[PATCH 3/4] ARM: dts: Add Ethernet chip to SMDK5410

Pankaj Dubey pankaj.dubey at samsung.com
Mon Oct 26 21:15:14 PDT 2015


Hi Pavel,

On Monday 26 October 2015 05:17 PM, Pavel Fedin wrote:
> The chip is smsc9115, connected via SROMc bank 3. Additionally, some GPIO
> initialization is required.
>
> Signed-off-by: Pavel Fedin <p.fedin at samsung.com>
> ---
>   arch/arm/boot/dts/exynos5410-smdk5410.dts | 42 +++++++++++++++++++++++++++++++
>   1 file changed, 42 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
> index cebeaab..154e37b 100644
> --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
> +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
> @@ -35,6 +35,17 @@
>   		reg = <0x02037000 0x1000>;
>   	};
>
> +	etherhet at 07000000 {

%s/etherhet/ethernet/

> +		compatible = "smsc,lan9115";
> +		reg = <0x07000000 0x10000>;
> +		phy-mode = "mii";
> +		interrupt-parent = <&gpx0>;
> +		interrupts = <5 8>;
> +		reg-io-width = <2>;
> +		smsc,irq-push-pull;
> +		smsc,force-internal-phy;
> +	};
> +
>   };
>
>   &mmc_0 {
> @@ -61,6 +72,27 @@
>   	disable-wp;
>   };
>
> +&pinctrl_0 {
> +	srom_ctl: srom-ctl {
> +		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
> +			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
> +		samsung,pin-function = <2>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	srom_ebi: srom-ebi {
> +		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
> +			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
> +			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
> +			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
> +			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
> +			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
> +		samsung,pin-function = <2>;
> +		samsung,pin-pud = <3>;
> +		samsung,pin-drv = <0>;
> +	};
> +};
> +
>   &uart0 {
>   	status = "okay";
>   };
> @@ -72,3 +104,13 @@
>   &uart2 {
>   	status = "okay";
>   };
> +
> +&sromc_0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
> +	bank at 3 {
> +		bank = <3>;
> +		width = <2>;
> +		srom-timing = <1 9 12 1 9 1 1>;
> +	};
> +};
>

Thanks,
Pankaj Dubey



More information about the linux-arm-kernel mailing list