[PATCH v4] pinctrl: mediatek: Implement wake handler and suspend resume
maoguang meng
maoguang.meng at mediatek.com
Sat Sep 12 02:50:54 PDT 2015
hi Sudeep:
I test flowlling your blow suggestions,but the system can not be woken.
beacuse,mtk_eint_suspend will mask it.As we know if eint wakeup system
it must be unmasked before enter suspend flow.
e.x
static int __maybe_unused elan_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct elan_tp_data *data = i2c_get_clientdata(client);
int ret;
/*
* We are taking the mutex to make sure sysfs operations are
* complete before we attempt to bring the device into low[er]
* power mode.
*/
ret = mutex_lock_interruptible(&data->sysfs_mutex);
if (ret)
return ret;
disable_irq(client->irq);
if (device_may_wakeup(dev)) {
ret = elan_sleep(data);
/* Enable wake from IRQ */
data->irq_wake = (enable_irq_wake(client->irq) == 0);
} else {
ret = elan_disable_power(data);
}
mutex_unlock(&data->sysfs_mutex);
return ret;
}
thanks
Best Regards,
Maoguang
On Wed, 2015-09-09 at 00:50 +0800, Sudeep Holla wrote:
>
> On 08/09/15 10:28, Sudeep Holla wrote:
> >
> >
> > On 06/09/15 11:39, maoguang meng wrote:
> >> On Wed, 2015-09-02 at 14:02 +0800, Daniel Kurtz wrote:
> >>> Hi maoguang,
> >>>
> >>> On Tue, Aug 25, 2015 at 12:27 AM, Sudeep Holla <sudeep.holla at arm.com> wrote:
> >>>>
> >>>>
> >>>> On 14/08/15 09:38, maoguang.meng at mediatek.com wrote:
> >>>>>
> >>>>> From: Maoguang Meng <maoguang.meng at mediatek.com>
> >>>>>
> >>>>> This patch implement irq_set_wake to get who is wakeup source and
> >>>>> setup on suspend resume.
> >>>>>
> >>>>> Signed-off-by: Maoguang Meng <maoguang.meng at mediatek.com>
> >>>>>
> >>> [snip]
> >>>
> >>> Can you please respond to Sudeep's questions:
> >>>
> >>>> Does this pinmux controller:
> >>>>
> >>>> 1. Support wake-up configuration ? If not, you need to use
> >>>> IRQCHIP_SKIP_SET_WAKE. I don't see any value in writing the
> >>>> mask_{set,clear} if the same registers are used for {en,dis}able
> >>
> >> YES.
> >> we can call enable_irq_wake(irq) to config this irq as a wake-up
> >> source.
> >>
> >
> > No that doesn't answer my question. Yes you can always call
> > enable_irq_wake(irq) as along as you have irq_set_wake implemented.
> > But my question was does this pinmux controller support wake-up
> > configuration.
> >
> > IMHO, by looking at the implementation I can confirm *NO*, it doesn't.
> > So please stop copy-pasting the implementation from other drivers.
> > The reason is you operate on the same mask_{set,clear} which you use
> > to {en,dis}able the interrupts which means you don't have to do anything
> > to configure an interrupt as a wakeup source other than just keeping
> > them enabled. Hopefully this clarifies.
> >
> >>>>
> >>>> 2. Is in always on domain ? If not, you need save/restore only to
> >>>> resume back the functionality. Generally we can set
> >>>> IRQCHIP_MASK_ON_SUSPEND to ensure non-wake-up interrupts are
> >>>> disabled during suspend and re-enabled in resume path. You just
> >>>> save/restore raw values without tracking the wake-up source.
> >>
> >> YES.
> >>
> >
> > Again *YES* for what part of my question. If it's always-on, then you
> > don't need this suspend/resume callbacks at all, so I assume the answer
> > is *NO*.
> >
>
> IIUC this pinmux controller, something like below should work.
>
>
> ---->8
>
> From 7c26992bce047efb66a6ba8d2ffec2b272499df7 Mon Sep 17 00:00:00 2001
> From: Sudeep Holla <sudeep.holla at arm.com>
> Date: Tue, 8 Sep 2015 17:35:38 +0100
> Subject: [PATCH] pinctrl: mediatek: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
>
> The mediatek pinmux controller doesn't provides any facility to configure
> the wakeup sources. So instead of providing redundant irq_set_wake
> functionality, SKIP_SET_WAKE could be set to it. Also there's no need to
> maintain 2 sets of masks.
>
> This patch enables IRQCHIP_SKIP_SET_WAKE and IRQCHIP_MASK_ON_SUSPEND and
> also removes wake_mask.
>
> Cc: Linus Walleij <linus.walleij at linaro.org>
> Cc: Matthias Brugger <matthias.bgg at gmail.com>
> Cc: Hongzhou Yang <hongzhou.yang at mediatek.com>
> Cc: Yingjoe Chen <yingjoe.chen at mediatek.com>
> Cc: Maoguang Meng <maoguang.meng at mediatek.com>
> Cc: Chaotian Jing <chaotian.jing at mediatek.com>
> Cc: linux-gpio at vger.kernel.org
> Cc: linux-mediatek at lists.infradead.org
> Signed-off-by: Sudeep Holla <sudeep.holla at arm.com>
> ---
> drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 24
> +-----------------------
> drivers/pinctrl/mediatek/pinctrl-mtk-common.h | 1 -
> 2 files changed, 1 insertion(+), 24 deletions(-)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> index 7726c6caaf83..d8e194a5bb31 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> @@ -1063,20 +1063,6 @@ static int mtk_eint_set_type(struct irq_data *d,
> return 0;
> }
>
> -static int mtk_eint_irq_set_wake(struct irq_data *d, unsigned int on)
> -{
> - struct mtk_pinctrl *pctl = irq_data_get_irq_chip_data(d);
> - int shift = d->hwirq & 0x1f;
> - int reg = d->hwirq >> 5;
> -
> - if (on)
> - pctl->wake_mask[reg] |= BIT(shift);
> - else
> - pctl->wake_mask[reg] &= ~BIT(shift);
> -
> - return 0;
> -}
> -
> static void mtk_eint_chip_write_mask(const struct mtk_eint_offsets *chip,
> void __iomem *eint_reg_base, u32 *buf)
> {
> @@ -1112,7 +1098,6 @@ static int mtk_eint_suspend(struct device *device)
>
> reg = pctl->eint_reg_base;
> mtk_eint_chip_read_mask(eint_offsets, reg, pctl->cur_mask);
> - mtk_eint_chip_write_mask(eint_offsets, reg, pctl->wake_mask);
>
> return 0;
> }
> @@ -1153,9 +1138,9 @@ static struct irq_chip mtk_pinctrl_irq_chip = {
> .irq_unmask = mtk_eint_unmask,
> .irq_ack = mtk_eint_ack,
> .irq_set_type = mtk_eint_set_type,
> - .irq_set_wake = mtk_eint_irq_set_wake,
> .irq_request_resources = mtk_pinctrl_irq_request_resources,
> .irq_release_resources = mtk_pinctrl_irq_release_resources,
> + .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND,
> };
>
> static unsigned int mtk_eint_init(struct mtk_pinctrl *pctl)
> @@ -1393,13 +1378,6 @@ int mtk_pctrl_init(struct platform_device *pdev,
> }
>
> ports_buf = pctl->devdata->eint_offsets.ports;
> - pctl->wake_mask = devm_kcalloc(&pdev->dev, ports_buf,
> - sizeof(*pctl->wake_mask), GFP_KERNEL);
> - if (!pctl->wake_mask) {
> - ret = -ENOMEM;
> - goto chip_error;
> - }
> -
> pctl->cur_mask = devm_kcalloc(&pdev->dev, ports_buf,
> sizeof(*pctl->cur_mask), GFP_KERNEL);
> if (!pctl->cur_mask) {
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.h
> b/drivers/pinctrl/mediatek/pinctrl-mtk-common.h
> index 55a534338931..acd804a945d8 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.h
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.h
> @@ -267,7 +267,6 @@ struct mtk_pinctrl {
> void __iomem *eint_reg_base;
> struct irq_domain *domain;
> int *eint_dual_edges;
> - u32 *wake_mask;
> u32 *cur_mask;
> };
>
More information about the linux-arm-kernel
mailing list