[PATCH 11/19] ARM: shmobile: silk: add VIN0/ADV7180 DT support

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>

Define  the  SILK board dependent part of the  VIN0  device  node.
Add the device node for Analog Devices ADV7180 video decoder to I2C1 bus.
Add the necessary subnodes to interconnect VIN0 and ADV7180 devices.

Based on the Henninger VIN0/ADV8170 device tree patch by myself.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7794-silk.dts | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 3f808724106e..bb0a22423dc4 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -75,6 +75,11 @@
 		renesas,groups = "qspi_ctrl", "qspi_data4";
 		renesas,function = "qspi";
 	};
+
+	vin0_pins: vin0 {
+		renesas,groups = "vin0_data8", "vin0_clk";
+		renesas,function = "vin0";
+	};
 };
 
 &scif2 {
@@ -106,6 +111,19 @@
 
 	status = "okay";
 	clock-frequency = <400000>;
+
+	composite-in at 20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
 };
 
 &mmcif0 {
@@ -153,3 +171,20 @@
 		};
 	};
 };
+
+/* composite video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
-- 
2.1.4