[PATCHv4 2/5] net: phy: extend fixed driver with fixed_phy_register()

[Florian Fainelli]

On 03/09/15 12:20, Sergei Shtylyov wrote:
> Hello.
> 
> On 05/16/2014 06:14 PM, Thomas Petazzoni wrote:
> 
>> The existing fixed_phy_add() function has several drawbacks that
>> prevents it from being used as is for OF-based declaration of fixed
>> PHYs:
>>
>>   * The address of the PHY on the fake bus needs to be passed, while a
>>     dynamic allocation is desired.
>>
>>   * Since the phy_device instantiation is post-poned until the next
>>     mdiobus scan, there is no way to associate the fixed PHY with its
>>     OF node, which later prevents of_phy_connect() from finding this
>>     fixed PHY from a given OF node.
>>
>> To solve this, this commit introduces fixed_phy_register(), which will
>> allocate an available PHY address, add the PHY using fixed_phy_add()
>> and instantiate the phy_device structure associated with the provided
>> OF node.
>>
>> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
>> Acked-by: Florian Fainelli <f.fainelli at gmail.com>
>> Acked-by: Grant Likely <grant.likely at linaro.org>
>> ---
>>   drivers/net/phy/fixed.c   | 61
>> +++++++++++++++++++++++++++++++++++++++++++++++
>>   include/linux/phy_fixed.h | 11 +++++++++
>>   2 files changed, 72 insertions(+)
>>
>> diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
>> index e41546d..d60d875 100644
>> --- a/drivers/net/phy/fixed.c
>> +++ b/drivers/net/phy/fixed.c
> [...]
>> @@ -203,6 +204,66 @@ err_regs:
> [...]
>> +int fixed_phy_register(unsigned int irq,
>> +               struct fixed_phy_status *status,
>> +               struct device_node *np)
>> +{
>> +    struct fixed_mdio_bus *fmb = &platform_fmb;
>> +    struct phy_device *phy;
>> +    int phy_addr;
>> +    int ret;
>> +
>> +    /* Get the next available PHY address, up to PHY_MAX_ADDR */
>> +    spin_lock(&phy_fixed_addr_lock);
>> +    if (phy_fixed_addr == PHY_MAX_ADDR) {
>> +        spin_unlock(&phy_fixed_addr_lock);
>> +        return -ENOSPC;
>> +    }
>> +    phy_addr = phy_fixed_addr++;
>> +    spin_unlock(&phy_fixed_addr_lock);
>> +
>> +    ret = fixed_phy_add(PHY_POLL, phy_addr, status);
> 
>    Was rummaging in the fixed_phy driver and a bug sprang right at me:
> 'phy' should have been passed here, not PHY_POLL. Luckily, all callers
> pass PHY_POLL anyway...

Are we looking at the same header file for the prototype of fixed_phy_add()?

extern int fixed_phy_add(unsigned int irq, int phy_id,
                         struct fixed_phy_status *status,
                         int link_gpio);

First argument is correct here.. at any rate, if something needs fixing,
just go ahead and submit a patch.
--
Florian