[PATCH v4 2/5] ARM: NSP: add minimal Northstar Plus device tree
Ray Jui
rjui at broadcom.com
Tue Sep 1 08:28:01 PDT 2015
On 8/31/2015 4:48 PM, Jon Mason wrote:
> Add a very minimalistic set of Northstar Plus Device Tree files which
> describes the SoC and the BCM958625 implementation. The perpherials
> described are:
>
> ARM Cortex A9 CPU
> 2 8250 UARTs
> ARM GIC
> PL310 L2 Cache
> ARM A9 Global timer
>
> Signed-off-by: Kapil Hali <kapilh at broadcom.com>
> Signed-off-by: Jon Mason <jonmason at broadcom.com>
> ---
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/bcm-nsp.dtsi | 119 +++++++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/bcm958625k.dts | 57 +++++++++++++++++++
> 3 files changed, 178 insertions(+)
> create mode 100644 arch/arm/boot/dts/bcm-nsp.dtsi
> create mode 100644 arch/arm/boot/dts/bcm958625k.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 246473a..adb5732 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -82,6 +82,8 @@ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
> dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
> bcm28155-ap.dtb \
> bcm21664-garnet.dtb
> +dtb-$(CONFIG_ARCH_BCM_NSP) += \
> + bcm958625k.dtb
> dtb-$(CONFIG_ARCH_BERLIN) += \
> berlin2-sony-nsz-gs7.dtb \
> berlin2cd-google-chromecast.dtb \
> diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
> new file mode 100644
> index 0000000..58aca27
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm-nsp.dtsi
> @@ -0,0 +1,119 @@
> +/*
> + * BSD LICENSE
> + *
> + * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Broadcom Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +#include "skeleton.dtsi"
> +
> +/ {
> + compatible = "brcm,nsp";
> + model = "Broadcom Northstar Plus SoC";
> + interrupt-parent = <&gic>;
> +
> + mpcore {
> + compatible = "simple-bus";
> + ranges = <0x00000000 0x19020000 0x00003000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + next-level-cache = <&L2>;
> + reg = <0x0>;
> + };
> + };
> +
> + L2: l2-cache {
> + compatible = "arm,pl310-cache";
> + reg = <0x2000 0x1000>;
> + cache-unified;
> + cache-level = <2>;
> + };
> +
> + gic: interrupt-controller at 19021000 {
> + compatible = "arm,cortex-a9-gic";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0x1000 0x1000>,
> + <0x0100 0x100>;
> + };
> +
> + timer at 19020200 {
> + compatible = "arm,cortex-a9-global-timer";
> + reg = <0x0200 0x100>;
> + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&periph_clk>;
> + };
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + periph_clk: periph_clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <500000000>;
> + };
> + };
> +
> + axi {
> + compatible = "simple-bus";
> + ranges = <0x00000000 0x18000000 0x00001000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + uart0: serial at 18000300 {
> + compatible = "ns16550a";
> + reg = <0x0300 0x100>;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <62499840>;
> + status = "disabled";
> + };
> +
> + uart1: serial at 18000400 {
> + compatible = "ns16550a";
> + reg = <0x0400 0x100>;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <62499840>;
> + status = "disabled";
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
> new file mode 100644
> index 0000000..16303db
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm958625k.dts
> @@ -0,0 +1,57 @@
> +/*
> + * BSD LICENSE
> + *
> + * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Broadcom Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/dts-v1/;
> +
> +#include "bcm-nsp.dtsi"
> +
> +/ {
> + model = "NorthStar Plus SVK (BCM958625K)";
> + compatible = "brcm,bcm58625", "brcm,nsp";
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
>
Looks good to me!
Reviewed-by: Ray Jui <rjui at broadcom.com>
Thanks,
Ray
More information about the linux-arm-kernel
mailing list