[PATCH v2 7/9] ARM: STi: DT: STiH407: Add FDMA driver dt nodes.
Peter Griffin
peter.griffin at linaro.org
Fri Sep 11 07:14:29 PDT 2015
These nodes are required to get the fdma driver working
on STiH407 based silicon.
Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
---
arch/arm/boot/dts/stih407-family.dtsi | 51 +++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 838b812..da07474b 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -565,5 +565,56 @@
<&phy_port2 PHY_TYPE_USB3>;
};
};
+
+ fdma0: fdma0-audio at 8e20000 {
+ compatible = "st,stih407-fdma-mpe31";
+ reg = <0x8e20000 0x20000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+ dma-channels = <16>;
+ #dma-cells = <3>;
+ st,fdma-id = <0>;
+ clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "fdma_slim",
+ "fdma_hi",
+ "fdma_low",
+ "fdma_ic";
+ };
+
+ fdma1: fdma1-app at 8e40000 {
+ compatible = "st,stih407-fdma-mpe31";
+ reg = <0x8e40000 0x20000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
+ dma-channels = <16>;
+ #dma-cells = <3>;
+ st,fdma-id = <1>;
+ clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+ <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+ <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "fdma_slim",
+ "fdma_hi",
+ "fdma_low",
+ "fdma_ic";
+ };
+
+ fdma2: fdma2-free_running at 8e60000 {
+ compatible = "st,stih407-fdma-mpe31";
+ reg = <0x8e60000 0x20000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
+ dma-channels = <16>;
+ #dma-cells = <3>;
+ st,fdma-id = <2>;
+ clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+ <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "fdma_slim",
+ "fdma_hi",
+ "fdma_low",
+ "fdma_ic";
+ };
};
};
--
1.9.1
More information about the linux-arm-kernel
mailing list