[PATCH] ARM: shmobile: henninger: remove board DT
Sergei Shtylyov
sergei.shtylyov at cogentembedded.com
Wed Oct 28 14:34:29 PDT 2015
The Henninger low cost board was never sold and so had no users outside
Renesas (and Cogent Embedded). Instead Renesas has made the Porter board
which has mostly similar hardware. Now that the Porter board support is on
par with Henninger, we can remove the Henninger's device tree file.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
---
This patch is against 'renesas-devel-20151028-v4.3-rc7' tag of Simon Horman's
'renesas.git' repo.
arch/arm/boot/dts/Makefile | 1
arch/arm/boot/dts/r8a7791-henninger.dts | 320 --------------------------------
2 files changed, 321 deletions(-)
Index: renesas/arch/arm/boot/dts/Makefile
===================================================================
--- renesas.orig/arch/arm/boot/dts/Makefile
+++ renesas/arch/arm/boot/dts/Makefile
@@ -530,7 +530,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
r8a7778-bockw.dtb \
r8a7779-marzen.dtb \
r8a7790-lager.dtb \
- r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
r8a7791-porter.dtb \
r8a7793-gose.dtb \
Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * Device Tree Source for the Henninger board
- *
- * Copyright (C) 2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Henninger";
- compatible = "renesas,henninger", "renesas,r8a7791";
-
- aliases {
- serial0 = &scif0;
- };
-
- chosen {
- bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif0;
- };
-
- memory at 40000000 {
- device_type = "memory";
- reg = <0 0x40000000 0 0x40000000>;
- };
-
- memory at 200000000 {
- device_type = "memory";
- reg = <2 0x00000000 0 0x40000000>;
- };
-
- vcc_sdhi0: regulator at 0 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI0 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vccq_sdhi0: regulator at 1 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI0 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-
- vcc_sdhi2: regulator at 2 {
- compatible = "regulator-fixed";
-
- regulator-name = "SDHI2 Vcc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vccq_sdhi2: regulator at 3 {
- compatible = "regulator-gpio";
-
- regulator-name = "SDHI2 VccQ";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
- gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
- };
-};
-
-&extal_clk {
- clock-frequency = <20000000>;
-};
-
-&pfc {
- scif0_pins: serial0 {
- renesas,groups = "scif0_data_d";
- renesas,function = "scif0";
- };
-
- ether_pins: ether {
- renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
- renesas,function = "eth";
- };
-
- phy1_pins: phy1 {
- renesas,groups = "intc_irq0";
- renesas,function = "intc";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
- renesas,function = "sdhi0";
- };
-
- sdhi2_pins: sd2 {
- renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
- renesas,function = "sdhi2";
- };
-
- i2c2_pins: i2c2 {
- renesas,groups = "i2c2";
- renesas,function = "i2c2";
- };
-
- qspi_pins: spi0 {
- renesas,groups = "qspi_ctrl", "qspi_data4";
- renesas,function = "qspi";
- };
-
- msiof0_pins: spi1 {
- renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
- "msiof0_tx";
- renesas,function = "msiof0";
- };
-
- usb0_pins: usb0 {
- renesas,groups = "usb0";
- renesas,function = "usb0";
- };
-
- usb1_pins: usb1 {
- renesas,groups = "usb1";
- renesas,function = "usb1";
- };
-
- vin0_pins: vin0 {
- renesas,groups = "vin0_data8", "vin0_clk";
- renesas,function = "vin0";
- };
-
- can0_pins: can0 {
- renesas,groups = "can0_data";
- renesas,function = "can0";
- };
-};
-
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-ðer {
- pinctrl-0 = <ðer_pins &phy1_pins>;
- pinctrl-names = "default";
-
- phy-handle = <&phy1>;
- renesas,ether-link-active-low;
- status = "okay";
-
- phy1: ethernet-phy at 1 {
- reg = <1>;
- interrupt-parent = <&irqc0>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- micrel,led-mode = <1>;
- };
-};
-
-&sata0 {
- status = "okay";
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vcc_sdhi0>;
- vqmmc-supply = <&vccq_sdhi0>;
- cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&sdhi2 {
- pinctrl-0 = <&sdhi2_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&vcc_sdhi2>;
- vqmmc-supply = <&vccq_sdhi2>;
- cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- clock-frequency = <400000>;
-
- composite-in at 20 {
- compatible = "adi,adv7180";
- reg = <0x20>;
- remote = <&vin0>;
-
- port {
- adv7180: endpoint {
- bus-width = <8>;
- remote-endpoint = <&vin0ep>;
- };
- };
- };
-};
-
-&qspi {
- pinctrl-0 = <&qspi_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- flash at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25fl512s", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <30000000>;
- spi-tx-bus-width = <4>;
- spi-rx-bus-width = <4>;
- m25p,fast-read;
-
- partition at 0 {
- label = "loader_prg";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition at 40000 {
- label = "user_prg";
- reg = <0x00040000 0x00400000>;
- read-only;
- };
- partition at 440000 {
- label = "flash_fs";
- reg = <0x00440000 0x03bc0000>;
- };
- };
-};
-
-&msiof0 {
- pinctrl-0 = <&msiof0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-
- pmic at 0 {
- compatible = "renesas,r2a11302ft";
- reg = <0>;
- spi-max-frequency = <6000000>;
- spi-cpol;
- spi-cpha;
- };
-};
-
-&pci0 {
- status = "okay";
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-};
-
-&pci1 {
- status = "okay";
- pinctrl-0 = <&usb1_pins>;
- pinctrl-names = "default";
-};
-
-&hsusb {
- status = "okay";
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
- renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
-};
-
-&usbphy {
- status = "okay";
-};
-
-&pcie_bus_clk {
- status = "okay";
-};
-
-&pciec {
- status = "okay";
-};
-
-/* composite video input */
-&vin0 {
- status = "okay";
- pinctrl-0 = <&vin0_pins>;
- pinctrl-names = "default";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vin0ep: endpoint {
- remote-endpoint = <&adv7180>;
- bus-width = <8>;
- };
- };
-};
-
-&can0 {
- pinctrl-0 = <&can0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
More information about the linux-arm-kernel
mailing list