[PATCH 2/3] mtd: mtk-nor: mtk serial flash controller driver

bayi.cheng bayi.cheng at mediatek.com
Tue Sep 15 09:23:14 PDT 2015


On Wed, 2015-09-09 at 08:37 +0200, Sascha Hauer wrote:
> On Tue, Sep 08, 2015 at 05:49:55PM +0800, Bayi Cheng wrote:
> > add spi nor flash driver for mediatek controller
> > 
> > Signed-off-by: Bayi Cheng <bayi.cheng at mediatek.com>
> > ---
> >  drivers/mtd/spi-nor/Kconfig   |   7 +
> >  drivers/mtd/spi-nor/Makefile  |   1 +
> >  drivers/mtd/spi-nor/mtk_nor.c | 533 ++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 541 insertions(+)
> >  create mode 100644 drivers/mtd/spi-nor/mtk_nor.c
> > 
> > diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
> > index 89bf4c1..f433890 100644
> > --- a/drivers/mtd/spi-nor/Kconfig
> > +++ b/drivers/mtd/spi-nor/Kconfig
> > @@ -7,6 +7,13 @@ menuconfig MTD_SPI_NOR
> >  
> >  if MTD_SPI_NOR
> >  
> > +config MTD_MT81xx_NOR
> > +	tristate "Support SPI flash Controller MTD_MT81xx_NOR"
> > +	help
> > +	  This enables access to SPI Nor flash, using MTD_MT81XX_NOR controller.
> > +	  This controller does nor support generic SPI BUS, It only supports
> > +	  SPI NOR Flash.
> > +
> >  config MTD_SPI_NOR_USE_4K_SECTORS
> >  	bool "Use small 4096 B erase sectors"
> >  	default y
> > diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
> > index e53333e..2f4fe62 100644
> > --- a/drivers/mtd/spi-nor/Makefile
> > +++ b/drivers/mtd/spi-nor/Makefile
> > @@ -1,3 +1,4 @@
> > +obj-$(CONFIG_MTD_MT81xx_NOR)	+= mtk_nor.o
> >  obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
> >  obj-$(CONFIG_SPI_FSL_QUADSPI)	+= fsl-quadspi.o
> >  obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
> > diff --git a/drivers/mtd/spi-nor/mtk_nor.c b/drivers/mtd/spi-nor/mtk_nor.c
> > new file mode 100644
> > index 0000000..e675fb6
> > --- /dev/null
> > +++ b/drivers/mtd/spi-nor/mtk_nor.c
> > @@ -0,0 +1,533 @@
> > +/*
> > + * Copyright (c) 2015 MediaTek Inc.
> > + * Author: Bayi.Cheng <bayi.cheng at mediatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/init.h>
> > +#include <linux/io.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/ioport.h>
> > +#include <linux/math64.h>
> > +#include <linux/module.h>
> > +#include <linux/mtd/mtd.h>
> > +#include <linux/mutex.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_gpio.h>
> > +#include <linux/pinctrl/consumer.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +#include <linux/mtd/mtd.h>
> > +#include <linux/mtd/partitions.h>
> > +#include <linux/mtd/spi-nor.h>
> > +
> > +#define MTK_NOR_CMD_REG			0x00
> > +#define MTK_NOR_CNT_REG			0x04
> > +#define MTK_NOR_RDSR_REG		0x08
> > +#define MTK_NOR_RDATA_REG		0x0c
> > +#define MTK_NOR_RADR0_REG		0x10
> > +#define MTK_NOR_RADR1_REG		0x14
> > +#define MTK_NOR_RADR2_REG		0x18
> > +#define MTK_NOR_WDATA_REG		0x1c
> > +#define MTK_NOR_PRGDATA0_REG		0x20
> > +#define MTK_NOR_PRGDATA1_REG		0x24
> > +#define MTK_NOR_PRGDATA2_REG		0x28
> > +#define MTK_NOR_PRGDATA3_REG		0x2c
> > +#define MTK_NOR_PRGDATA4_REG		0x30
> > +#define MTK_NOR_PRGDATA5_REG		0x34
> > +#define MTK_NOR_SHREG0_REG		0x38
> > +#define MTK_NOR_SHREG1_REG		0x3c
> > +#define MTK_NOR_SHREG2_REG		0x40
> > +#define MTK_NOR_SHREG3_REG		0x44
> > +#define MTK_NOR_SHREG4_REG		0x48
> > +#define MTK_NOR_SHREG5_REG		0x4c
> > +#define MTK_NOR_SHREG6_REG		0x50
> > +#define MTK_NOR_SHREG7_REG		0x54
> > +#define MTK_NOR_SHREG8_REG		0x58
> > +#define MTK_NOR_SHREG9_REG		0x5c
> > +#define MTK_NOR_FLHCFG_REG		0x84
> > +#define MTK_NOR_PP_DATA_REG		0x98
> > +#define MTK_NOR_PREBUF_STUS_REG		0x9c
> > +#define MTK_NOR_INTRSTUS_REG		0xa8
> > +#define MTK_NOR_INTREN_REG		0xac
> > +#define MTK_NOR_TIME_REG		0x94
> > +#define MTK_NOR_CHKSUM_CTL_REG		0xb8
> > +#define MTK_NOR_CHKSUM_REG		0xbc
> > +#define MTK_NOR_CMD2_REG		0xc0
> > +#define MTK_NOR_WRPROT_REG		0xc4
> > +#define MTK_NOR_RADR3_REG		0xc8
> > +#define MTK_NOR_DUAL_REG		0xcc
> > +#define MTK_NOR_DELSEL0_REG		0xa0
> > +#define MTK_NOR_DELSEL1_REG		0xa4
> > +#define MTK_NOR_DELSEL2_REG		0xd0
> > +#define MTK_NOR_DELSEL3_REG		0xd4
> > +#define MTK_NOR_DELSEL4_REG		0xd8
> > +#define MTK_NOR_CFG1_REG		0x60
> > +#define MTK_NOR_CFG2_REG		0x64
> > +#define MTK_NOR_CFG3_REG		0x68
> > +#define MTK_NOR_STATUS0_REG		0x70
> > +#define MTK_NOR_STATUS1_REG		0x74
> > +#define MTK_NOR_STATUS2_REG		0x78
> > +#define MTK_NOR_STATUS3_REG		0x7c
> > +/* commands for mtk nor controller */
> > +#define MTK_NOR_READ_CMD		0x0
> > +#define MTK_NOR_RDSR_CMD		0x2
> > +#define MTK_NOR_PRG_CMD			0x4
> > +#define MTK_NOR_WR_CMD			0x10
> > +#define MTK_NOR_WRSR_CMD		0x20
> > +#define MTK_NOR_PIO_READ_CMD		0x81
> > +#define MTK_NOR_WR_BUF_ENABLE		0x1
> > +#define MTK_NOR_WR_BUF_DISABLE		0x0
> > +#define MTK_NOR_ENABLE_SF_CMD		0x30
> > +#define MTK_NOR_DUAD_ADDR_EN		0x8
> > +#define MTK_NOR_QUAD_READ_EN		0x4
> > +#define MTK_NOR_DUAL_ADDR_EN		0x2
> > +#define MTK_NOR_DUAL_READ_EN		0x1
> > +#define MTK_NOR_DUAL_DISABLE		0x0
> > +#define MTK_NOR_FAST_READ		0x1
> > +
> > +#define SFLASH_WRBUF_SIZE		128
> > +#define MAX_FLASHCOUNT			1
> > +#define SFLASHHWNAME_LEN		12
> > +#define SFLASH_MAX_DMA_SIZE		(1024 * 8)
> > +
> > +#define LoWord(d)		((u16)(d & 0x0000ffffL))
> > +#define HiWord(d)		((u16)((d >> 16) & 0x0000ffffL))
> > +#define LoByte(w)		((u8)(w & 0x00ff))
> > +#define HiByte(w)		((u8)(((w) >> 8) & 0x00ff))
> 
> NoCamelCasePlease
OK, I will fix it. and sorry for later reply !
> 
> > +#define LOCAL_BUF_SIZE		(SFLASH_MAX_DMA_SIZE * 20)
> > +
> > +struct mt8173_nor {
> > +	struct mtd_info mtd;
> > +	struct spi_nor nor;
> > +	struct device *dev;
> > +	void __iomem *base;	/* nor flash base address */
> > +	struct clk *spi_clk;
> > +	struct clk *src_axi_clk;
> > +	struct clk *sf_mux_clk;
> > +	struct clk *nor_clk;
> > +};
> > +
> > +static void mt8173_nor_set_read_mode(struct mt8173_nor *mt8173_nor)
> > +{
> > +	struct spi_nor *nor = &mt8173_nor->nor;
> > +
> > +	switch (nor->flash_read) {
> > +	case SPI_NOR_FAST:
> > +		writeb(SPINOR_OP_READ_FAST, mt8173_nor->base +
> > +		       MTK_NOR_PRGDATA3_REG);
> > +		writeb(MTK_NOR_FAST_READ, mt8173_nor->base +
> > +		       MTK_NOR_CFG1_REG);
> > +		break;
> > +	case SPI_NOR_DUAL:
> > +		writeb(SPINOR_OP_READ_1_1_2, mt8173_nor->base +
> > +		       MTK_NOR_PRGDATA3_REG);
> > +		writeb(MTK_NOR_DUAL_READ_EN, mt8173_nor->base +
> > +		       MTK_NOR_DUAL_REG);
> > +		break;
> > +	case SPI_NOR_QUAD:
> > +		writeb(SPINOR_OP_READ_1_1_4, mt8173_nor->base +
> > +		       MTK_NOR_PRGDATA3_REG);
> > +		writeb(MTK_NOR_QUAD_READ_EN, mt8173_nor->base +
> > +		       MTK_NOR_DUAL_REG);
> > +		break;
> > +	default:
> > +		writeb(SPINOR_OP_READ, mt8173_nor->base +
> > +		       MTK_NOR_PRGDATA3_REG);
> > +		writeb(MTK_NOR_DUAL_DISABLE, mt8173_nor->base +
> > +		       MTK_NOR_DUAL_REG);
> > +		break;
> > +	}
> > +}
> > +
> > +static int mt8173_nor_polling_reg(struct mt8173_nor *mt8173_nor, int compare)
> > +{
> > +	int reg, ret;
> > +
> > +	ret =  readl_poll_timeout(mt8173_nor->base + MTK_NOR_CMD_REG, reg,
> > +				  !(reg & compare), 100, 10000);
> > +	if (ret)
> > +		dev_err(mt8173_nor->dev, "compare val%02X timeout!\n", compare);
> > +	return ret;
> > +}
> > +
> > +static int mt8173_nor_execute_cmd(struct mt8173_nor *mt8173_nor, u8 cmdval)
> > +{
> > +	u8 val = cmdval & 0x1f;
> > +
> > +	writeb(cmdval, mt8173_nor->base + MTK_NOR_CMD_REG);
> > +	return mt8173_nor_polling_reg(mt8173_nor, val);
> 
> mt8173_nor_polling_reg() is used only once here. You can inline the code
> here.
> 
Ok, I will fixed it .
> > +}
> > +
> > +static int mt8173_nor_set_cmd(struct mt8173_nor *mt8173_nor, int addr,
> > +			      int len, int op)
> > +{
> > +	writeb(op, mt8173_nor->base + MTK_NOR_PRGDATA5_REG);
> > +	/* reset the following register */
> 
> We see that some register writes follow, this comment doesn't contain
> any additional information.
I will added more comments here .
> 
> > +	writeb(LoByte(HiWord(addr)), mt8173_nor->base + MTK_NOR_PRGDATA4_REG);
> > +	writeb(HiByte(LoWord(addr)), mt8173_nor->base + MTK_NOR_PRGDATA3_REG);
> > +	writeb(LoByte(LoWord(addr)), mt8173_nor->base + MTK_NOR_PRGDATA2_REG);
> 
> Just do a:
> 
> (addr >> 16) & 0xff
> (addr >> 8) & 0xff
> addr & 0xff
> 
> It's a pattern every lowlevel programmer recognizes without thinking
> about it. Same for the other places where these defines are used.
Yes, Thanks for your remind!
> 
> > +	writeb(len, mt8173_nor->base + MTK_NOR_CNT_REG);
> > +	return mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PRG_CMD);
> > +}
> > +
> > +static int mt8173_nor_get_para(struct mt8173_nor *mt8173_nor, u8 *buf, int len)
> > +{
> > +	if (len > 1) {
> > +		/* read JEDEC ID need 4 bytes commands */
> > +		mt8173_nor_set_cmd(mt8173_nor, 0, 32, SPINOR_OP_RDID);
> > +		buf[2] = readb(mt8173_nor->base + MTK_NOR_SHREG0_REG);
> > +		buf[1] = readb(mt8173_nor->base + MTK_NOR_SHREG1_REG);
> > +		buf[0] = readb(mt8173_nor->base + MTK_NOR_SHREG2_REG);
> > +	} else {
> > +		if (mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_RDSR_CMD)) {
> > +			dev_err(mt8173_nor->dev, "read status failed!\n");
> > +			return -EINVAL;
> > +		}
> > +		*buf = readb(mt8173_nor->base + MTK_NOR_RDSR_REG);
> > +	}
> > +	return 0;
> > +}
> > +
> > +/* cmd1 sent to nor flash, cmd2 write to nor controller */
> > +static int mt8173_nor_set_para(struct mt8173_nor *mt8173_nor, int cmd1,
> > +			       int cmd2)
> > +{
> > +	if (mt8173_nor_set_cmd(mt8173_nor, 0, 8, SPINOR_OP_WREN)) {
> > +		dev_err(mt8173_nor->dev,
> > +			"write enable failed in write protect!\n");
> > +		return -EINVAL;
> > +	}
> > +	writeb(cmd1, mt8173_nor->base + MTK_NOR_PRGDATA5_REG);
> > +	writeb(8, mt8173_nor->base + MTK_NOR_CNT_REG);
> > +	if (mt8173_nor_execute_cmd(mt8173_nor, cmd2)) {
> > +		dev_err(mt8173_nor->dev, "execute cmd failed!\n");
> 
> mt8173_nor_execute_cmd() will already have printed an error message.
OK, I will remove this error message!
> 
> > +		return -EINVAL;
> > +	}
> > +	return 0;
> > +}
> > +
> > +static int mt8173_nor_write_buffer_enable(struct mt8173_nor *mt8173_nor)
> > +{
> > +	u8 reg, ret;
> > +
> > +	writel(MTK_NOR_WR_BUF_ENABLE, mt8173_nor->base + MTK_NOR_CFG2_REG);
> > +	ret =  readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg,
> > +				  0x01 == (reg & 0x01), 100, 10000);
> > +	if (ret)
> > +		dev_err(mt8173_nor->dev, "timeout!\n");
> > +	return ret;
> > +}
> > +
> > +static int mt8173_nor_write_buffer_disable(struct mt8173_nor *mt8173_nor)
> > +{
> > +	u8 reg, ret;
> > +
> > +	writel(MTK_NOR_WR_BUF_DISABLE, mt8173_nor->base + MTK_NOR_CFG2_REG);
> > +	ret =  readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg,
> > +				  MTK_NOR_WR_BUF_DISABLE == (reg & 0xf), 100,
> > +				  10000);
> > +	if (ret)
> > +		dev_err(mt8173_nor->dev, "compare timeout!\n");
> > +	return ret;
> > +}
> > +
> > +static int mt8173_nor_erase_sector(struct spi_nor *nor, loff_t offset)
> > +{
> > +	struct mt8173_nor *mt8173_nor = nor->priv;
> > +
> > +	if (mt8173_nor_set_cmd(mt8173_nor, 0, 8, SPINOR_OP_WREN)) {
> > +		dev_err(mt8173_nor->dev,
> > +			"write enable failed in erase sector!\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	mt8173_nor_set_cmd(mt8173_nor, (int)offset, 32, SPINOR_OP_BE_4K);
> > +	return 0;
> > +}
> > +
> > +static int mt8173_nor_read_hw(struct mt8173_nor *mt8173_nor, int addr, int len,
> > +			      int *retlen, u8 *buf)
> > +{
> > +	int ret = 0, i;
> > +
> > +	mt8173_nor_set_read_mode(mt8173_nor);
> > +	writeb(HiByte(HiWord(addr)), mt8173_nor->base + MTK_NOR_RADR3_REG);
> > +	writeb(LoByte(HiWord(addr)), mt8173_nor->base + MTK_NOR_RADR2_REG);
> > +	writeb(HiByte(LoWord(addr)), mt8173_nor->base + MTK_NOR_RADR1_REG);
> > +	writeb(LoByte(LoWord(addr)), mt8173_nor->base + MTK_NOR_RADR0_REG);
> > +
> > +	for (i = 0; i < len; i++, (*retlen)++) {
> > +		if (mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PIO_READ_CMD)) {
> > +			dev_err(mt8173_nor->dev, "read flash failed!\n");
> > +			return -EINVAL;
> > +		}
> > +		buf[i] = readb(mt8173_nor->base + MTK_NOR_RDATA_REG);
> > +	}
> > +	return ret;
> 
> ret will always be 0 here, drop the ret variable.
OK, I will drop the ret variable!
> 
> > +}
> > +
> > +static int mt8173_nor_read(struct spi_nor *nor, loff_t from, size_t len,
> > +			   size_t *retlen, u_char *buf)
> > +{
> > +	struct mt8173_nor *mt8173_nor = nor->priv;
> > +
> > +	return mt8173_nor_read_hw(mt8173_nor, (int)from, (int)len,
> > +				 (int *)retlen, (u8 *)buf);
> 
> mt8173_nor_read_hw is used only once here, no need for a separate
> function.
OK, I will remove the mt8173_nor_read_hw
> 
> > +}
> > +
> > +static int mt8173_nor_write_single_byte(struct mt8173_nor *mt8173_nor,
> > +					int u4addr, u8 u1data)
> > +{
> > +	if (u4addr >= mt8173_nor->mtd.size) {
> > +		dev_err(mt8173_nor->dev, "invalid write address!\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	writeb(u1data, mt8173_nor->base + MTK_NOR_WDATA_REG);
> > +	writeb(LoByte(HiWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR2_REG);
> > +	writeb(HiByte(LoWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR1_REG);
> > +	writeb(LoByte(LoWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR0_REG);
> > +
> > +	if (mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WR_CMD)) {
> > +		dev_err(mt8173_nor->dev, "write byte offset%08x\n", u4addr);
> > +		return -EINVAL;
> > +	}
> > +	return 0;
> > +}
> > +
> > +static int mt8173_nor_write_buffer(struct mt8173_nor *mt8173_nor, int u4addr,
> > +				   int u4len, const u8 *buf)
> > +{
> > +	int i, j, bufidx, data;
> > +
> > +	if (!buf)
> > +		return -EINVAL;
> > +
> > +	writeb(LoByte(HiWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR2_REG);
> > +	writeb(HiByte(LoWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR1_REG);
> > +	writeb(LoByte(LoWord(u4addr)), mt8173_nor->base + MTK_NOR_RADR0_REG);
> > +
> > +	bufidx = 0;
> > +	for (i = 0; i < u4len; i += 4) {
> > +		for (j = 0; j < 4; j++) {
> > +			(*((u8 *)&data + j)) = buf[bufidx];
> > +			bufidx++;
> > +		}
> > +		writel(data, mt8173_nor->base + MTK_NOR_PP_DATA_REG);
> > +	}
> > +
> > +	if (mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WR_CMD)) {
> > +		dev_err(mt8173_nor->dev, "write buffer offset:%08x\n", u4addr);
> > +		return -EINVAL;
> > +	}
> > +	return 0;
> > +}
> > +
> > +static void mt8173_nor_write(struct spi_nor *nor, loff_t to, size_t len,
> > +			     size_t *retlen, const u_char *buf)
> > +{
> > +	struct mt8173_nor *mt8173_nor = nor->priv;
> > +	size_t i;
> > +
> > +	if (nor->page_size == len) {
> > +		if (mt8173_nor_write_buffer_enable(mt8173_nor))
> > +			dev_err(mt8173_nor->dev, "write buffer enable failed !\n");
> > +		while (len > 0) {
> > +			mt8173_nor_write_buffer(mt8173_nor, to,
> > +						SFLASH_WRBUF_SIZE, buf);
> > +			len -= SFLASH_WRBUF_SIZE;
> > +			to += SFLASH_WRBUF_SIZE;
> > +			buf += SFLASH_WRBUF_SIZE;
> > +			(*retlen) += SFLASH_WRBUF_SIZE;
> > +		}
> > +		if (mt8173_nor_write_buffer_disable(mt8173_nor))
> > +			dev_err(mt8173_nor->dev, "write buffer disable failed !\n");
> > +	} else {
> > +		for (i = 0; i < len; i++,  (*retlen)++) {
> > +			if (mt8173_nor_write_single_byte(mt8173_nor, to, *buf))
> > +				dev_err(mt8173_nor->dev, "write byte failed !\n");
> > +			to++;
> > +			buf++;
> > +		}
> > +	}
> > +}
> 
> Instead of using the buffer write method only for page_size sized writes
> I would expect a behaviour of this function like:
> 
> 	while (len > SFLASH_WRBUF_SIZE) {
> 		write_buffer();
> 		len -= SFLASH_WRBUF_SIZE;
> 	}
> 
> 	while (len) {
> 		write_single_byte();
> 		len--;
> 	}
> 
OK, I will use this method, Thanks for your instruct !
> > +
> > +static int mt8173_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
> > +{
> > +	int ret = 0;
> > +	struct mt8173_nor *mt8173_nor = nor->priv;
> > +	/* mtk nor controller haven't supoort SPINOR_OP_RDCR */
> > +	if (opcode == SPINOR_OP_RDID || opcode == SPINOR_OP_RDSR)
> > +		ret = mt8173_nor_get_para(mt8173_nor, buf, len);
> > +	else
> > +		dev_warn(mt8173_nor->dev, "invalid cmd %d\n", opcode);
> > +
> > +	return ret;
> > +}
> > +
> > +static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
> > +				int len, int write_enable)
> > +{
> > +	int ret, cmd_to_nor, cmd_to_controller;
> > +	struct mt8173_nor *mt8173_nor = nor->priv;
> > +
> > +	if (opcode == SPINOR_OP_WRSR || opcode == SPINOR_OP_CHIP_ERASE) {
> > +		if (len > 0) {
> > +			cmd_to_nor = *buf;
> > +			cmd_to_controller = MTK_NOR_WRSR_CMD;
> > +		} else {
> > +			cmd_to_nor = opcode;
> > +			cmd_to_controller = MTK_NOR_PRG_CMD;
> > +		}
> > +		ret = mt8173_nor_set_para(mt8173_nor, cmd_to_nor,
> > +					  cmd_to_controller);
> > +	} else if (opcode == SPINOR_OP_WREN || opcode == SPINOR_OP_WRDI) {
> > +		ret = mt8173_nor_set_cmd(mt8173_nor, 0, 8, opcode);
> > +	} else {
> > +		dev_warn(mt8173_nor->dev, "have not support cmd %d\n", opcode);
> > +		ret = -EINVAL;
> > +	}
> > +	return ret;
> > +}
> > +
> > +static int __init mtk_nor_init(struct mt8173_nor *mt8173_nor,
> > +			       struct mtd_part_parser_data ppdata)
> 
> Why a copy and not a pointer to struct mtd_part_parser_data?
You are right, it seems a pointer will be more suitable
> 
> > +{
> > +	int ret;
> > +	struct spi_nor *nor;
> > +	struct mtd_info *mtd;
> > +
> > +	writel(MTK_NOR_ENABLE_SF_CMD, mt8173_nor->base + MTK_NOR_WRPROT_REG);
> > +	nor = &mt8173_nor->nor;
> > +	mtd = &mt8173_nor->mtd;
> > +	nor->mtd = mt8173_nor->mtd;
> > +	nor->dev = mt8173_nor->dev;
> > +	nor->priv = mt8173_nor;
> > +	mtd->priv = nor;
> > +
> > +	/* fill the hooks to spi nor */
> > +	nor->read = mt8173_nor_read;
> > +	nor->read_reg = mt8173_nor_read_reg;
> > +	nor->write = mt8173_nor_write;
> > +	nor->write_reg = mt8173_nor_write_reg;
> > +	nor->erase = mt8173_nor_erase_sector;
> > +	nor->mtd.owner = THIS_MODULE;
> > +	nor->mtd.name = "mtk_nor";
> > +	/* initialized with NULL */
> > +	ret = spi_nor_scan(nor, NULL, SPI_NOR_DUAL);
> > +	if (ret) {
> > +		dev_err(mt8173_nor->dev, "spi_nor_scan failed !\n");
> > +		return -EINVAL;
> 
> Just forward the error from spi_nor_scan.
Ok, I will fixed it !
> 
> > +	}
> > +	dev_dbg(mt8173_nor->dev, "mtd->size :0x%llx!\n", mtd->size);
> > +	ret = mtd_device_parse_register(&nor->mtd, NULL, &ppdata, NULL, 0);
> > +
> > +	return ret;
> > +}
> > +
> > +static int mtk_nor_drv_probe(struct platform_device *pdev)
> > +{
> > +	struct device_node *np = pdev->dev.of_node;
> > +	struct mtd_part_parser_data ppdata;
> > +	struct resource *res;
> > +	int ret;
> > +	struct mt8173_nor *mt8173_nor = devm_kzalloc(&pdev->dev,
> > +		sizeof(*mt8173_nor), GFP_KERNEL);
> > +
> > +	if (!pdev->dev.of_node) {
> > +		dev_err(&pdev->dev, "No DT found\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	if (!mt8173_nor)
> > +		return -ENOMEM;
> > +	platform_set_drvdata(pdev, mt8173_nor);
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	mt8173_nor->base = devm_ioremap_resource(&pdev->dev, res);
> > +	if (IS_ERR(mt8173_nor->base)) {
> > +		ret = PTR_ERR(mt8173_nor->base);
> > +		goto nor_free;
> > +	}
> > +
> > +	mt8173_nor->spi_clk = devm_clk_get(&pdev->dev, "spi_clk");
> > +	if (IS_ERR(mt8173_nor->spi_clk)) {
> > +		ret = PTR_ERR(mt8173_nor->spi_clk);
> > +		goto nor_free;
> > +	}
> > +
> > +	mt8173_nor->src_axi_clk = devm_clk_get(&pdev->dev, "axi_clk");
> > +	if (IS_ERR(mt8173_nor->src_axi_clk)) {
> > +		ret = PTR_ERR(mt8173_nor->src_axi_clk);
> > +		goto nor_free;
> > +	}
> > +
> > +	mt8173_nor->sf_mux_clk = devm_clk_get(&pdev->dev, "mux_clk");
> > +	if (IS_ERR(mt8173_nor->sf_mux_clk)) {
> > +		ret = PTR_ERR(mt8173_nor->sf_mux_clk);
> > +		goto nor_free;
> > +	}
> > +
> > +	mt8173_nor->nor_clk = devm_clk_get(&pdev->dev, "sf_clk");
> > +	if (IS_ERR(mt8173_nor->nor_clk)) {
> > +		ret = PTR_ERR(mt8173_nor->nor_clk);
> > +		goto nor_free;
> > +	}
> > +
> > +	mt8173_nor->dev = &pdev->dev;
> > +	clk_prepare_enable(mt8173_nor->spi_clk);
> > +	clk_prepare_enable(mt8173_nor->src_axi_clk);
> > +	clk_prepare_enable(mt8173_nor->sf_mux_clk);
> > +	clk_prepare_enable(mt8173_nor->nor_clk);
> > +	clk_set_parent(mt8173_nor->nor_clk, mt8173_nor->sf_mux_clk);
> 
> sf_mux_clk is inherently enabled when you enable one of its child
> clocks, like nor_clk in this case, so you don't have to enable it
> explicitly.
> Also putting knowledge of the SoCs clock layout into the driver is a bad
> idea. There is the assigned-clock-parents binding which you can use here
> for assigning the clock parent.
Ok. I will not to enable the parent clock here.

> 
> > +
> > +	ppdata.of_node = np;
> > +	ret = mtk_nor_init(mt8173_nor, ppdata);
> > +
> > +nor_free:
> > +	return ret;
> > +}
> > +
> > +static int mtk_nor_drv_remove(struct platform_device *pdev)
> > +{
> > +	struct mt8173_nor *mt8173_nor = platform_get_drvdata(pdev);
> > +
> > +	clk_disable_unprepare(mt8173_nor->spi_clk);
> > +	clk_disable_unprepare(mt8173_nor->src_axi_clk);
> > +	clk_disable_unprepare(mt8173_nor->sf_mux_clk);
> > +	clk_disable_unprepare(mt8173_nor->nor_clk);
> > +	mtd_device_unregister(&mt8173_nor->mtd);
> 
> This order is wrong. You should not disable clocks on a device that
> might be active. You should unregister it first and disable the clocks
> afterwards.

OK , I will change the order, and Thanks for your instruct again ! 
> 
> Sascha
> 
> 





More information about the linux-arm-kernel mailing list