[PATCH linux-next] usb: gadget: atmel_usba_udc: add ep capabilities support on device tree binding

[Sylvain Rochet]

The recently added endpoint capabilities flags verification breaks Atmel
USBA because the endpoint configuration was only added when the driver
is bound using the legacy pdata interface.

Convert endpoint configuration to new capabilities model when driver is
bound to a device tree as well.

Signed-off-by: Sylvain Rochet <sylvain.rochet at finsecur.com>
---
 drivers/usb/gadget/udc/atmel_usba_udc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 2cbbb46..c2ea5e1 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -2002,6 +2002,17 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
 		ep->udc = udc;
 		INIT_LIST_HEAD(&ep->queue);
 
+		if (ep->index == 0) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = ep->can_isoc;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+
+		ep->ep.caps.dir_in = true;
+		ep->ep.caps.dir_out = true;
+
 		if (i)
 			list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
 
-- 
2.5.1