earlycon issues in -next with amba-pl011 updates

[Greg Kroah-Hartman]

On Thu, Sep 03, 2015 at 11:23:15AM +0100, Marc Zyngier wrote:
> On 11/08/15 02:48, Jun Nie wrote:
> > 2015-08-11 7:23 GMT+08:00 Leif Lindholm <leif.lindholm at linaro.org>:
> >> Hi all,
> >>
> >> The kernelci.org bot picked up a complete boot failure (no output past
> >> UEFI stub) with next-20150806 and Tyler bisected it down to somewhere
> >> in
> >> 8cd90e5 uart: pl011: Add support to ZTE ZX296702 uart
> >> 09dcc7d uart: pl011: Improve LCRH register access decision
> >> 2c096a9 uart: pl011: Introduce register look up table
> >> 7b753f3 uart: pl011: Introduce register accessor
> >>
> >> The issue only appears with earlycon on command line, for pl011
> >> consoles.
> >>
> >> Some investigation shows that the cause lies with
> >> commit 7b753f318d14 ("uart: pl011: Introduce register accessor")
> >> and
> >> commit 2c096a9eedc6 ("uart: pl011: Introduce register look up table")
> >>
> >> Specifically, the changes to pl011_putc() are incorrect:
> >> The new pl011_ accessors take a (struct uart_amba_port *) input, but
> >> pl011_putc() directly uses the incoming (struct uart_port *) for this.
> >>
> >> Apart from ending up with an unintended/incorrect UART base address,
> >> the introduction of the lookup table for register offsets also means
> >> the accessors try to dereference (struct uart_amba_port *)->reg_lut.
> >>
> >> The below is a hack that shows/resolves the issue, but some
> >> refactoring of the original patches might be in order.
> >>
> >> /
> >>     Leif
> > 
> > Leif,
> > 
> > Sorry for the inconvenience. I do not have idea of early console till
> > now and I always have debug console for early panic debug. Learned
> > more from this issue.
> > 
> > Suppose Peter's patch will resolve your issue.
> 
> [+ Greg KH]
> 
> So -next has now been broken for a while on a number of ARM platforms
> because of this (they simply cannot boot), and no progress has been made
> towards resolving this problem.
> 
> Can we please drop this series (at least commits 7b753f3 and following)
> from -next until is has been reworked and reviewed?

I don't have any patches in my -next tree, everything is in Linus's tree
now.  So if I've missed something, or need to revert something, please
let me know specifcally what to do.

thanks,

greg k-h