[GIT PULL 9/9] ARM: tegra: Default configuration updates for v4.3-rc1

[Jon Hunter]

On 11/09/15 11:39, Jon Hunter wrote:
> Hi Kevin,
> 
> On 10/09/15 22:29, Kevin Hilman wrote:
> 
> [snip]
> 
>> Since there is no movement on this, and jetson hasn't been boot for
>> multi_v7_defconfig for a while[1], I think it's time to undo the
>> option causing this problem[2] so that v4.3 will actually boot on the
>> jetson.
>>
>> Unless I hear a good reason otherwise, I'll be posting a patch to
>> disable the HDA related options in multi_v7_defconfig.
> 
> So curiosity got the better of this cat, as to why we are not seeing
> this ;-)
> 
> The main difference I see between the tegra_defconfig and 
> multi_v7_defconfig is all the sound drivers are modules (including 
> this one).
> 
> So trying a quick modprobe of the hda-tegra driver I do see it hang ...
> 
> / # modprobe snd-hda-tegra
> [  625.213864] snd_hda_tegra: Unknown symbol azx_probe_codecs (err 0)
> [  625.220215] snd_hda_tegra: Unknown symbol azx_init_streams (err 0)
> [  625.226480] snd_hda_tegra: Unknown symbol azx_stop_all_streams (err 0)
> [  625.233168] snd_hda_tegra: Unknown symbol azx_bus_init (err 0)
> [  625.239062] snd_hda_tegra: Unknown symbol azx_free_streams (err 0)
> [  625.245314] snd_hda_tegra: Unknown symbol azx_init_chip (err 0)
> [  625.251321] snd_hda_tegra: Unknown symbol snd_hda_set_power_save (err 0)
> [  625.258081] snd_hda_tegra: Unknown symbol azx_stop_chip (err 0)
> [  625.264078] snd_hda_tegra: Unknown symbol azx_codec_configure (err 0)
> [  625.270607] snd_hda_tegra: Unknown symbol azx_interrupt (err 0)
> [  840.117528] INFO: task modprobe:137 blocked for more than 120 seconds.
> [  840.124192]       Not tainted 4.2.0-next-20150909-40826-gb799053 #1
> [  840.130584] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [  840.138540] modprobe        D c09ac3a4     0   137     82 0x00000000
> [  840.145123] [<c09ac3a4>] (__schedule) from [<c09ac838>] (schedule+0x34/0x98)
> [  840.152310] [<c09ac838>] (schedule) from [<c09acaac>] (schedule_preempt_disabled+0xc/0x10)
> [  840.160734] [<c09acaac>] (schedule_preempt_disabled) from [<c09adeec>] (__mutex_lock_slowpath+0x9c/0x150)
> [  840.170458] [<c09adeec>] (__mutex_lock_slowpath) from [<c09adfec>] (mutex_lock+0x4c/0x50)
> [  840.178807] [<c09adfec>] (mutex_lock) from [<c062999c>] (__driver_attach+0x44/0x90)
> [  840.186627] [<c062999c>] (__driver_attach) from [<c0627fcc>] (bus_for_each_dev+0x54/0x88)
> [  840.194966] [<c0627fcc>] (bus_for_each_dev) from [<c0628f88>] (bus_add_driver+0xe4/0x1f0)
> [  840.203305] [<c0628f88>] (bus_add_driver) from [<c062a1d0>] (driver_register+0x78/0xf4)
> [  840.211475] [<c062a1d0>] (driver_register) from [<c020ac04>] (do_one_initcall+0x80/0x1d0)
> [  840.219818] [<c020ac04>] (do_one_initcall) from [<c02c8abc>] (do_init_module+0x58/0x354)
> [  840.228081] [<c02c8abc>] (do_init_module) from [<c02afae8>] (load_module+0x17e0/0x1d8c)
> [  840.236258] [<c02afae8>] (load_module) from [<c02b016c>] (SyS_init_module+0xd8/0x138)
> [  840.244260] [<c02b016c>] (SyS_init_module) from [<c0210b00>] (ret_fast_syscall+0x0/0x3c)
> 
> Adding some debug it appears to hang on snd-hda-codec-hdmi  (the following show
> the order in which modules are being loaded) ...
> 
> / # modprobe snd-hda-tegra
> [   22.450276] snd_hda_tegra: err = -2
> [   22.484535] soundcore: err = 0
> [   22.488964] snd: err = 0
> [   22.493242] snd_timer: err = 0
> [   22.498380] snd_pcm: err = 0
> [   22.502479] snd_hda_core: err = 0
> [   22.508337] snd_hda_codec: err = 0
> [   22.513386] snd_hda_tegra: err = 0
> [   22.740216] snd_hda_codec_hdmi: err = 0

Ftrace shows a similar thing ...

/ # cat /debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 8/8   #P:4
#
#                              _-----=> irqs-off
#                             / _----=> need-resched
#                            | / _---=> hardirq/softirq
#                            || / _--=> preempt-depth
#                            ||| /     delay
#           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
#              | |       |   ||||       |         |
        modprobe-110   [000] ....    46.095279: module_load: soundcore 
        modprobe-110   [000] .n..    46.096443: module_load: snd 
        modprobe-110   [000] .n..    46.097719: module_load: snd_timer 
        modprobe-110   [000] ....    46.099242: module_load: snd_pcm 
        modprobe-110   [000] ....    46.100231: module_load: snd_hda_core 
        modprobe-110   [000] ....    46.102418: module_load: snd_hda_codec 
        modprobe-110   [000] ....    46.102915: module_load: snd_hda_tegra 
        modprobe-122   [000] ....    46.341224: module_load: snd_hda_codec_hdmi 

However, would imply that snd-hda-codec-hdmi is loaded ok and the hang occurs afterwards
as the trace message is printed once the module has been loaded.

Jon