[PATCH] ARM/ARM64: KVM: remove 'config KVM_ARM_MAX_VCPUS'

Wed Sep 2 03:25:55 PDT 2015

On Wed, Sep 02, 2015 at 02:31:21PM +0800, Ming Lei wrote:
> This patch removes config option of KVM_ARM_MAX_VCPUS,
> and like other ARCHs, just choose the maximum allowed
> value from hardware, and follows the reasons:
> 
> 1) from distribution view, the option has to be
> defined as the max allowed value because it need to
> meet all kinds of virtulization applications and
> need to support most of SoCs;
> 
> 2) using a bigger value doesn't introduce extra memory
> consumption, and the help text in Kconfig isn't accurate
> because kvm_vpu structure isn't allocated until request
> of creating VCPU is sent from QEMU;

This used to be true because of the vgic bitmaps, but that is now
dynamically allocated, so I believe you're correct in saying that the
text is no longer accurate.

> 
> 3) the main effect is that the field of vcpus[] in 'struct kvm'
> becomes a bit bigger(sizeof(void *) per vcpu) and need more cache
> lines to hold the structure, but 'struct kvm' is one generic struct,
> and it has worked well on other ARCHs already in this way. Also,
> the world switch frequecy is often low, for example, it is ~2000
> when running kernel building load in VM from APM xgene KVM host,
> so the effect is very small, and the difference can't be observed
> in my test at all.

While I'm not prinicipally opposed to removing this option, I have to
point out that this analysis is far far over-simplified.  You have
chosen a workload which excercised only CPU and memory virtualization,
mostly solved by the hardware virtualization support, and therefore you
don't see many exits.

Try running an I/O bound workload, or something which involves a lot of
virtual IPIs, and you'll see a higher number of exits.

However, I still doubt that the effects will be noticable in the grand
scheme of things.

> 
> Cc: Dann Frazier <dann.frazier at canonical.com>
> Cc: Christoffer Dall <christoffer.dall at linaro.org>
> Cc: Marc Zyngier <marc.zyngier at arm.com>
> Cc: kvmarm at lists.cs.columbia.edu
> Cc: kvm at vger.kernel.org
> Signed-off-by: Ming Lei <ming.lei at canonical.com>
> ---
>  arch/arm/include/asm/kvm_host.h   |  8 ++------
>  arch/arm/kvm/Kconfig              | 11 -----------
>  arch/arm64/include/asm/kvm_host.h |  8 ++------
>  arch/arm64/kvm/Kconfig            | 11 -----------
>  include/kvm/arm_vgic.h            |  6 +-----
>  virt/kvm/arm/vgic-v3.c            |  2 +-
>  6 files changed, 6 insertions(+), 40 deletions(-)
> 
> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
> index dcba0fa..c8c226a 100644
> --- a/arch/arm/include/asm/kvm_host.h
> +++ b/arch/arm/include/asm/kvm_host.h
> @@ -29,12 +29,6 @@
>  
>  #define __KVM_HAVE_ARCH_INTC_INITIALIZED
>  
> -#if defined(CONFIG_KVM_ARM_MAX_VCPUS)
> -#define KVM_MAX_VCPUS CONFIG_KVM_ARM_MAX_VCPUS
> -#else
> -#define KVM_MAX_VCPUS 0
> -#endif
> -
>  #define KVM_USER_MEM_SLOTS 32
>  #define KVM_PRIVATE_MEM_SLOTS 4
>  #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
> @@ -44,6 +38,8 @@
>  
>  #include <kvm/arm_vgic.h>
>  
> +#define KVM_MAX_VCPUS VGIC_V2_MAX_CPUS
> +
>  u32 *kvm_vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num, u32 mode);
>  int __attribute_const__ kvm_target_cpu(void);
>  int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
> diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig
> index bfb915d..210ecca 100644
> --- a/arch/arm/kvm/Kconfig
> +++ b/arch/arm/kvm/Kconfig
> @@ -45,15 +45,4 @@ config KVM_ARM_HOST
>  	---help---
>  	  Provides host support for ARM processors.
>  
> -config KVM_ARM_MAX_VCPUS
> -	int "Number maximum supported virtual CPUs per VM"
> -	depends on KVM_ARM_HOST
> -	default 4
> -	help
> -	  Static number of max supported virtual CPUs per VM.
> -
> -	  If you choose a high number, the vcpu structures will be quite
> -	  large, so only choose a reasonable number that you expect to
> -	  actually use.
> -
>  endif # VIRTUALIZATION
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index 415938d..3fb58ea 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -30,12 +30,6 @@
>  
>  #define __KVM_HAVE_ARCH_INTC_INITIALIZED
>  
> -#if defined(CONFIG_KVM_ARM_MAX_VCPUS)
> -#define KVM_MAX_VCPUS CONFIG_KVM_ARM_MAX_VCPUS
> -#else
> -#define KVM_MAX_VCPUS 0
> -#endif
> -
>  #define KVM_USER_MEM_SLOTS 32
>  #define KVM_PRIVATE_MEM_SLOTS 4
>  #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
> @@ -43,6 +37,8 @@
>  #include <kvm/arm_vgic.h>
>  #include <kvm/arm_arch_timer.h>
>  
> +#define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS
> +
>  #define KVM_VCPU_MAX_FEATURES 3
>  
>  int __attribute_const__ kvm_target_cpu(void);
> diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
> index bfffe8f..5c7e920 100644
> --- a/arch/arm64/kvm/Kconfig
> +++ b/arch/arm64/kvm/Kconfig
> @@ -41,15 +41,4 @@ config KVM_ARM_HOST
>  	---help---
>  	  Provides host support for ARM processors.
>  
> -config KVM_ARM_MAX_VCPUS
> -	int "Number maximum supported virtual CPUs per VM"
> -	depends on KVM_ARM_HOST
> -	default 4
> -	help
> -	  Static number of max supported virtual CPUs per VM.
> -
> -	  If you choose a high number, the vcpu structures will be quite
> -	  large, so only choose a reasonable number that you expect to
> -	  actually use.
> -
>  endif # VIRTUALIZATION
> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
> index d901f1a..4e14dac 100644
> --- a/include/kvm/arm_vgic.h
> +++ b/include/kvm/arm_vgic.h
> @@ -35,11 +35,7 @@
>  #define VGIC_V3_MAX_LRS		16
>  #define VGIC_MAX_IRQS		1024
>  #define VGIC_V2_MAX_CPUS	8
> -
> -/* Sanity checks... */
> -#if (KVM_MAX_VCPUS > 255)
> -#error Too many KVM VCPUs, the VGIC only supports up to 255 VCPUs for now
> -#endif
> +#define VGIC_V3_MAX_CPUS	255
>  
>  #if (VGIC_NR_IRQS_LEGACY & 31)
>  #error "VGIC_NR_IRQS must be a multiple of 32"
> diff --git a/virt/kvm/arm/vgic-v3.c b/virt/kvm/arm/vgic-v3.c
> index afbf925..7dd5d62 100644
> --- a/virt/kvm/arm/vgic-v3.c
> +++ b/virt/kvm/arm/vgic-v3.c
> @@ -288,7 +288,7 @@ int vgic_v3_probe(struct device_node *vgic_node,
>  
>  	vgic->vctrl_base = NULL;
>  	vgic->type = VGIC_V3;
> -	vgic->max_gic_vcpus = KVM_MAX_VCPUS;
> +	vgic->max_gic_vcpus = VGIC_V3_MAX_CPUS;
>  
>  	kvm_info("%s@%llx IRQ%d\n", vgic_node->name,
>  		 vcpu_res.start, vgic->maint_irq);
> -- 
> 1.9.1

Reviewed-by: Christoffer Dall <christoffer.dall at linaro.org>