[PATCH 00/11] ARM: OMAP/DTS: dra7/72-evm/beagle-x15: Audio support

[Peter Ujfalusi]

Hi Tony,

On 08/24/2015 10:19 AM, Peter Ujfalusi wrote:
> Hi,
> 
> this series will enable analog audio (via onboard aic310x codec) for dra7-evm,
> dra72-evm and am57xx-beagle-x15 boards.
> In these board McASP3 is connected to the codec and for the McASP3 we needed to
> have the DMA crossbar in place since the request lines are not mapped by
> default.

Did you had a chance to look at this series?

> Regars,
> Peter
> ---
> Peter Ujfalusi (11):
>   ARM: OMAP: DRA7: hwmod: Add data for McASP3
>   ARM: DTS: dra7: Add McASP3 node
>   ARM: DTS: dra7-evm: Rename mmc2_3v3 supply to evm_3v3_sw
>   ARM: DTS: dra7-evm: Add fixed regulator to be used by aic3106's DVDD
>   ARM: DTS: dra7-evm: Enable pcf8575 (0x26 address) on i2c2 bus
>   ARM: DTS: dra7-evm: Audio support
>   ARM: DTS: dra72-evm: Add fixed regulator representing DVDD supply for
>     aic3106
>   ARM: DTS: dra72-evm: Add gpio hog for vin6_sel_s0 to select audio
>   ARM: DTS: dra72-evm: Audio support
>   ARM: DTS: am57xx-beagle-x15: Add fixed regulator for aic3104's DVDD
>   ARM: DTS: am57xx-beagle-x15: Enable analog audio support
> 
>  arch/arm/boot/dts/am57xx-beagle-x15.dts   |  95 ++++++++++++++++++++
>  arch/arm/boot/dts/dra7-evm.dts            | 142 +++++++++++++++++++++++++++++-
>  arch/arm/boot/dts/dra7.dtsi               |  15 ++++
>  arch/arm/boot/dts/dra72-evm.dts           | 138 +++++++++++++++++++++++++++++
>  arch/arm/mach-omap2/omap_hwmod_7xx_data.c |  41 +++++++++
>  5 files changed, 428 insertions(+), 3 deletions(-)
> 


-- 
Péter