[PATCH v3 4/4] ARM: dts: Add Ethernet chip to SMDK5410

[Pavel Fedin]

The chip is smsc9115, connected via SROMc bank 3. Additionally, some GPIO
initialization is required.

Signed-off-by: Pavel Fedin <p.fedin at samsung.com>
---
 arch/arm/boot/dts/exynos5410-smdk5410.dts | 42 +++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index cebeaab..2a6a5ac 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -35,6 +35,17 @@
 		reg = <0x02037000 0x1000>;
 	};
 
+	ethernet at 07000000 {
+		compatible = "smsc,lan9115";
+		reg = <0x07000000 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpx0>;
+		interrupts = <5 8>;
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		smsc,force-internal-phy;
+	};
+
 };
 
 &mmc_0 {
@@ -61,6 +72,27 @@
 	disable-wp;
 };
 
+&pinctrl_0 {
+	srom_ctl: srom-ctl {
+		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
+			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	srom_ebi: srom-ebi {
+		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
+			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
+			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
+			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
+			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
+			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
 &uart0 {
 	status = "okay";
 };
@@ -72,3 +104,13 @@
 &uart2 {
 	status = "okay";
 };
+
+&sromc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
+	bank at 3 {
+		bank = <3>;
+		width = <2>;
+		srom-timing = <1 9 12 1 9 1 1>;
+	};
+};
-- 
2.4.4