earlycon issues in -next with amba-pl011 updates

Peter Hurley peter at hurleysoftware.com
Thu Sep 3 10:49:02 PDT 2015


On 09/03/2015 12:08 PM, Marc Zyngier wrote:
> On 03/09/15 16:52, Greg Kroah-Hartman wrote:
>> On Thu, Sep 03, 2015 at 11:23:15AM +0100, Marc Zyngier wrote:
>>> On 11/08/15 02:48, Jun Nie wrote:
>>>> 2015-08-11 7:23 GMT+08:00 Leif Lindholm <leif.lindholm at linaro.org>:
>>>>> Hi all,
>>>>>
>>>>> The kernelci.org bot picked up a complete boot failure (no output past
>>>>> UEFI stub) with next-20150806 and Tyler bisected it down to somewhere
>>>>> in
>>>>> 8cd90e5 uart: pl011: Add support to ZTE ZX296702 uart
>>>>> 09dcc7d uart: pl011: Improve LCRH register access decision
>>>>> 2c096a9 uart: pl011: Introduce register look up table
>>>>> 7b753f3 uart: pl011: Introduce register accessor
>>>>>
>>>>> The issue only appears with earlycon on command line, for pl011
>>>>> consoles.
>>>>>
>>>>> Some investigation shows that the cause lies with
>>>>> commit 7b753f318d14 ("uart: pl011: Introduce register accessor")
>>>>> and
>>>>> commit 2c096a9eedc6 ("uart: pl011: Introduce register look up table")
>>>>>
>>>>> Specifically, the changes to pl011_putc() are incorrect:
>>>>> The new pl011_ accessors take a (struct uart_amba_port *) input, but
>>>>> pl011_putc() directly uses the incoming (struct uart_port *) for this.
>>>>>
>>>>> Apart from ending up with an unintended/incorrect UART base address,
>>>>> the introduction of the lookup table for register offsets also means
>>>>> the accessors try to dereference (struct uart_amba_port *)->reg_lut.
>>>>>
>>>>> The below is a hack that shows/resolves the issue, but some
>>>>> refactoring of the original patches might be in order.
>>>>>
>>>>> /
>>>>>     Leif
>>>>
>>>> Leif,
>>>>
>>>> Sorry for the inconvenience. I do not have idea of early console till
>>>> now and I always have debug console for early panic debug. Learned
>>>> more from this issue.
>>>>
>>>> Suppose Peter's patch will resolve your issue.
>>>
>>> [+ Greg KH]
>>>
>>> So -next has now been broken for a while on a number of ARM platforms
>>> because of this (they simply cannot boot), and no progress has been made
>>> towards resolving this problem.
>>>
>>> Can we please drop this series (at least commits 7b753f3 and following)
>>> from -next until is has been reworked and reviewed?
>>
>> I don't have any patches in my -next tree, everything is in Linus's tree
>> now.  So if I've missed something, or need to revert something, please
>> let me know specifcally what to do.
> 
> Gahhh... Given that there is no obvious fix

Fix has been on list since Aug 10.

http://www.spinics.net/lists/linux-serial/msg18576.html


> that the discussion has
> stalled and that the author of the series is apparently away, the
> following patches should be reverted:
> 
> 8cd90e50d140 uart: pl011: Add support to ZTE ZX296702 uart
> 09dcc7dfc05b uart: pl011: Improve LCRH register access decision
> 2c096a9eedc6 uart: pl011: Introduce register look up table
> 7b753f318d14 uart: pl011: Introduce register accessor
> 534e14e2293d uart: pl011: Rename regs with enumeration
> 
> (7b753f318d14 being the one breaking everything, but it makes more sense
> to revert the whole series until it is properly fixed and reviewed).
> 
> Thanks,
> 
> 	M.
> 




More information about the linux-arm-kernel mailing list