[4.1.3-rt3] [report][suspend to ram] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
Grygorii Strashko
grygorii.strashko at ti.com
Fri Sep 4 09:46:51 PDT 2015
Hi All,
On 08/17/2015 06:46 PM, Grygorii Strashko wrote:
> On 08/16/2015 02:42 PM, Sebastian Andrzej Siewior wrote:
>> * Grygorii Strashko | 2015-08-12 21:25:50 [+0300]:
>>>
>>> I can constantly see below error report with RT-kernel on TI ARM dra7-evm
>>> if I'm trying to do Suspend to RAM.
>>
>> do you see the same problem on x86 with -RT?
>
> Unfortunately, I'm not working with x86 now, and I'm not sure I'll be able
> to try it in the nearest future.
>
> Below, I've tried to analyze involved code path and it seems expected
> to call clear_tasks_mm_cpumask() in atomic context, as the whole
> take_cpu_down() call chain expected to be atomic.
>
>>
>>> Disabling non-boot CPUs ...
>>> PM: noirq suspend of devices complete after 7.295 msecs
>>> [ 100.285729] Disabling non-boot CPUs ...
>>> [ 100.287575] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
>>> [ 100.287580] in_atomic(): 1, irqs_disabled(): 128, pid: 18, name: migration/1
>>> [ 100.287583] INFO: lockdep is turned off.
>>> [ 100.287586] irq event stamp: 122
>>> [ 100.287600] hardirqs last enabled at (121): [<c06ac0ac>] _raw_spin_unlock_irqrestore+0x88/0x90
>>> [ 100.287609] hardirqs last disabled at (122): [<c06abed0>] _raw_spin_lock_irq+0x28/0x5c
>>> [ 100.287620] softirqs last enabled at (0): [<c003d294>] copy_process.part.52+0x410/0x19d8
>>> [ 100.287625] softirqs last disabled at (0): [< (null)>] (null)
>>> [ 100.287630] Preemption disabled at:[< (null)>] (null)
>>> [ 100.287631]
>>> [ 100.287639] CPU: 1 PID: 18 Comm: migration/1 Tainted: G W 4.1.4-rt3-01046-g96ac8da #204
>>> [ 100.287642] Hardware name: Generic DRA74X (Flattened Device Tree)
>>> [ 100.287659] [<c0019134>] (unwind_backtrace) from [<c0014774>] (show_stack+0x20/0x24)
>>> [ 100.287671] [<c0014774>] (show_stack) from [<c06a70f4>] (dump_stack+0x88/0xdc)
>>> [ 100.287681] [<c06a70f4>] (dump_stack) from [<c006cab8>] (___might_sleep+0x198/0x2a8)
>>> [ 100.287689] [<c006cab8>] (___might_sleep) from [<c06ac4dc>] (rt_spin_lock+0x30/0x70)
>>> [ 100.287699] [<c06ac4dc>] (rt_spin_lock) from [<c013f790>] (find_lock_task_mm+0x9c/0x174)
>>
>> this is task_lock() which takes a sleeping lock.
>>
>>> [ 100.287710] [<c013f790>] (find_lock_task_mm) from [<c00409ac>] (clear_tasks_mm_cpumask+0xb4/0x1ac)
>>> [ 100.287720] [<c00409ac>] (clear_tasks_mm_cpumask) from [<c00166a4>] (__cpu_disable+0x98/0xbc)
>>> [ 100.287728] [<c00166a4>] (__cpu_disable) from [<c06a2e8c>] (take_cpu_down+0x1c/0x50)
>>> [ 100.287742] [<c06a2e8c>] (take_cpu_down) from [<c00f2600>] (multi_cpu_stop+0x11c/0x158)
>>> [ 100.287754] [<c00f2600>] (multi_cpu_stop) from [<c00f2a9c>] (cpu_stopper_thread+0xc4/0x184)
>>
>> this function contains local_save_flags().
>
> multi_cpu_stop:
> local_save_flags(flags);
>
> if (!msdata->active_cpus)
> is_active = cpu == cpumask_first(cpu_online_mask);
> else
> is_active = cpumask_test_cpu(cpu, msdata->active_cpus);
>
> /* Simple state machine */
> do {
> /* Chill out and ensure we re-read multi_stop_state. */
> cpu_relax();
> if (msdata->state != curstate) {
> curstate = msdata->state;
> switch (curstate) {
> case MULTI_STOP_DISABLE_IRQ:
> local_irq_disable();
> hard_irq_disable(); <==== Step 2 disable IRQs
> break;
> case MULTI_STOP_RUN:
> if (is_active)
> err = msdata->fn(msdata->data); ===> Step 3 take_cpu_down()
> break;
> default:
> break;
> }
> ack_state(msdata);
> }
> } while (curstate != MULTI_STOP_EXIT);
>
> local_irq_restore(flags);
>
>>
>>> [ 100.287767] [<c00f2a9c>] (cpu_stopper_thread) from [<c0069058>] (smpboot_thread_fn+0x18c/0x324)
>
> cpu_stopper_thread:
> preempt_disable();
>
> ret = fn(arg); ===> multi_cpu_stop()
> if (ret)
> done->ret = ret;
>
> preempt_enable();
>
>
>>> [ 100.287779] [<c0069058>] (smpboot_thread_fn) from [<c00649c4>] (kthread+0xe8/0x104)
>>> [ 100.287791] [<c00649c4>] (kthread) from [<c0010058>] (ret_from_fork+0x14/0x3c)
>>> [ 100.288114] CPU1: shutdown
>>
>> The local_save_flags() should be probably replaced with something else.
>>
>
> Below is list of clear_tasks_mm_cpumask() users:
> arch/arm/kernel/smp.c
> int __cpu_disable(void)
> 216: clear_tasks_mm_cpumask(cpu);
> arch/arm64/kernel/smp.c
> int __cpu_disable(void)
> 238: clear_tasks_mm_cpumask(cpu);
> arch/metag/kernel/smp.c
> int __cpu_disable(void)
> 290: clear_tasks_mm_cpumask(cpu);
>
> arch/powerpc/mm/mmu_context_nohash.c
> _cpu_down()
> + cpu_notify_nofail(CPU_DEAD | mod, hcpu);
> + mmu_context_cpu_notify()
> 400: clear_tasks_mm_cpumask(cpu);
>
> arch/sh/kernel/smp.c
> int __cpu_disable(void)
> 155: clear_tasks_mm_cpumask(cpu);
> arch/xtensa/kernel/smp.c
> int __cpu_disable(void)
> 279: clear_tasks_mm_cpumask(cpu);
>
> As per above, in all case, except *powerpc*, the clear_tasks_mm_cpumask()
> is called from __cpu_disable() (atomic context).
> While in powerpc case it's called from _cpu_down() (if I understand right,
> in non-atomic context).
>
Below diff fixes issue for me. More over, with this change I can do
CPU1 plug/unplug many times and suspend/resume works much more stable
(before it stuck some times after "Disabling non-boot CPUs ...").
I'd very appreciated for comments.
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 3d6b782..20b5741 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -215,8 +215,6 @@ int __cpu_disable(void)
flush_cache_louis();
local_flush_tlb_all();
- clear_tasks_mm_cpumask(cpu);
-
return 0;
}
@@ -232,6 +230,8 @@ void __cpu_die(unsigned int cpu)
pr_err("CPU%u: cpu didn't die\n", cpu);
return;
}
+ clear_tasks_mm_cpumask(cpu);
+
pr_notice("CPU%u: shutdown\n", cpu);
/*
--
regards,
-grygorii
More information about the linux-arm-kernel
mailing list