[PATCH V4 0/8] PCI: ACPI: Setting up DMA coherency for PCI device from _CCA attribute

[Hanjun Guo]

Hi Rafael,

On 10/27/2015 11:27 PM, Rafael J. Wysocki wrote:
> On Tuesday, October 27, 2015 09:52:50 AM Bjorn Helgaas wrote:
>> Hi Suravee,
>>
>> On Wed, Oct 21, 2015 at 08:52:03AM -0700, Suravee Suthikulpanit wrote:
>>> This patch series adds support to setup DMA coherency for PCI device using
>>> the ACPI _CCA attribute. According to the ACPI spec, the _CCA attribute
>>> is required for ARM64. Therefore, this patch is a pre-req for ACPI PCI
>>> support for ARM64 which is currently in development.  Also, this should
>>> not affect other architectures that does not define
>>> CONFIG_ACPI_CCA_REQUIRED, since the default value is coherent.
>>>
>>> In the process, this series also introduces enum dev_dma_attr and a set
>>> of APIs to query device DMA attribute. These APIs replace the obsolete
>>> device_dma_is_coherent(), and acpi_check_dma().
>>>
>>> I have also included a patch from Jeremy posted here:
>>>      http://www.spinics.net/lists/linux-usb/msg128582.html
>>>
>>> This patch series  has been tested on AMD Seattle RevB platform.
>>> The git tree containing tested code and pre-req patches are posted here:
>>>
>>>      http://github.com/ssuthiku/linux.git pci-cca-v4
>>>
>>> Changes from V3: (https://lkml.org/lkml/2015/8/26/389)
>>>      * Clean up suggested by Bjorn
>>>      * Introduce enum dev_dma_attr
>>>      * Replace device_dma_is_coherent() and acpi_check_dma() with
>>>        new APIs.
>>>
>>> Changes from V2: (https://lkml.org/lkml/2015/8/25/549)
>>>      * Return -ENOSUPP instead of -1 (per Rafael's suggestion)
>>>      * Add WARN() when fail to setup DMA for PCI device when booting
>>>        ACPI (per Arnd's suggestion)
>>>      * Added Acked-by from Rob.
>>>      * Minor clean up
>>>
>>> Changes from V1: (https://lkml.org/lkml/2015/8/13/182)
>>>      * Include patch 1 from Jeremy to enable support for _CCA=0
>>>      * Clean up acpi_check_dma() per Bjorn suggestions
>>>      * Split the original V1 patch into two patches (patch 3 and 4)
>>>
>>> Jeremy Linton (1):
>>>    Honor ACPI _CCA attribute setting
>>>
>>> Suravee Suthikulpanit (7):
>>>    device property: Introducing enum dev_dma_attr
>>>    acpi: Adding DMA Attribute APIs for ACPI Device
>>>    device property: Adding DMA Attribute APIs for Generic Devices
>>>    device property: acpi: Make use of the new DMA Attribute APIs
>>>    device property: acpi: Remove unused DMA APIs
>>>    PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()
>>>    PCI: ACPI: Add support for PCI device DMA coherency
>>>
>>>   drivers/acpi/acpi_platform.c              |  7 +++++-
>>>   drivers/acpi/glue.c                       |  8 +++---
>>>   drivers/acpi/scan.c                       | 42 +++++++++++++++++++++++++++++++
>>>   drivers/base/property.c                   | 32 +++++++++++++++++------
>>>   drivers/crypto/ccp/ccp-platform.c         |  9 ++++++-
>>>   drivers/net/ethernet/amd/xgbe/xgbe-main.c |  9 ++++++-
>>>   drivers/of/of_pci.c                       | 20 ---------------
>>>   drivers/pci/probe.c                       | 36 ++++++++++++++++++++++++--
>>>   include/acpi/acpi_bus.h                   | 36 +++-----------------------
>>>   include/linux/acpi.h                      |  7 +++++-
>>>   include/linux/of_pci.h                    |  3 ---
>>>   include/linux/property.h                  | 10 +++++++-
>>>   12 files changed, 145 insertions(+), 74 deletions(-)
>>
>> I had a couple minor comments.  It's sort of a toss-up, but this feels
>> more ACPI-flavored than PCI, so I assume Rafael will take this whole
>> series unless I hear otherwise.
>
> I'll do that.

If Suravee address the comments and send another version,
an it be merged into 4.4?

Thanks
Hanjun