[PATCH RESEND] ARM: dts: Move display-timings node from fimd to dp

Tomeu Vizoso tomeu.vizoso at collabora.com
Thu Sep 17 05:48:39 PDT 2015


From: Sean Paul <seanpaul at chromium.org>

This patch moves the display-timings node from fimd to dp to reflect the
device tree bindings change.

Signed-off-by: Sean Paul <seanpaul at chromium.org>
[tomeu.vizoso at collabora.com: Rebased]
Signed-off-by: Tomeu Vizoso <tomeu.vizoso at collabora.com>

---

Hi,

looks like a long time ago the bindings were changed and the DTs for
these boards weren't updated.

I have retaken Sean's forgotten patch and rebased it, but I have only
tested on an Arndale that exynos-drm doesn't complain about missing
timings.

Regards,

Tomeu
---
 arch/arm/boot/dts/exynos5250-arndale.dts  |  8 ++++----
 arch/arm/boot/dts/exynos5250-smdk5250.dts | 16 ++++++++--------
 arch/arm/boot/dts/exynos5420-smdk5420.dts |  7 ++++---
 3 files changed, 16 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index db3f65f3eb45..c000532c1444 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -129,10 +129,6 @@
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <4>;
-};
-
-&fimd {
-	status = "okay";
 
 	display-timings {
 		native-mode = <&timing0>;
@@ -152,6 +148,10 @@
 	};
 };
 
+&fimd {
+	status = "okay";
+};
+
 &hdmi {
 	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
 	vdd_osc-supply = <&ldo10_reg>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index c625e71217aa..0f5dcd418af8 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -89,14 +89,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd>;
 	status = "okay";
-};
-
-&ehci {
-	samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
-	status = "okay";
 
 	display-timings {
 		native-mode = <&timing0>;
@@ -116,6 +108,14 @@
 	};
 };
 
+&ehci {
+	samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+};
+
 &hdmi {
 	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 98871f972c8a..7520d52f4e22 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -98,10 +98,7 @@
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <4>;
 	status = "okay";
-};
 
-&fimd {
-	status = "okay";
 	display-timings {
 		native-mode = <&timing0>;
 		timing0: timing at 0 {
@@ -118,6 +115,10 @@
 	};
 };
 
+&fimd {
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
 	hpd-gpio = <&gpx3 7 0>;
-- 
2.4.3




More information about the linux-arm-kernel mailing list