[PATCH v2 6/8] arm/arm64: KVM: Add forwarded physical interrupts documentation

[Marc Zyngier]

On 07/09/15 17:45, Eric Auger wrote:
> Hi Christoffer,
> On 09/04/2015 09:40 PM, Christoffer Dall wrote:
>> Forwarded physical interrupts on arm/arm64 is a tricky concept and the
>> way we deal with them is not apparently easy to understand by reading
>> various specs.
>>
>> Therefore, add a proper documentation file explaining the flow and
>> rationale of the behavior of the vgic.
>>
>> Some of this text was contributed by Marc Zyngier and edited by me.
>> Omissions and errors are all mine.
>>
>> Signed-off-by: Christoffer Dall <christoffer.dall at linaro.org>
>> ---
>>  Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt | 181 +++++++++++++++++++++
>>  1 file changed, 181 insertions(+)
>>  create mode 100644 Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt
>>
>> diff --git a/Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt b/Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt
>> new file mode 100644
>> index 0000000..24b6f28
>> --- /dev/null
>> +++ b/Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt
>> @@ -0,0 +1,181 @@
>> +KVM/ARM VGIC Forwarded Physical Interrupts
>> +==========================================

[...]

>> +1.  KVM runs the VCPU
>> +2.  The guest programs the time to fire in T+100
>> +4.  At T+100 the timer fires and a physical IRQ causes the VM to exit
>> +5.  With interrupts disabled on the CPU, KVM looks at the timer state
>> +    and injects a forwarded physical interrupt because it concludes the
>> +    timer has expired.
> I don't get how we can trap without the virtual timer PPI handler being
> entered on host side. Please can you elaborate on this?

On VM exit, we disable the virtual timer (see the code in
hyp.S::save_timer_state where we clear the enable bit). We still perform
the exit, but the cause for exit is now gone, and the handler will never
fire.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...