[PATCH 1/2] i2c: mediatek: add i2c first write then read optimization
Liguo Zhang
liguo.zhang at mediatek.com
Tue Oct 27 01:59:26 PDT 2015
For platform with auto restart support, between every transfer,
i2c controller will trigger an interrupt and SW need to handle
it to start new transfer. When doing write-then-read transfer,
instead of restart mechanism, using WRRD mode to have controller
send both transfer in one request to reduce latency.
Signed-off-by: Liguo Zhang <liguo.zhang at mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 33 +++++++++++++++++++++++++++------
1 file changed, 27 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 9b86716..dc4aac6 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -132,6 +132,7 @@ struct mtk_i2c_compatible {
unsigned char pmic_i2c: 1;
unsigned char dcm: 1;
unsigned char auto_restart: 1;
+ unsigned char aux_len_reg: 1;
};
struct mtk_i2c {
@@ -153,6 +154,7 @@ struct mtk_i2c {
enum mtk_trans_op op;
u16 timing_reg;
u16 high_speed_reg;
+ unsigned char auto_restart;
const struct mtk_i2c_compatible *dev_comp;
};
@@ -178,6 +180,7 @@ static const struct mtk_i2c_compatible mt6577_compat = {
.pmic_i2c = 0,
.dcm = 1,
.auto_restart = 0,
+ .aux_len_reg = 0,
};
static const struct mtk_i2c_compatible mt6589_compat = {
@@ -185,6 +188,7 @@ static const struct mtk_i2c_compatible mt6589_compat = {
.pmic_i2c = 1,
.dcm = 0,
.auto_restart = 0,
+ .aux_len_reg = 0,
};
static const struct mtk_i2c_compatible mt8173_compat = {
@@ -192,6 +196,7 @@ static const struct mtk_i2c_compatible mt8173_compat = {
.pmic_i2c = 0,
.dcm = 1,
.auto_restart = 1,
+ .aux_len_reg = 1,
};
static const struct of_device_id mtk_i2c_of_match[] = {
@@ -373,7 +378,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
i2c->irq_stat = 0;
- if (i2c->dev_comp->auto_restart)
+ if (i2c->auto_restart)
restart_flag = I2C_RS_TRANSFER;
reinit_completion(&i2c->msg_complete);
@@ -411,8 +416,14 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
/* Set transfer and transaction len */
if (i2c->op == I2C_MASTER_WRRD) {
- writew(msgs->len | ((msgs + 1)->len) << 8,
- i2c->base + OFFSET_TRANSFER_LEN);
+ if (i2c->dev_comp->aux_len_reg) {
+ writew(msgs->len, i2c->base + OFFSET_TRANSFER_LEN);
+ writew((msgs + 1)->len, i2c->base +
+ OFFSET_TRANSFER_LEN_AUX);
+ } else {
+ writew(msgs->len | ((msgs + 1)->len) << 8,
+ i2c->base + OFFSET_TRANSFER_LEN);
+ }
writew(I2C_WRRD_TRANAC_VALUE, i2c->base + OFFSET_TRANSAC_LEN);
} else {
writew(msgs->len, i2c->base + OFFSET_TRANSFER_LEN);
@@ -461,7 +472,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
writel(I2C_DMA_START_EN, i2c->pdmabase + OFFSET_EN);
- if (!i2c->dev_comp->auto_restart) {
+ if (!i2c->auto_restart) {
start_reg = I2C_TRANSAC_START;
} else {
start_reg = I2C_TRANSAC_START | I2C_RS_MUL_TRIG;
@@ -518,6 +529,16 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
if (ret)
return ret;
+ i2c->auto_restart = i2c->dev_comp->auto_restart;
+
+ /* checking if we can skip restart and optimize using WRRD mode */
+ if (i2c->auto_restart && num == 2) {
+ if (!(msgs[0].flags & I2C_M_RD) && (msgs[1].flags & I2C_M_RD) &&
+ msgs[0].addr == msgs[1].addr) {
+ i2c->auto_restart = 0;
+ }
+ }
+
while (left_num--) {
if (!msgs->buf) {
dev_dbg(i2c->dev, "data buffer is NULL.\n");
@@ -530,7 +551,7 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
else
i2c->op = I2C_MASTER_WR;
- if (!i2c->dev_comp->auto_restart) {
+ if (!i2c->auto_restart) {
if (num > 1) {
/* combined two messages into one transaction */
i2c->op = I2C_MASTER_WRRD;
@@ -559,7 +580,7 @@ static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id)
u16 restart_flag = 0;
u16 intr_stat;
- if (i2c->dev_comp->auto_restart)
+ if (i2c->auto_restart)
restart_flag = I2C_RS_TRANSFER;
intr_stat = readw(i2c->base + OFFSET_INTR_STAT);
--
1.8.1.1.dirty
More information about the linux-arm-kernel
mailing list