[RFC PATCH v7 01/10] mmc: dw_mmc: Add external dma interface support
Jaehoon Chung
jh80.chung at samsung.com
Tue Sep 15 01:08:52 PDT 2015
Hi, Shawn.
Sorry for late review.
On 08/24/2015 10:25 AM, Shawn Lin wrote:
> DesignWare MMC Controller can supports two types of DMA
> mode: external dma and internal dma. We get a RK312x platform
> integrated dw_mmc and ARM pl330 dma controller. This patch add
> edmac ops to support these platforms. I've tested it on RK31xx
> platform with edmac mode and RK3288 platform with idmac mode.
>
> Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com>
>
> ---
>
> Changes in v7:
> - rebased on Ulf's next
> - combine condition state
> - elaborate more about DMA_INTERFACE
> - define some macro for DMA_INERFACE value
> - spilt HCON ops' changes into another patch
>
> Changes in v6:
> - add trans_mode condition for IDMAC initialization
> suggested by Heiko
> - re-test my patch on rk3188 platform and update commit msg
> - update performance of pio vs edmac in cover letter
>
> Changes in v5:
> - add the title of cover letter
> - fix typo of comment
> - add macro for reading HCON register
> - add "Acked-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>" for exynos_defconfig patch
> - add "Acked-by: Vineet Gupta <vgupta at synopsys.com>" for axs10x_defconfig patch
> - add "Acked-by: Govindraj Raja <govindraj.raja at imgtec.com>" and
> "Acked-by: Ralf Baechle <ralf at linux-mips.org>" for pistachio_defconfig patch
> - add "Acked-by: Joachim Eastwood <manabian at gmail.com>" for lpc18xx_defconfig patch
> - add "Acked-by: Wei Xu <xuwei5 at hisilicon.com>" for hisi_defconfig patch
> - rebase on "https://github.com/jh80chung/dw-mmc.git tags/dw-mmc-for-ulf-v4.2" for merging easily
>
> Changes in v4:
> - remove "host->trans_mode" and use "host->use_dma" to indicate
> transfer mode.
> - remove all bt-bindings' changes since we don't need new properities.
> - check transfer mode at runtime by reading HCON reg
> - spilt defconfig changes for each sub-architecture
> - fix the title of cover letter
> - reuse some code for reducing code size
>
> Changes in v3:
> - choose transfer mode at runtime
> - remove all CONFIG_MMC_DW_IDMAC config option
> - add supports-idmac property for some platforms
>
> Changes in v2:
> - Fix typo of dev_info msg
> - remove unused dmach from declaration of dw_mci_dma_slave
>
> drivers/mmc/host/Kconfig | 11 +-
> drivers/mmc/host/dw_mmc-pltfm.c | 2 +
> drivers/mmc/host/dw_mmc.c | 273 ++++++++++++++++++++++++++++++++--------
> drivers/mmc/host/dw_mmc.h | 6 +
> include/linux/mmc/dw_mmc.h | 23 +++-
> 5 files changed, 253 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 6a0f9c7..539b1a6 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -607,15 +607,7 @@ config MMC_DW
> help
> This selects support for the Synopsys DesignWare Mobile Storage IP
> block, this provides host support for SD and MMC interfaces, in both
> - PIO and external DMA modes.
> -
> -config MMC_DW_IDMAC
> - bool "Internal DMAC interface"
> - depends on MMC_DW
> - help
> - This selects support for the internal DMAC block within the Synopsys
> - Designware Mobile Storage IP block. This disables the external DMA
> - interface.
> + PIO, internal DMA mode and external DMA mode.
In future, i will add the quirk for broken IDMAC.
This patch is absolutely depended on HCON register, but some IP can be broken it.
how about?
>
> config MMC_DW_PLTFM
> tristate "Synopsys Designware MCI Support as platform device"
> @@ -644,7 +636,6 @@ config MMC_DW_K3
> tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
> depends on MMC_DW
> select MMC_DW_PLTFM
> - select MMC_DW_IDMAC
> help
> This selects support for Hisilicon K3 SoC specific extensions to the
> Synopsys DesignWare Memory Card Interface driver. Select this option
> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
> index ec6dbcd..7e1d13b 100644
> --- a/drivers/mmc/host/dw_mmc-pltfm.c
> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
> host->pdata = pdev->dev.platform_data;
>
> regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + /* Get registers' physical base address */
> + host->phy_regs = (void *)(regs->start);
> host->regs = devm_ioremap_resource(&pdev->dev, regs);
> if (IS_ERR(host->regs))
> return PTR_ERR(host->regs);
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index fcbf552..9c91983 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -56,7 +56,6 @@
> #define DW_MCI_FREQ_MAX 200000000 /* unit: HZ */
> #define DW_MCI_FREQ_MIN 400000 /* unit: HZ */
>
> -#ifdef CONFIG_MMC_DW_IDMAC
> #define IDMAC_INT_CLR (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
> SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
> SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
> @@ -102,7 +101,6 @@ struct idmac_desc {
>
> /* Each descriptor can transfer up to 4KB of data in chained mode */
> #define DW_MCI_DESC_DATA_LENGTH 0x1000
> -#endif /* CONFIG_MMC_DW_IDMAC */
>
> static bool dw_mci_reset(struct dw_mci *host);
> static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
> @@ -407,7 +405,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
> return DMA_FROM_DEVICE;
> }
>
> -#ifdef CONFIG_MMC_DW_IDMAC
> static void dw_mci_dma_cleanup(struct dw_mci *host)
> {
> struct mmc_data *data = host->data;
> @@ -445,12 +442,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host)
> mci_writel(host, BMOD, temp);
> }
>
> -static void dw_mci_idmac_complete_dma(struct dw_mci *host)
> +static void dw_mci_dmac_complete_dma(void *arg)
> {
> + struct dw_mci *host = arg;
> struct mmc_data *data = host->data;
>
> dev_vdbg(host->dev, "DMA complete\n");
>
> + if ((host->use_dma == TRANS_MODE_EDMAC) &&
> + data && (data->flags & MMC_DATA_READ))
> + /* Invalidate cache after read */
> + dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
> + data->sg,
> + data->sg_len,
> + DMA_FROM_DEVICE);
> +
> host->dma_ops->cleanup(host);
>
> /*
> @@ -564,7 +570,7 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
> wmb(); /* drain writebuffer */
> }
>
> -static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
> +static int dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
> {
> u32 temp;
>
> @@ -589,6 +595,8 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>
> /* Start it running */
> mci_writel(host, PLDMND, 1);
> +
> + return 0;
> }
>
> static int dw_mci_idmac_init(struct dw_mci *host)
> @@ -669,10 +677,112 @@ static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
> .init = dw_mci_idmac_init,
> .start = dw_mci_idmac_start_dma,
> .stop = dw_mci_idmac_stop_dma,
> - .complete = dw_mci_idmac_complete_dma,
> + .complete = dw_mci_dmac_complete_dma,
> + .cleanup = dw_mci_dma_cleanup,
> +};
> +
> +static void dw_mci_edmac_stop_dma(struct dw_mci *host)
> +{
> + dmaengine_terminate_all(host->dms->ch);
Does it need not to check "return value"?
> +}
> +
> +static int dw_mci_edmac_start_dma(struct dw_mci *host,
> + unsigned int sg_len)
> +{
> + struct dma_slave_config cfg;
> + struct dma_async_tx_descriptor *desc = NULL;
> + struct scatterlist *sgl = host->data->sg;
> + const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
> + u32 sg_elems = host->data->sg_len;
> + u32 fifoth_val;
> + u32 fifo_offset = host->fifo_reg - host->regs;
> + int ret = 0;
> +
> + /* Set external dma config: burst size, burst width */
> + cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
> + cfg.src_addr = cfg.dst_addr;
> + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +
> + /* Match burst msize with external dma config */
> + fifoth_val = mci_readl(host, FIFOTH);
> + cfg.dst_maxburst = mszs[(fifoth_val >> 28) & 0x7];
> + cfg.src_maxburst = cfg.dst_maxburst;
The above configuration needs to set it at every time?
> +
> + if (host->data->flags & MMC_DATA_WRITE)
> + cfg.direction = DMA_MEM_TO_DEV;
> + else /* MMC_DATA_READ */
Can be removed the comment.
> + cfg.direction = DMA_DEV_TO_MEM;
> +
> + ret = dmaengine_slave_config(host->dms->ch, &cfg);
> + if (ret) {
> + dev_err(host->dev, "Failed to config edmac.\n");
> + return -EBUSY;
> + }
> +
> + desc = dmaengine_prep_slave_sg(host->dms->ch, sgl,
> + sg_len, cfg.direction,
> + DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> + if (!desc) {
> + dev_err(host->dev, "Can't prepare slave sg.\n");
> + return -EBUSY;
> + }
> +
> + /* Set dw_mci_dmac_complete_dma as callback */
> + desc->callback = dw_mci_dmac_complete_dma;
> + desc->callback_param = (void *)host;
> + dmaengine_submit(desc);
> +
> + /* Flush cache before write */
> + if (host->data->flags & MMC_DATA_WRITE)
> + dma_sync_sg_for_device(mmc_dev(host->cur_slot->mmc), sgl,
> + sg_elems, DMA_TO_DEVICE);
> +
> + dma_async_issue_pending(host->dms->ch);
> +
> + return 0;
> +}
> +
> +static int dw_mci_edmac_init(struct dw_mci *host)
> +{
> + /* Request external dma channel */
> + host->dms = kzalloc(sizeof(struct dw_mci_dma_slave), GFP_KERNEL);
> + if (!host->dms)
> + return -ENOMEM;
> +
> + host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx");
> + if (!host->dms->ch) {
> + dev_err(host->dev,
> + "Failed to get external DMA channel %d\n",
> + host->dms->ch->chan_id);
> + kfree(host->dms);
> + host->dms = NULL;
> + return -ENXIO;
> + }
> +
> + return 0;
> +}
> +
> +static void dw_mci_edmac_exit(struct dw_mci *host)
> +{
> + if (host->dms) {
> + if (host->dms->ch) {
> + dma_release_channel(host->dms->ch);
> + host->dms->ch = NULL;
> + }
> + kfree(host->dms);
> + host->dms = NULL;
> + }
> +}
> +
> +static const struct dw_mci_dma_ops dw_mci_edmac_ops = {
> + .init = dw_mci_edmac_init,
> + .exit = dw_mci_edmac_exit,
> + .start = dw_mci_edmac_start_dma,
> + .stop = dw_mci_edmac_stop_dma,
> + .complete = dw_mci_dmac_complete_dma,
> .cleanup = dw_mci_dma_cleanup,
> };
> -#endif /* CONFIG_MMC_DW_IDMAC */
>
> static int dw_mci_pre_dma_transfer(struct dw_mci *host,
> struct mmc_data *data,
> @@ -752,7 +862,6 @@ static void dw_mci_post_req(struct mmc_host *mmc,
>
> static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
> {
> -#ifdef CONFIG_MMC_DW_IDMAC
> unsigned int blksz = data->blksz;
> const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
> u32 fifo_width = 1 << host->data_shift;
> @@ -760,6 +869,10 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
> u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
> int idx = ARRAY_SIZE(mszs) - 1;
>
> + /* pio should ship this scenario */
> + if (!host->use_dma)
> + return;
> +
> tx_wmark = (host->fifo_depth) / 2;
> tx_wmark_invers = host->fifo_depth - tx_wmark;
>
> @@ -788,7 +901,6 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
> done:
> fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
> mci_writel(host, FIFOTH, fifoth_val);
> -#endif
> }
>
> static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
> @@ -850,10 +962,12 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
>
> host->using_dma = 1;
>
> - dev_vdbg(host->dev,
> - "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
> - (unsigned long)host->sg_cpu, (unsigned long)host->sg_dma,
> - sg_len);
> + if (host->use_dma == TRANS_MODE_IDMAC)
> + dev_vdbg(host->dev,
> + "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
> + (unsigned long)host->sg_cpu,
> + (unsigned long)host->sg_dma,
> + sg_len);
>
> /*
> * Decide the MSIZE and RX/TX Watermark.
> @@ -875,7 +989,11 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
> mci_writel(host, INTMASK, temp);
> spin_unlock_irqrestore(&host->irq_lock, irqflags);
>
> - host->dma_ops->start(host, sg_len);
> + if (host->dma_ops->start(host, sg_len)) {
> + /* We can't do DMA */
> + dev_err(host->dev, "%s: failed to start DMA.\n", __func__);
> + return -ENODEV;
> + }
>
> return 0;
> }
> @@ -2343,15 +2461,17 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
>
> }
>
> -#ifdef CONFIG_MMC_DW_IDMAC
> - /* Handle DMA interrupts */
> + if (host->use_dma != TRANS_MODE_IDMAC)
> + return IRQ_HANDLED;
> +
> + /* Handle IDMA interrupts */
> if (host->dma_64bit_address == 1) {
> pending = mci_readl(host, IDSTS64);
> if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
> mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
> SDMMC_IDMAC_INT_RI);
> mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
> - host->dma_ops->complete(host);
> + host->dma_ops->complete((void *)host);
> }
> } else {
> pending = mci_readl(host, IDSTS);
> @@ -2359,10 +2479,9 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
> mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
> SDMMC_IDMAC_INT_RI);
> mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
> - host->dma_ops->complete(host);
> + host->dma_ops->complete((void *)host);
> }
> }
> -#endif
>
> return IRQ_HANDLED;
> }
> @@ -2471,13 +2590,21 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
> goto err_host_allocated;
>
> /* Useful defaults if platform data is unset. */
> - if (host->use_dma) {
> + if (host->use_dma == TRANS_MODE_IDMAC) {
> mmc->max_segs = host->ring_size;
> mmc->max_blk_size = 65536;
> mmc->max_seg_size = 0x1000;
> mmc->max_req_size = mmc->max_seg_size * host->ring_size;
> mmc->max_blk_count = mmc->max_req_size / 512;
> + } else if (host->use_dma == TRANS_MODE_EDMAC) {
> + mmc->max_segs = 64;
> + mmc->max_blk_size = 65536;
> + mmc->max_blk_count = 65535;
> + mmc->max_req_size =
> + mmc->max_blk_size * mmc->max_blk_count;
> + mmc->max_seg_size = mmc->max_req_size;
WARNING: suspect code indent for conditional statements (8, 24)
#349: FILE: drivers/mmc/host/dw_mmc.c:2599:
+ } else if (host->use_dma == TRANS_MODE_EDMAC) {
+ mmc->max_segs = 64;
> } else {
> + /* TRANS_MODE_PIO */
> mmc->max_segs = 64;
> mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
> mmc->max_blk_count = 512;
> @@ -2517,35 +2644,79 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
> static void dw_mci_init_dma(struct dw_mci *host)
> {
> int addr_config;
> - /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
> - addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
> -
> - if (addr_config == 1) {
> - /* host supports IDMAC in 64-bit address mode */
> - host->dma_64bit_address = 1;
> - dev_info(host->dev, "IDMAC supports 64-bit address mode.\n");
> - if (!dma_set_mask(host->dev, DMA_BIT_MASK(64)))
> - dma_set_coherent_mask(host->dev, DMA_BIT_MASK(64));
> - } else {
> - /* host supports IDMAC in 32-bit address mode */
> - host->dma_64bit_address = 0;
> - dev_info(host->dev, "IDMAC supports 32-bit address mode.\n");
> - }
> + int trans_mode;
> + struct device *dev = host->dev;
> + struct device_node *np = dev->of_node;
>
> - /* Alloc memory for sg translation */
> - host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
> - &host->sg_dma, GFP_KERNEL);
> - if (!host->sg_cpu) {
> - dev_err(host->dev, "%s: could not alloc DMA memory\n",
> - __func__);
> + /*
> + * Check tansfer mode from HCON[17:16]
> + * Clear the ambiguous description of dw_mmc databook:
> + * 2b'00: No DMA Interface -> Actually means using Internal DMA block
> + * 2b'01: DesignWare DMA Interface -> Synopsys DW-DMA block
> + * 2b'10: Generic DMA Interface -> non-Synopsys generic DMA block
> + * 2b'11: Non DW DMA Interface -> pio only
> + * Compared to DesignWare DMA Interface, Generic DMA Interface has a
> + * simpler request/acknowledge handshake mechanism and both of them
> + * are regarded as external dma master for dw_mmc.
> + * Note: host->use_dma can't take HCON[17:16] value directly for the
> + * the reason mentioned above.
> + */
trans_mode can't take HCON value, but trans_mode reassigned to "TRANS_MODE_IDMAC" or "TRANS_MODE_EDMAC"..
It's reassigned to host->use_dma...why can't use the host->use_dma?
Your code..
1. trans_mode <- HCON value
2. Check trans_mode which interface use.
then trans_mode <- TRANS_MODE_IDMAC/EDMAC/PIO
3. host->use_dma <- trans_mode
isn't?
It can be replaced to "host->use_dma" instead of "trans_mode".
> + trans_mode = SDMMC_GET_TRANS_MODE(mci_readl(host, HCON));
> + if (trans_mode == DMA_INTERFACE_IDMA) {
> + trans_mode = TRANS_MODE_IDMAC;
> + } else if (trans_mode == DMA_INTERFACE_DWDMA ||
> + trans_mode == DMA_INTERFACE_GDMA) {
> + trans_mode = TRANS_MODE_EDMAC;
> + } else {
> + trans_mode = TRANS_MODE_PIO;
> goto no_dma;
> }
>
> /* Determine which DMA interface to use */
> -#ifdef CONFIG_MMC_DW_IDMAC
> - host->dma_ops = &dw_mci_idmac_ops;
> - dev_info(host->dev, "Using internal DMA controller.\n");
> -#endif
> + if (trans_mode == TRANS_MODE_IDMAC) {
> + /*
> + * Check ADDR_CONFIG bit in HCON to find
> + * IDMAC address bus width
> + */
> + addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
> +
> + if (addr_config == 1) {
> + /* host supports IDMAC in 64-bit address mode */
> + host->dma_64bit_address = 1;
> + dev_info(host->dev,
> + "IDMAC supports 64-bit address mode.\n");
> + if (!dma_set_mask(host->dev, DMA_BIT_MASK(64)))
> + dma_set_coherent_mask(host->dev,
> + DMA_BIT_MASK(64));
> + } else {
> + /* host supports IDMAC in 32-bit address mode */
> + host->dma_64bit_address = 0;
> + dev_info(host->dev,
> + "IDMAC supports 32-bit address mode.\n");
> + }
> +
> + /* Alloc memory for sg translation */
> + host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
> + &host->sg_dma, GFP_KERNEL);
> + if (!host->sg_cpu) {
> + dev_err(host->dev,
> + "%s: could not alloc DMA memory\n",
> + __func__);
> + goto no_dma;
> + }
> +
> + host->dma_ops = &dw_mci_idmac_ops;
> + dev_info(host->dev, "Using internal DMA controller.\n");
> + } else {
> + /* TRANS_MODE_EDMAC: check dma bindings again */
> + if ((of_property_count_strings(np, "dma-names") < 0) ||
> + (!of_find_property(np, "dmas", NULL))) {
> + trans_mode = TRANS_MODE_PIO;
> + goto no_dma;
> + }
> + host->dma_ops = &dw_mci_edmac_ops;
> + dev_info(host->dev, "Using external DMA controller.\n");
> + }
>
> if (!host->dma_ops)
> goto no_dma;
This checking seems unnecessary, after applied your code.
Best Regards,
Jaehoon Chung
> @@ -2562,12 +2733,12 @@ static void dw_mci_init_dma(struct dw_mci *host)
> goto no_dma;
> }
>
> - host->use_dma = 1;
> + host->use_dma = trans_mode;
> return;
>
> no_dma:
> dev_info(host->dev, "Using PIO mode.\n");
> - host->use_dma = 0;
> + host->use_dma = trans_mode;
> }
>
> static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset)
> @@ -2650,10 +2821,9 @@ static bool dw_mci_reset(struct dw_mci *host)
> }
> }
>
> -#if IS_ENABLED(CONFIG_MMC_DW_IDMAC)
> - /* It is also recommended that we reset and reprogram idmac */
> - dw_mci_idmac_reset(host);
> -#endif
> + if (host->use_dma == TRANS_MODE_IDMAC)
> + /* It is also recommended that we reset and reprogram idmac */
> + dw_mci_idmac_reset(host);
>
> ret = true;
>
> @@ -3067,6 +3237,9 @@ EXPORT_SYMBOL(dw_mci_remove);
> */
> int dw_mci_suspend(struct dw_mci *host)
> {
> + if (host->use_dma && host->dma_ops->exit)
> + host->dma_ops->exit(host);
> +
> return 0;
> }
> EXPORT_SYMBOL(dw_mci_suspend);
> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
> index 8ce4674..811d467 100644
> --- a/drivers/mmc/host/dw_mmc.h
> +++ b/drivers/mmc/host/dw_mmc.h
> @@ -148,6 +148,12 @@
> #define SDMMC_SET_FIFOTH(m, r, t) (((m) & 0x7) << 28 | \
> ((r) & 0xFFF) << 16 | \
> ((t) & 0xFFF))
> +/* HCON register defines */
> +#define DMA_INTERFACE_IDMA (0x0)
> +#define DMA_INTERFACE_DWDMA (0x1)
> +#define DMA_INTERFACE_GDMA (0x2)
> +#define DMA_INTERFACE_NODMA (0x3)
> +#define SDMMC_GET_TRANS_MODE(x) (((x)>>16) & 0x3)
> /* Internal DMAC interrupt defines */
> #define SDMMC_IDMAC_INT_AI BIT(9)
> #define SDMMC_IDMAC_INT_NI BIT(8)
> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
> index 134c574..f67b2ec 100644
> --- a/include/linux/mmc/dw_mmc.h
> +++ b/include/linux/mmc/dw_mmc.h
> @@ -16,6 +16,7 @@
>
> #include <linux/scatterlist.h>
> #include <linux/mmc/core.h>
> +#include <linux/dmaengine.h>
>
> #define MAX_MCI_SLOTS 2
>
> @@ -40,6 +41,17 @@ enum {
>
> struct mmc_data;
>
> +enum {
> + TRANS_MODE_PIO = 0,
> + TRANS_MODE_IDMAC,
> + TRANS_MODE_EDMAC
> +};
> +
> +struct dw_mci_dma_slave {
> + struct dma_chan *ch;
> + enum dma_transfer_direction direction;
> +};
> +
> /**
> * struct dw_mci - MMC controller state shared between all slots
> * @lock: Spinlock protecting the queue and associated data.
> @@ -154,7 +166,14 @@ struct dw_mci {
> dma_addr_t sg_dma;
> void *sg_cpu;
> const struct dw_mci_dma_ops *dma_ops;
> + /* For idmac */
> unsigned int ring_size;
> +
> + /* For edmac */
> + struct dw_mci_dma_slave *dms;
> + /* Registers's physical base address */
> + void *phy_regs;
> +
> u32 cmd_status;
> u32 data_status;
> u32 stop_cmdr;
> @@ -208,8 +227,8 @@ struct dw_mci {
> struct dw_mci_dma_ops {
> /* DMA Ops */
> int (*init)(struct dw_mci *host);
> - void (*start)(struct dw_mci *host, unsigned int sg_len);
> - void (*complete)(struct dw_mci *host);
> + int (*start)(struct dw_mci *host, unsigned int sg_len);
> + void (*complete)(void *host);
> void (*stop)(struct dw_mci *host);
> void (*cleanup)(struct dw_mci *host);
> void (*exit)(struct dw_mci *host);
>
More information about the linux-arm-kernel
mailing list