[PATCH 1/3] doc: dt: add documentation for Mediatek spi-nor controller

[bayi.cheng]

On Wed, 2015-09-09 at 07:47 +0200, Sascha Hauer wrote:
> On Tue, Sep 08, 2015 at 05:49:54PM +0800, Bayi Cheng wrote:
> > Add device tree binding documentation for serial flash with
> > Mediatek serial flash controller
> > 
> > Signed-off-by: Bayi Cheng <bayi.cheng at mediatek.com>
> > ---
> >  Documentation/devicetree/bindings/mtd/mtk_nor.txt | 25 +++++++++++++++++++++++
> >  1 file changed, 25 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mtd/mtk_nor.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/mtk_nor.txt b/Documentation/devicetree/bindings/mtd/mtk_nor.txt
> > new file mode 100644
> > index 0000000..0eca0cd
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mtd/mtk_nor.txt
> > @@ -0,0 +1,25 @@
> > +* MTD SPI nor driver for MTK MT81xx (and similar) serial flash controller
> > +
> > +MTK MT81xx serial flash controller is designed for serial Flash device.
> > +It supports one Flash device with signal mode, dual mode and quad mode.
> > +
> > +Required properties:
> > +- compatible: should be "mediatek,mt8173-nor";
> > +- reg: physical base address and length of the controller's register
> > +- clocks: spi nor source clock
> > +- clock-names: "spi_clk", "axi_clk", "mux_clk", "sf_clk"
> 
> Drop the _clk suffix. It's the clock-names property which already makes
> it clear that these are clock names.
> 
> Sascha
> 
> 
OK, I will drop the _clk suffix here!