[PATCH v3 0/6] ARM: berlin: add cpufreq support

[Antoine Tenart]

Hi,

This series adds the cpufreq support to the Berlin SoCs, using
cpufreq-dt.

First, the cpuclk clock is added to the BG2Q clock driver. This clock
has a divider fixed to 1, so we use a fixed factor clock here.

Then register a platform device for cpufreq-dt.

I also added the OPP table definition in the BG2Q, BG2 and BG2CD device
trees. When using a BG2Q, some bootloaders may update this table when
booting (mine doesn't).

Tested on a BG2Q DMP.

Thanks,

Antoine

Changes since v2:
	- rebased on top of v4.3-rc1

Changes since v1:
        - added the BG2 and BG2CD support
        - moved MAX_CLKS out of the Berlin clk driver
        - reordered the patches

Antoine Tenart (6):
  clk: berlin: move MAX_CLKS out of drivers/clk/berlin
  clk: berlin: add cpuclk
  ARM: berlin: dts: add the cpufreq-dt bindings on the BG2Q
  ARM: berlin: dts: add the cpufreq-dt bindings on the BG2
  ARM: berlin: dts: add the cpufreq-dt bindings on the BG2CD
  ARM: berlin: register cpufreq-dt

 arch/arm/boot/dts/berlin2.dtsi       | 10 ++++++++++
 arch/arm/boot/dts/berlin2cd.dtsi     |  8 ++++++++
 arch/arm/boot/dts/berlin2q.dtsi      | 11 +++++++++++
 arch/arm/mach-berlin/berlin.c        |  6 ++++++
 drivers/clk/berlin/bg2.c             |  1 -
 drivers/clk/berlin/bg2q.c            | 13 ++++++-------
 include/dt-bindings/clock/berlin2.h  |  2 ++
 include/dt-bindings/clock/berlin2q.h |  3 +++
 8 files changed, 46 insertions(+), 8 deletions(-)

-- 
2.5.2