earlycon issues in -next with amba-pl011 updates

[Greg Kroah-Hartman]

On Sat, Sep 05, 2015 at 10:42:03PM +0800, Jun Nie wrote:
> 2015-09-04 0:08 GMT+08:00 Marc Zyngier <marc.zyngier at arm.com>:
> > On 03/09/15 16:52, Greg Kroah-Hartman wrote:
> >> On Thu, Sep 03, 2015 at 11:23:15AM +0100, Marc Zyngier wrote:
> >>> On 11/08/15 02:48, Jun Nie wrote:
> >>>> 2015-08-11 7:23 GMT+08:00 Leif Lindholm <leif.lindholm at linaro.org>:
> >>>>> Hi all,
> >>>>>
> >>>>> The kernelci.org bot picked up a complete boot failure (no output past
> >>>>> UEFI stub) with next-20150806 and Tyler bisected it down to somewhere
> >>>>> in
> >>>>> 8cd90e5 uart: pl011: Add support to ZTE ZX296702 uart
> >>>>> 09dcc7d uart: pl011: Improve LCRH register access decision
> >>>>> 2c096a9 uart: pl011: Introduce register look up table
> >>>>> 7b753f3 uart: pl011: Introduce register accessor
> >>>>>
> >>>>> The issue only appears with earlycon on command line, for pl011
> >>>>> consoles.
> >>>>>
> >>>>> Some investigation shows that the cause lies with
> >>>>> commit 7b753f318d14 ("uart: pl011: Introduce register accessor")
> >>>>> and
> >>>>> commit 2c096a9eedc6 ("uart: pl011: Introduce register look up table")
> >>>>>
> >>>>> Specifically, the changes to pl011_putc() are incorrect:
> >>>>> The new pl011_ accessors take a (struct uart_amba_port *) input, but
> >>>>> pl011_putc() directly uses the incoming (struct uart_port *) for this.
> >>>>>
> >>>>> Apart from ending up with an unintended/incorrect UART base address,
> >>>>> the introduction of the lookup table for register offsets also means
> >>>>> the accessors try to dereference (struct uart_amba_port *)->reg_lut.
> >>>>>
> >>>>> The below is a hack that shows/resolves the issue, but some
> >>>>> refactoring of the original patches might be in order.
> >>>>>
> >>>>> /
> >>>>>     Leif
> >>>>
> >>>> Leif,
> >>>>
> >>>> Sorry for the inconvenience. I do not have idea of early console till
> >>>> now and I always have debug console for early panic debug. Learned
> >>>> more from this issue.
> >>>>
> >>>> Suppose Peter's patch will resolve your issue.
> >>>
> >>> [+ Greg KH]
> >>>
> >>> So -next has now been broken for a while on a number of ARM platforms
> >>> because of this (they simply cannot boot), and no progress has been made
> >>> towards resolving this problem.
> >>>
> >>> Can we please drop this series (at least commits 7b753f3 and following)
> >>> from -next until is has been reworked and reviewed?
> >>
> >> I don't have any patches in my -next tree, everything is in Linus's tree
> >> now.  So if I've missed something, or need to revert something, please
> >> let me know specifcally what to do.
> >
> > Gahhh... Given that there is no obvious fix, that the discussion has
> > stalled and that the author of the series is apparently away, the
> > following patches should be reverted:
> 
> Marc,
> 
> There had a patch from Peter that revert early console part, which I
> thought will be merged to mainline. It's my fault for not fix the bug
> on time. Also sorry for late response to you as I took three days
> leave.
> 
> Could you help test attached patch? Thank you in advance!
> 
> 
> Greg,
> 
> Would you please hold the merging of revert patches for one or two
> days so that the fix can be verified? Thank you!

Given that this took way more than a few days, Linus now has the reverts
in his tree.  Please feel free to resend the series, in a form that does
not break people's machines, for inclusion in 4.4-rc1.

thanks,

greg k-h