[PATCH v3 00/26] ARM: pxa: magician: Rework HTC Magician support

[Petr Cvek]

Dne 17.9.2015 v 06:53 Petr Cvek napsal(a):
> This patchset will clean, fix, optimize and add multiple devices,
> which can be found on the HTC Magician machine.
> 
> Platform data for the pasic3-leds driver has been removed, as this
> driver do not exist in the vanilla. And it is expected to be recreated
> in the future with an incompatible platform data structure.
> 
> Default setting of the Samsung LCD pixel clock period has been
> increased, so resulting frequency is 50Hz (original 117Hz). Period
> can be possibly incresed even more. At this moment there is no video
> player with IWMMXT support and software only versions cannot make it
> to 30fps. Frequency decreasing has a good impact to memory troughtput
> as LCD controller does not do as many memory bursts as at original
> speed. This was verified with the lat_mem_rd from the lmbench3.
> 
> The Omnivision OV9640 camera has a problem with running on 400kHz
> of the I2C clock. It seems it freezes the bus until PXA I2C driver
> reload. Datasheet says it OK on 400kHz though. There may be some
> compatibility bug in the PXA I2C driver as Omnivision cameras often
> uses special I2C protocol (SCCB).
> 
> Using the CPU frequency scaling (with help of an MAX1587A regulator)
> sometimes causes an SoC failure. It is probably related to the PXA27x
> erratum E37, E36, E80 or E89. Infreqent changes mostly works.
> 
> STUART removal is a prepare for:
> 
> 	net: irda: pxaficp_ir: dmaengine conversion
> 
> Function was tested on the board_id 0x3a version (specifically on
> the T-Mobile MDA compact).
> 
> Petr Cvek (26):
>   ARM: pxa: magician: Fix indentation in machine files
>   ARM: pxa: magician: Change comments to be more informative
>   ARM: pxa: magician: Print more specific error message for global
>     GPIOs
>   ARM: pxa: magician: Optimize debug messages for LCD power
>   ARM: pxa: magician: Change description of LCD power GPIO
>   ARM: pxa: magician: Add new discovered EGPIO pins
>   ARM: pxa: magician: Fix HTC Magician pin mux definitions
>   ARM: pxa: magician: Rename abstract LCD GPIOs
>   ARM: pxa: magician: Optimize powerup delays for Samsung LCD
>   ARM: pxa: magician: Optimize Samsung LCD refresh to 50Hz
>   ARM: pxa: magician: Optimize EGPIO initial values
>   ARM: pxa: magician: Rename charger cable detection EGPIOs
>   ARM: pxa: magician: Fix and add charging detection functions
>   ARM: pxa: magician: Fix platform data for both PXA27x I2C controllers
>   ARM: pxa: magician: Fix redundant GPIO request for pxaficp_ir
>   ARM: pxa: magician: Fix support for Intel Strata NOR Flash
>   ARM: pxa: magician: Fix wrongly enabled USB host ports
>   ARM: pxa: magician: Add support for ADS7846
>   ARM: pxa: magician: Add support for Omnivision OV9640 camera
>   ARM: pxa: magician: Add support for MAX1587A Vcore regulator
>   ARM: pxa: magician: Add support for PXA27x UDC
>   ARM: pxa: magician: Remove pdata for pasic3-leds
>   ARM: pxa: magician: Remove definition of the STUART port
>   ARM: pxa: magician: Add debug message for backlight brightness
>     function
>   ARM: pxa: magician: Add missing regulator for PWM backlight
>   ARM: pxa: magician: Move platform_add_devices() to the end of
>     magician_init()
> 
>  arch/arm/mach-pxa/include/mach/magician.h |  78 +--
>  arch/arm/mach-pxa/magician.c              | 907 +++++++++++++++++++++---------
>  2 files changed, 682 insertions(+), 303 deletions(-)
> 

I am sorry, if you got some of the mails twice. It seems there was a combination of bad timing and filling of my email box (some emails was sent OK, some seemed to be sent OK, but not and some was not sent at all). And I had list of mails from the patchset version 2, MFD/LEDs subsystem relevant patch is only:

	ARM: pxa: magician: Remove pdata for pasic3-leds

On the other hand if you got only a part of the patchset and you want to see missing parts, mail me and I will send you.

Best regards,
Petr Cvek