[PATCH 4/4] devicetree: bindings:Allwinner sun4i keypad

[Maxime Ripard]

On Wed, Sep 16, 2015 at 12:05:57AM +1000, yassinjaffer at gmail.com wrote:
> From: Yassin Jaffer <yassinjaffer at gmail.com>
> 
> Signed-off-by: Yassin Jaffer <yassinjaffer at gmail.com>
> ---
>  .../devicetree/bindings/input/sun4i-keypad.txt     | 56 ++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/sun4i-keypad.txt
> 
> diff --git a/Documentation/devicetree/bindings/input/sun4i-keypad.txt b/Documentation/devicetree/bindings/input/sun4i-keypad.txt
> new file mode 100644
> index 0000000..60ed0f2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/sun4i-keypad.txt
> @@ -0,0 +1,56 @@
> +Allwinner sun4i keypad
> +------------------------------------------------
> +
> +Required properties:
> + - compatible: "allwinner,sun4i-a10-keypad"
> + - reg: mmio address range of the chip
> + - interrupts: interrupt to which the chip is connected
> + - clocks : shall reference keypad controller clocks.
> + - clock-names : keypad controller internal clock names. Shall contain :
> +    * "apb" : APB gating clock
> +    * "keypad" : keypad controller clock
> +
> +Required Board Specific Properties:
> +- pinctrl-names: The definition can be found at
> +pinctrl/pinctrl-bindings.txt.
> +
> +- pinctrl-0: The definition can be found at
> +pinctrl/pinctrl-bindings.txt.
> +
> +- linux,keymap: The definition can be found at
> +bindings/input/matrix-keymap.txt.
> +
> +Optional properties:
> + - scan-cycle: device specific scan cycle
> + - debounce-cycle: device specific debounce cycle
> + - autorepeat: If specified device will autorepeat

Are those properties generic? I couldn't find them defined anywhere.

In which units are those properties?

> +
> +Example:
> +
> +#include <dt-bindings/input/input.h>
> +
> +	kp: kp at 01c23000 {
> +		compatible = "allwinner,sun4i-a10-keypad";
> +		reg = <0x01c23000 0x400>;
> +		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&apb0_gates 10>, <&keypad_clk>;
> +		clock-names = "apb", "keypad";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&keypad_rows>, <&keypad_cols>;
> +		linux,keymap = <0x00000067	/* KEY_UP */
> +				0x0001006c	/* KEY_DOWN */
> +				0x00020072	/* KEY_VOLUMEDOWN */
> +				0x00030066	/* KEY_HOME */
> +				0x0100006a	/* KEY_RIGHT */
> +				0x01010069	/* KEY_LEFT */
> +				0x0102001c	/* KEY_ENTER */
> +				0x01030073	/* KEY_VOLUMEUP */
> +				0x02000040	/* KEY_F6 */
> +				0x02010042	/* KEY_F8 */
> +				0x02020043	/* KEY_F9 */
> +				0x02030044	/* KEY_F10 */
> +				0x0300003b	/* KEY_F1 */
> +				0x0301003c	/* KEY_F2 */
> +				0x0302003d	/* KEY_F3 */
> +				0x03030074>;	/* KEY_POWER */

You don't seem to use the header you just told us to include.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150915/9a2d4edb/attachment.sig>