driver core: correct device's shutdown order
Rhyland Klein
rklein at nvidia.com
Tue Sep 1 15:33:49 PDT 2015
On 7/27/2015 1:43 PM, Strashko, Grygorii wrote:
> Now device's shutdown sequence is performed in reverse order of their
> registration in devices_kset list and this sequence corresponds to the
> reverse device's creation order. So, devices_kset data tracks
> "parent<-child" device's dependencies only.
>
> Unfortunately, that's not enough and causes problems in case of
> implementing board's specific shutdown procedures. For example [1]:
> "DRA7XX_evm uses PCF8575 and one of the PCF output lines feeds to
> MMC/SD and this line should be driven high in order for the MMC/SD to
> be detected. This line is modelled as regulator and the hsmmc driver
> takes care of enabling and disabling it. In the case of 'reboot',
> during shutdown path as part of it's cleanup process the hsmmc driver
> disables this regulator. This makes MMC boot not functional."
>
> To handle this issue the .shutdown() callback could be implemented
> for PCF8575 device where corresponding GPIO pins will be configured to
> states, required for correct warm/cold reset. This can be achieved
> only when all .shutdown() callbacks have been called already for all
> PCF8575's consumers. But devices_kset is not filled correctly now:
>
> devices_kset: Device61 4e000000.dmm
> devices_kset: Device62 48070000.i2c
> devices_kset: Device63 48072000.i2c
> devices_kset: Device64 48060000.i2c
> devices_kset: Device65 4809c000.mmc
> ...
> devices_kset: Device102 fixedregulator-sd
> ...
> devices_kset: Device181 0-0020 // PCF8575
> devices_kset: Device182 gpiochip496
> devices_kset: Device183 0-0021 // PCF8575
> devices_kset: Device184 gpiochip480
>
> As can be seen from above .shutdown() callback for PCF8575 will be called
> before its consumers, which, in turn means, that any changes of PCF8575
> GPIO's pins will be or unsafe or overwritten later by GPIO's consumers.
> The problem can be solved if devices_kset list will be filled not only
> according device creation order, but also according device's probing
> order to track "supplier<-consumer" dependencies also.
>
> Hence, as a fix, lets add devices_kset_move_last(),
> devices_kset_move_before(), devices_kset_move_after() and call them
> from device_move() and also add call of devices_kset_move_last() in
> really_probe(). After this change all entries in devices_kset will
> be sorted according to device's creation ("parent<-child") and
> probing ("supplier<-consumer") order.
>
> devices_kset after:
> devices_kset: Device121 48070000.i2c
> devices_kset: Device122 i2c-0
> ...
> devices_kset: Device147 regulator.24
> devices_kset: Device148 0-0020
> devices_kset: Device149 gpiochip496
> devices_kset: Device150 0-0021
> devices_kset: Device151 gpiochip480
> devices_kset: Device152 0-0019
> ...
> devices_kset: Device372 fixedregulator-sd
> devices_kset: Device373 regulator.29
> devices_kset: Device374 4809c000.mmc
> devices_kset: Device375 mmc0
>
> [1] http://www.spinics.net/lists/linux-mmc/msg29825.html
>
> Cc: Sekhar Nori <nsekhar at ti.com>
> Signed-off-by: Grygorii Strashko <grygorii.strashko at ti.com>
>
> ---
> drivers/base/base.h | 1 +
> drivers/base/core.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/base/dd.c | 8 ++++++++
> 3 files changed, 58 insertions(+)
>
> diff --git a/drivers/base/base.h b/drivers/base/base.h
> index fd3347d..8c5eb73 100644
> --- a/drivers/base/base.h
> +++ b/drivers/base/base.h
> @@ -134,6 +134,7 @@ extern int devres_release_all(struct device *dev);
>
> /* /sys/devices directory */
> extern struct kset *devices_kset;
> +extern void devices_kset_move_last(struct device *dev);
>
> #if defined(CONFIG_MODULES) && defined(CONFIG_SYSFS)
> extern void module_add_driver(struct module *mod, struct device_driver *drv);
> diff --git a/drivers/base/core.c b/drivers/base/core.c
> index dafae6d..fc5a558 100644
> --- a/drivers/base/core.c
> +++ b/drivers/base/core.c
> @@ -534,6 +534,52 @@ static DEVICE_ATTR_RO(dev);
> struct kset *devices_kset;
>
> /**
> + * devices_kset_move_before - Move device in the devices_kset's list.
> + * @deva: Device to move.
> + * @devb: Device @deva should come before.
> + */
> +static void devices_kset_move_before(struct device *deva, struct device *devb)
> +{
> + if (!devices_kset)
> + return;
> + pr_debug("devices_kset: Moving %s before %s\n",
> + dev_name(deva), dev_name(devb));
> + spin_lock(&devices_kset->list_lock);
> + list_move_tail(&deva->kobj.entry, &devb->kobj.entry);
> + spin_unlock(&devices_kset->list_lock);
> +}
> +
> +/**
> + * devices_kset_move_after - Move device in the devices_kset's list.
> + * @deva: Device to move
> + * @devb: Device @deva should come after.
> + */
> +static void devices_kset_move_after(struct device *deva, struct device *devb)
> +{
> + if (!devices_kset)
> + return;
> + pr_debug("devices_kset: Moving %s after %s\n",
> + dev_name(deva), dev_name(devb));
> + spin_lock(&devices_kset->list_lock);
> + list_move(&deva->kobj.entry, &devb->kobj.entry);
> + spin_unlock(&devices_kset->list_lock);
> +}
> +
> +/**
> + * devices_kset_move_last - move the device to the end of devices_kset's list.
> + * @dev: device to move
> + */
> +void devices_kset_move_last(struct device *dev)
> +{
> + if (!devices_kset)
> + return;
> + pr_debug("devices_kset: Moving %s to end of list\n", dev_name(dev));
> + spin_lock(&devices_kset->list_lock);
> + list_move_tail(&dev->kobj.entry, &devices_kset->list);
> + spin_unlock(&devices_kset->list_lock);
> +}
> +
> +/**
> * device_create_file - create sysfs attribute file for device.
> * @dev: device.
> * @attr: device attribute descriptor.
> @@ -1923,12 +1969,15 @@ int device_move(struct device *dev, struct device *new_parent,
> break;
> case DPM_ORDER_DEV_AFTER_PARENT:
> device_pm_move_after(dev, new_parent);
> + devices_kset_move_after(dev, new_parent);
> break;
> case DPM_ORDER_PARENT_BEFORE_DEV:
> device_pm_move_before(new_parent, dev);
> + devices_kset_move_before(new_parent, dev);
> break;
> case DPM_ORDER_DEV_LAST:
> device_pm_move_last(dev);
> + devices_kset_move_last(dev);
> break;
> }
>
> diff --git a/drivers/base/dd.c b/drivers/base/dd.c
> index a638bbb..cc2b1d4 100644
> --- a/drivers/base/dd.c
> +++ b/drivers/base/dd.c
> @@ -304,6 +304,14 @@ static int really_probe(struct device *dev, struct device_driver *drv)
> goto probe_failed;
> }
>
> + /*
> + * Ensure devices are listed in devices_kset in correct order
> + * It's important to move Dev to the end of devices_kset before
> + * calling .probe, because it could be recursive and parent Dev
> + * should always go first
> + */
> + devices_kset_move_last(dev);
> +
> if (dev->bus->probe) {
> ret = dev->bus->probe(dev);
> if (ret)
>
I loaded this change up with an Arm64 booting kernel and verified that
some previously device drivers which were previously incorrectly ordered
are now properly ordered.
Reviewed-by: Rhyland Klein <rklein at nvidia.com>
Tested-by: Rhyland Klein <rklein at nvidia.com>
--
nvpublic
More information about the linux-arm-kernel
mailing list