[PATCH 2/2] arm64: dts: mt8173: Add thermal zone node for mt8173.

[Dawei Chien]

Add thermal zone node to mt8173.dtsi.

Signed-off-by: Dawei Chien <dawei.chien at mediatek.com>
---
This patch is base on following patches
https://patchwork.kernel.org/patch/6969581/
https://patchwork.kernel.org/patch/6969571/
https://patchwork.kernel.org/patch/6969381/
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi |   44 ++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 208051a..6493bfd 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -17,6 +17,7 @@
 #include <dt-bindings/power/mt8173-power.h>
 #include <dt-bindings/reset-controller/mt8173-resets.h>
 #include "mt8173-pinfunc.h"
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "mediatek,mt8173";
@@ -116,6 +117,49 @@
 		clock-output-names = "clk32k";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu_thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&thermal MT8173_THERMAL_ZONE_CA57>;
+			sustainable-power = <1500>;
+
+			trips {
+				threshold: trip-point at 0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point at 1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit at 0 {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map at 0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 0 0>;
+					contribution = <1024>;
+				};
+				map at 1 {
+					trip = <&target>;
+					cooling-device = <&cpu2 0 0>;
+					contribution = <2048>;
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
-- 
1.7.9.5