[PATCH v2 15/23] dmaengine: edma: Cleanup regarding the use of dev around the code
Peter Ujfalusi
peter.ujfalusi at ti.com
Fri Sep 11 05:27:14 PDT 2015
Be consistent and do not mix the use of dev, &pdev->dev, etc in the
functions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
drivers/dma/edma.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 0c995f981936..87fc83800606 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -1177,7 +1177,7 @@ static void edma_execute(struct edma_chan *echan)
j = i + edesc->processed;
edma_write_slot(ecc, echan->slot[i], &edesc->pset[j].param);
edesc->sg_len += edesc->pset[j].len;
- dev_vdbg(echan->vchan.chan.device->dev,
+ dev_vdbg(dev,
"\n pset[%d]:\n"
" chnum\t%d\n"
" slot\t%d\n"
@@ -1828,7 +1828,6 @@ err_no_chan:
static void edma_free_chan_resources(struct dma_chan *chan)
{
struct edma_chan *echan = to_edma_chan(chan);
- struct device *dev = chan->device->dev;
int i;
/* Terminate transfers */
@@ -1850,7 +1849,7 @@ static void edma_free_chan_resources(struct dma_chan *chan)
echan->alloced = false;
}
- dev_dbg(dev, "freeing channel for %u\n", echan->ch_num);
+ dev_dbg(chan->device->dev, "freeing channel for %u\n", echan->ch_num);
}
/* Send pending descriptor to hardware */
@@ -2174,13 +2173,13 @@ static int edma_probe(struct platform_device *pdev)
return ret;
}
- ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
if (ret)
return ret;
- ecc = devm_kzalloc(&pdev->dev, sizeof(*ecc), GFP_KERNEL);
+ ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL);
if (!ecc) {
- dev_err(&pdev->dev, "Can't allocate controller\n");
+ dev_err(dev, "Can't allocate controller\n");
return -ENOMEM;
}
@@ -2325,7 +2324,7 @@ static int edma_probe(struct platform_device *pdev)
ecc->dummy_slot = edma_alloc_slot(ecc, EDMA_SLOT_ANY);
if (ecc->dummy_slot < 0) {
- dev_err(&pdev->dev, "Can't allocate PaRAM dummy slot\n");
+ dev_err(dev, "Can't allocate PaRAM dummy slot\n");
return ecc->dummy_slot;
}
@@ -2334,7 +2333,7 @@ static int edma_probe(struct platform_device *pdev)
dma_cap_set(DMA_CYCLIC, ecc->dma_slave.cap_mask);
dma_cap_set(DMA_MEMCPY, ecc->dma_slave.cap_mask);
- edma_dma_init(ecc, &ecc->dma_slave, &pdev->dev);
+ edma_dma_init(ecc, &ecc->dma_slave, dev);
edma_chan_init(ecc, &ecc->dma_slave, ecc->slave_chans);
@@ -2346,7 +2345,7 @@ static int edma_probe(struct platform_device *pdev)
of_dma_controller_register(node, of_dma_xlate_by_chan_id,
&ecc->dma_slave);
- dev_info(&pdev->dev, "TI EDMA DMA engine driver\n");
+ dev_info(dev, "TI EDMA DMA engine driver\n");
return 0;
@@ -2360,8 +2359,8 @@ static int edma_remove(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct edma_cc *ecc = dev_get_drvdata(dev);
- if (pdev->dev.of_node)
- of_dma_controller_free(pdev->dev.of_node);
+ if (dev->of_node)
+ of_dma_controller_free(dev->of_node);
dma_async_device_unregister(&ecc->dma_slave);
edma_free_slot(ecc, ecc->dummy_slot);
--
2.5.1
More information about the linux-arm-kernel
mailing list