[PATCH 1/4] arm64: dts: Reserve memory regions for hi6220

[Rob Herring]

On Fri, Oct 9, 2015 at 9:20 AM, Leo Yan <leo.yan at linaro.org> wrote:
> Hi Rob,
>
> On Fri, Oct 09, 2015 at 08:50:13AM -0500, Rob Herring wrote:
>> On Fri, Oct 9, 2015 at 8:30 AM, Mark Rutland <mark.rutland at arm.com> wrote:
>> > On Fri, Oct 09, 2015 at 08:17:16AM -0500, Rob Herring wrote:
>> >> On Thu, Oct 8, 2015 at 11:36 PM, Leo Yan <leo.yan at linaro.org> wrote:
>> >> > On Hi6220, below memory regions in DDR have specific purpose:
>> >> >
>> >> >   0x05e0,0000 - 0x05ef,ffff: For MCU firmware using at runtime;
>> >> >   0x06df,f000 - 0x06df,ffff: For mailbox message data;
>> >> >   0x0740,f000 - 0x0740,ffff: For MCU firmware's section;
>> >> >   0x3e00,0000 - 0x3fff,ffff: For OP-TEE.
>> >> >
>> >> > This patch reserves these memory regions in DT.
>> >> >
>> >> > Signed-off-by: Leo Yan <leo.yan at linaro.org>
>> >> > ---
>> >> >  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 16 ++++++++++++----
>> >> >  1 file changed, 12 insertions(+), 4 deletions(-)
>> >> >
>> >> > diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
>> >> > index e36a539..e3f4cb3 100644
>> >> > --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
>> >> > +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
>> >> > @@ -7,9 +7,6 @@
>> >> >
>> >> >  /dts-v1/;
>> >> >
>> >> > -/*Reserved 1MB memory for MCU*/
>> >> > -/memreserve/ 0x05e00000 0x00100000;
>> >> > -
>> >>
>> >> Why does memreserve not work for you? You can have multiple entries.
>> >>
>> >> >  #include "hi6220.dtsi"
>> >> >
>> >> >  / {
>> >> > @@ -24,8 +21,19 @@
>> >> >                 stdout-path = "serial0:115200n8";
>> >> >         };
>> >> >
>> >> > +       /*
>> >> > +        * Reserve below regions from memory node:
>> >> > +        *
>> >> > +        *  - 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
>> >> > +        *  - 0x06df,f000 - 0x06df,ffff: Mailbox message data
>> >> > +        *  - 0x0740,f000 - 0x0740,ffff: MCU firmware section
>> >> > +        *  - 0x3e00,0000 - 0x3fff,ffff: OP-TEE
>> >> > +        */
>> >> >         memory at 0 {
>> >> >                 device_type = "memory";
>> >> > -               reg = <0x0 0x0 0x0 0x40000000>;
>> >> > +               reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
>> >> > +                     <0x00000000 0x05f00000 0x00000000 0x00eff000>,
>> >> > +                     <0x00000000 0x06e00000 0x00000000 0x0060f000>,
>> >> > +                     <0x00000000 0x07410000 0x00000000 0x36bf0000>;
>> >>
>> >> No, don't do this. Please use memreserve or reserved-memory binding[1]
>> >> or combination of both. Probably reserved-memory if you need the
>> >> kernel to access some of these regions.
>> >
>> > I disagree at least for those portions owned by the secure world. The
>> > kernel shouldn't map those at all, so memreserve isn't appropriate. That
>> > covers OP-TEE and the MCU firmware regions, and I'd expec the EFI memory
>> > map to not list those as available to the kernel.
>>
>> I'm fine carving out the beginning or end, but otherwise think memory
>> should correspond to the physical memory. We have a way to describe
>> holes to keep out, so we should use them. If secure world uses the DT,
>> then it would either want to know its region in memory or add the DT
>> data to say what it is using. We need that to be easy to find or easy
>> to set, respectively. The size secure world needs could vary as well.
>>
>> The fact that the kernel maps the memory is the kernel's problem, not
>> a DT problem.
>>
>
> Just give more input here. In previous time, we have long discussion [1];
> So actually your suggestion is exactly same what my old patch.
>
> From previous discussion, i think here have an assumtion: Use UEFI as
> bootloader, the kernel will ignore (or remove) memreserve and reserved-memory
> nodes, so just like Mark said "the EFI memory map to not list those
> as available to the kernel". My new patch is just to follow this and
> also make sure they have same behavior for different bootloader
> (between UEFI and uboot).

I've read thru the thread and see 2 main conclusions. Using
reserved-memory is problematic since things like grub don't support
that. That is fine and we should stick with /mem-reserve/ for now. The
other thing is the desire to have the memory presented to the kernel
be the same whether it comes from UEFI or DT structures. I can see why
there is some desire to have that alignment, but that doesn't really
buy us anything. We can't eliminate some code path in the kernel doing
so. So I still think that the memory node should reflect all of memory
as defined by the h/w and mem-reserve should be used for any software
defined reserved regions.

Rob