added when the driver
is bound using the legacy pdata interface.

Convert endpoint configuration to new capabilities model when driver is
bound to a device tree as well.

Signed-off-by: Sylvain Rochet <sylvain.rochet at finsecur.com>
Fixes: 47bef3865115 ("usb: gadget: atmel_usba_udc: add ep capabilities support")
Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
Felipe,

As you've just requested, here is the same patch sent to linux-usb ml. I had
added the "Fixes" and my SoB tags.

For the record:
It is considered as a fix for 4.3. Can you please queue it for the "4.3-rc"
phase?

Bye,


 drivers/usb/gadget/udc/atmel_usba_udc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 3dfada8d6061..f0f2b066ac08 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -2002,6 +2002,17 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
 		ep->udc = udc;
 		INIT_LIST_HEAD(&ep->queue);
 
+		if (ep->index == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = ep->can_isoc;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+
 		if (i)
 			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
 
-- 
2.1.3