[PATCH v4 1/3] leds: netxbig: add device tree binding
Simon Guinot
simon.guinot at sequanux.org
Thu Sep 17 08:59:29 PDT 2015
This patch adds device tree support for the netxbig LEDs.
This also introduces a additionnal DT binding for the GPIO extension bus
(netxbig-gpio-ext) used to configure the LEDs. Since this bus could also
be used to control other devices, then it seems more suitable to have it
in a separate DT binding.
Signed-off-by: Simon Guinot <simon.guinot at sequanux.org>
Acked-by: Linus Walleij <linus.walleij at linaro.org>
---
.../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
.../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
drivers/leds/leds-netxbig.c | 258 +++++++++++++++++++--
include/dt-bindings/leds/leds-netxbig.h | 18 ++
4 files changed, 369 insertions(+), 21 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
create mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
create mode 100644 include/dt-bindings/leds/leds-netxbig.h
Changes for v2:
- Check timer mode value retrieved from DT.
- In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
timer delay values from DT with function of_property_read_u32_index.
Instead, use a temporary u32 variable. This allows to silence a static
checker warning.
- Make timer property optional in the binding documentation. It is now
aligned with the driver code.
Changes for v3:
- Fix pointer usage with the temporary u32 variable while calling
of_property_read_u32_index.
Changes for v4:
- In DT binding document netxbig-gpio-ext.txt, detail byte order for
registers and latch mechanism for "enable-gpio".
- In leds-netxbig.c, add some error messages.
- In leds-netxbig.c, fix some "sizeof" style issues.
- In leds-netxbig.c, in netxbig_leds_get_of_pdata(), move the
of_property_read_string() calls after the error-prone checks.
- Add some Acked-by.
diff --git a/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt b/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
new file mode 100644
index 000000000000..50ec2e690701
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
@@ -0,0 +1,22 @@
+Binding for the GPIO extension bus found on some LaCie/Seagate boards
+(Example: 2Big/5Big Network v2, 2Big NAS).
+
+Required properties:
+- compatible: "lacie,netxbig-gpio-ext".
+- addr-gpios: GPIOs representing the address register (LSB -> MSB).
+- data-gpios: GPIOs representing the data register (LSB -> MSB).
+- enable-gpio: latches the new configuration (address, data) on raising edge.
+
+Example:
+
+netxbig_gpio_ext: netxbig-gpio-ext {
+ compatible = "lacie,netxbig-gpio-ext";
+
+ addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+ &gpio1 16 GPIO_ACTIVE_HIGH
+ &gpio1 17 GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH
+ &gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-netxbig.txt b/Documentation/devicetree/bindings/leds/leds-netxbig.txt
new file mode 100644
index 000000000000..efadbecbfeb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-netxbig.txt
@@ -0,0 +1,92 @@
+Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
+boards (Example: 2Big/5Big Network v2, 2Big NAS).
+
+Required properties:
+- compatible: "lacie,netxbig-leds".
+- gpio-ext: Phandle for the gpio-ext bus.
+
+Optional properties:
+- timers: Timer array. Each timer entry is represented by three integers:
+ Mode (gpio-ext bus), delay_on and delay_off.
+
+Each LED is represented as a sub-node of the netxbig-leds device.
+
+Required sub-node properties:
+- mode-addr: Mode register address on gpio-ext bus.
+- mode-val: Mode to value mapping. Each entry is represented by two integers:
+ A mode and the corresponding value on the gpio-ext bus.
+- bright-addr: Brightness register address on gpio-ext bus.
+- bright-max: Maximum brightness value.
+
+Optional sub-node properties:
+- label: Name for this LED. If omitted, the label is taken from the node name.
+- linux,default-trigger: Trigger assigned to the LED.
+
+Example:
+
+netxbig-leds {
+ compatible = "lacie,netxbig-leds";
+
+ gpio-ext = &gpio_ext;
+
+ timers = <NETXBIG_LED_TIMER1 500 500
+ NETXBIG_LED_TIMER2 500 1000>;
+
+ blue-power {
+ label = "netxbig:blue:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 1
+ NETXBIG_LED_TIMER1 3
+ NETXBIG_LED_TIMER2 7>;
+ bright-addr = <1>;
+ bright-max = <7>;
+ };
+ red-power {
+ label = "netxbig:red:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <1>;
+ bright-max = <7>;
+ };
+ blue-sata0 {
+ label = "netxbig:blue:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata0 {
+ label = "netxbig:red:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata1 {
+ label = "netxbig:blue:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata1 {
+ label = "netxbig:red:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+};
diff --git a/drivers/leds/leds-netxbig.c b/drivers/leds/leds-netxbig.c
index 25e419752a7b..dcd8302cccaf 100644
--- a/drivers/leds/leds-netxbig.c
+++ b/drivers/leds/leds-netxbig.c
@@ -26,6 +26,7 @@
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/leds.h>
#include <linux/platform_data/leds-kirkwood-netxbig.h>
@@ -140,6 +141,11 @@ struct netxbig_led_data {
spinlock_t lock;
};
+struct netxbig_led_priv {
+ struct netxbig_led_platform_data *pdata;
+ struct netxbig_led_data leds_data[];
+};
+
static int netxbig_led_get_timer_mode(enum netxbig_led_mode *mode,
unsigned long delay_on,
unsigned long delay_off,
@@ -304,12 +310,12 @@ static void delete_netxbig_led(struct netxbig_led_data *led_dat)
led_classdev_unregister(&led_dat->cdev);
}
-static int
-create_netxbig_led(struct platform_device *pdev,
- struct netxbig_led_data *led_dat,
- const struct netxbig_led *template)
+static int create_netxbig_led(struct platform_device *pdev, int led,
+ struct netxbig_led_priv *priv)
{
- struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct netxbig_led_platform_data *pdata = priv->pdata;
+ struct netxbig_led_data *led_dat = &priv->leds_data[led];
+ const struct netxbig_led *template = &priv->pdata->leds[led];
spin_lock_init(&led_dat->lock);
led_dat->gpio_ext = pdata->gpio_ext;
@@ -346,38 +352,249 @@ create_netxbig_led(struct platform_device *pdev,
return led_classdev_register(&pdev->dev, &led_dat->cdev);
}
+#ifdef CONFIG_OF_GPIO
+static int gpio_ext_get_of_pdata(struct device *dev, struct device_node *np,
+ struct netxbig_gpio_ext *gpio_ext)
+{
+ int *addr, *data;
+ int num_addr, num_data;
+ int ret;
+ int i;
+
+ ret = of_gpio_named_count(np, "addr-gpios");
+ if (ret < 0) {
+ dev_err(dev,
+ "Failed to count GPIOs in DT property addr-gpios\n");
+ return ret;
+ }
+ num_addr = ret;
+ addr = devm_kzalloc(dev, num_addr * sizeof(*addr), GFP_KERNEL);
+ if (!addr)
+ return -ENOMEM;
+
+ for (i = 0; i < num_addr; i++) {
+ ret = of_get_named_gpio(np, "addr-gpios", i);
+ if (ret < 0)
+ return ret;
+ addr[i] = ret;
+ }
+ gpio_ext->addr = addr;
+ gpio_ext->num_addr = num_addr;
+
+ ret = of_gpio_named_count(np, "data-gpios");
+ if (ret < 0) {
+ dev_err(dev,
+ "Failed to count GPIOs in DT property data-gpios\n");
+ return ret;
+ }
+ num_data = ret;
+ data = devm_kzalloc(dev, num_data * sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ for (i = 0; i < num_data; i++) {
+ ret = of_get_named_gpio(np, "data-gpios", i);
+ if (ret < 0)
+ return ret;
+ data[i] = ret;
+ }
+ gpio_ext->data = data;
+ gpio_ext->num_data = num_data;
+
+ ret = of_get_named_gpio(np, "enable-gpio", 0);
+ if (ret < 0) {
+ dev_err(dev,
+ "Failed to get GPIO from DT property enable-gpio\n");
+ return ret;
+ }
+ gpio_ext->enable = ret;
+
+ return 0;
+}
+
+static int netxbig_leds_get_of_pdata(struct device *dev,
+ struct netxbig_led_platform_data *pdata)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *gpio_ext_np;
+ struct device_node *child;
+ struct netxbig_gpio_ext *gpio_ext;
+ struct netxbig_led_timer *timers;
+ struct netxbig_led *leds, *led;
+ int num_timers;
+ int num_leds = 0;
+ int ret;
+ int i;
+
+ /* GPIO extension */
+ gpio_ext_np = of_parse_phandle(np, "gpio-ext", 0);
+ if (!gpio_ext_np) {
+ dev_err(dev, "Failed to get DT handle gpio-ext\n");
+ return -EINVAL;
+ }
+
+ gpio_ext = devm_kzalloc(dev, sizeof(*gpio_ext), GFP_KERNEL);
+ if (!gpio_ext)
+ return -ENOMEM;
+ ret = gpio_ext_get_of_pdata(dev, gpio_ext_np, gpio_ext);
+ if (ret)
+ return ret;
+ of_node_put(gpio_ext_np);
+ pdata->gpio_ext = gpio_ext;
+
+ /* Timers (optional) */
+ ret = of_property_count_u32_elems(np, "timers");
+ if (ret > 0) {
+ if (ret % 3)
+ return -EINVAL;
+ num_timers = ret / 3;
+ timers = devm_kzalloc(dev, num_timers * sizeof(*timers),
+ GFP_KERNEL);
+ if (!timers)
+ return -ENOMEM;
+ for (i = 0; i < num_timers; i++) {
+ u32 tmp;
+
+ of_property_read_u32_index(np, "timers", 3 * i,
+ &timers[i].mode);
+ if (timers[i].mode >= NETXBIG_LED_MODE_NUM)
+ return -EINVAL;
+ of_property_read_u32_index(np, "timers",
+ 3 * i + 1, &tmp);
+ timers[i].delay_on = tmp;
+ of_property_read_u32_index(np, "timers",
+ 3 * i + 2, &tmp);
+ timers[i].delay_off = tmp;
+ }
+ pdata->timer = timers;
+ pdata->num_timer = num_timers;
+ }
+
+ /* LEDs */
+ num_leds = of_get_child_count(np);
+ if (!num_leds) {
+ dev_err(dev, "No LED subnodes found in DT\n");
+ return -ENODEV;
+ }
+
+ leds = devm_kzalloc(dev, num_leds * sizeof(*leds), GFP_KERNEL);
+ if (!leds)
+ return -ENOMEM;
+
+ led = leds;
+ for_each_child_of_node(np, child) {
+ const char *string;
+ int *mode_val;
+ int num_modes;
+
+ if (of_property_read_u32(child, "mode-addr",
+ &led->mode_addr))
+ return -EINVAL;
+
+ if (of_property_read_u32(child, "bright-addr",
+ &led->bright_addr))
+ return -EINVAL;
+
+ mode_val =
+ devm_kzalloc(dev,
+ NETXBIG_LED_MODE_NUM * sizeof(*mode_val),
+ GFP_KERNEL);
+ if (!mode_val)
+ return -ENOMEM;
+
+ for (i = 0; i < NETXBIG_LED_MODE_NUM; i++)
+ mode_val[i] = NETXBIG_LED_INVALID_MODE;
+
+ ret = of_property_count_u32_elems(child, "mode-val");
+ if (ret < 0 || ret % 2)
+ return -EINVAL;
+ num_modes = ret / 2;
+ if (num_modes > NETXBIG_LED_MODE_NUM)
+ return -EINVAL;
+
+ for (i = 0; i < num_modes; i++) {
+ int mode;
+ int val;
+
+ of_property_read_u32_index(child,
+ "mode-val", 2 * i, &mode);
+ of_property_read_u32_index(child,
+ "mode-val", 2 * i + 1, &val);
+ if (mode >= NETXBIG_LED_MODE_NUM)
+ return -EINVAL;
+ mode_val[mode] = val;
+ }
+ led->mode_val = mode_val;
+
+ if (!of_property_read_string(child, "label", &string))
+ led->name = string;
+ else
+ led->name = child->name;
+
+ if (!of_property_read_string(child,
+ "linux,default-trigger", &string))
+ led->default_trigger = string;
+
+ led++;
+ }
+
+ pdata->leds = leds;
+ pdata->num_leds = num_leds;
+
+ return 0;
+}
+
+static const struct of_device_id of_netxbig_leds_match[] = {
+ { .compatible = "lacie,netxbig-leds", },
+ {},
+};
+#else
+static int netxbig_leds_get_of_pdata(struct device *dev,
+ struct netxbig_led_platform_data *pdata)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_OF_GPIO */
+
static int netxbig_led_probe(struct platform_device *pdev)
{
struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct netxbig_led_data *leds_data;
+ struct netxbig_led_priv *priv;
int i;
int ret;
- if (!pdata)
- return -EINVAL;
+ if (!pdata) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+ ret = netxbig_leds_get_of_pdata(&pdev->dev, pdata);
+ if (ret)
+ return ret;
+ }
- leds_data = devm_kzalloc(&pdev->dev,
- sizeof(struct netxbig_led_data) * pdata->num_leds, GFP_KERNEL);
- if (!leds_data)
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv) +
+ pdata->num_leds * sizeof(struct netxbig_led_data),
+ GFP_KERNEL);
+ if (!priv)
return -ENOMEM;
+ priv->pdata = pdata;
ret = gpio_ext_init(pdata->gpio_ext);
if (ret < 0)
return ret;
for (i = 0; i < pdata->num_leds; i++) {
- ret = create_netxbig_led(pdev, &leds_data[i], &pdata->leds[i]);
+ ret = create_netxbig_led(pdev, i, priv);
if (ret < 0)
goto err_free_leds;
}
-
- platform_set_drvdata(pdev, leds_data);
+ platform_set_drvdata(pdev, priv);
return 0;
err_free_leds:
for (i = i - 1; i >= 0; i--)
- delete_netxbig_led(&leds_data[i]);
+ delete_netxbig_led(&priv->leds_data[i]);
gpio_ext_free(pdata->gpio_ext);
return ret;
@@ -385,14 +602,12 @@ err_free_leds:
static int netxbig_led_remove(struct platform_device *pdev)
{
- struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct netxbig_led_data *leds_data;
+ struct netxbig_led_priv *priv = platform_get_drvdata(pdev);
+ struct netxbig_led_platform_data *pdata = priv->pdata;
int i;
- leds_data = platform_get_drvdata(pdev);
-
for (i = 0; i < pdata->num_leds; i++)
- delete_netxbig_led(&leds_data[i]);
+ delete_netxbig_led(&priv->leds_data[i]);
gpio_ext_free(pdata->gpio_ext);
@@ -403,7 +618,8 @@ static struct platform_driver netxbig_led_driver = {
.probe = netxbig_led_probe,
.remove = netxbig_led_remove,
.driver = {
- .name = "leds-netxbig",
+ .name = "leds-netxbig",
+ .of_match_table = of_match_ptr(of_netxbig_leds_match),
},
};
diff --git a/include/dt-bindings/leds/leds-netxbig.h b/include/dt-bindings/leds/leds-netxbig.h
new file mode 100644
index 000000000000..92658b0310b2
--- /dev/null
+++ b/include/dt-bindings/leds/leds-netxbig.h
@@ -0,0 +1,18 @@
+/*
+ * This header provides constants for netxbig LED bindings.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _DT_BINDINGS_LEDS_NETXBIG_H
+#define _DT_BINDINGS_LEDS_NETXBIG_H
+
+#define NETXBIG_LED_OFF 0
+#define NETXBIG_LED_ON 1
+#define NETXBIG_LED_SATA 2
+#define NETXBIG_LED_TIMER1 3
+#define NETXBIG_LED_TIMER2 4
+
+#endif /* _DT_BINDINGS_LEDS_NETXBIG_H */
--
2.1.4
More information about the linux-arm-kernel
mailing list